Search results

  1. Legendary

    Sorry guys..

    Anybody know of a place (or website) to get some tires cheap?
  2. Legendary

    Sorry guys..

    AS of now my fronts rub with 225/60/15. So I might take the 235/45/17 route for the fronts.
  3. Legendary

    Vacuum Reservoirs?

    Check valve? How does this thing install. I did a quick google search but turned up nothing.
  4. Legendary

    Vacuum Reservoirs?

    These canisters suppose to help out vacuum issues with your brakes when you're running a cam. DO they actually work? I've never seen anybody with it on there cars or even ask about them. I'm looking at the ones from summitracing.com (part# sum-g1464). I did develop an issue when I had my set...
  5. Legendary

    Sorry guys..

    So safe to say 245/45/17 up front and 275/40/17 in the back should be fine. I wonder if I should go smaller than the 275/40. I have 275/50/15 on the car now and it rubs when I corner the car or the rear drives up on an incline at an angle. Would I have that same problem? What's the next...
  6. Legendary

    battery relocation, post pics please

    You can check my sig for pics. Too lazy to link them at the moment.
  7. Legendary

    Upgrading to 73mm front brakes

    He went back and edited it.
  8. Legendary

    Sorry guys..

    nudge.
  9. Legendary

    Sorry guys..

    Would it be good to go as wide as 275's in the back?
  10. Legendary

    Upgrading to 73mm front brakes

    My price list: tc rear end: 175 (I removed the brake parts and sold the gear and housing for $100 bucks) MC & booster: 55 (ebay) 91 Crown vic police calipers: 60 Matt's stuff: 60 shipped (fittings, 3-2 conv, ebrake handle) rear caliper brackets: 150 shipped parking brakes cables: 60...
  11. Legendary

    Upgrading to 73mm front brakes

    I know you need the conversion with the new 2 port MC but you didn't list it on your first post. I thought you were sticking with the stock MC. I'm doing the 73mm front and rear calipers tomorrow. I've got my kit and brake handle from Matt. He answered all my emails and was very helpful.
  12. Legendary

    Upgrading to 73mm front brakes

    3-2 conversion isn't need unless your going with calipers in the rear also. Right??
  13. Legendary

    Sorry guys..

    Hate to gay up the forms with a tire size thread but I did a search and the limited two pages gave me around about size but nothing for certain. I just purchased some cobra r rims. 17x8 in front and 17x9 in the back. What's a good tire size to run with? So far I gathered 245 or 255/40 or...
  14. Legendary

    Cheapest place for E-Brake Cables for Rear Disk? 5 lug Question

    I went and brought the 91 front calipers for a crown vic (steel piston police package). They look pretty huge! They bolt right up right?
  15. Legendary

    95 or 130 amp alternator?

    No less than 130 for sure. I run an electric fan and have a system and I sometimes think my 130a isn't enough with the headlights on at night.
  16. Legendary

    Hood latch, 5.0

    When you press on the gas it spins the alternator faster and that gives out more charge. When the car idles down the charge will also slightly decrease. You pretty much get the fume smells if exhaust mods are done to the car. You'll get use to them. Just make sure it isn't a gas leak...
  17. Legendary

    Hood latch, 5.0

    Try adjusting the part that is bolted to the frame. Loosen the bolts and play with it. Also get some hood pins. Too many hoods flying up and damaging cars around here. They could save yours or somebody elses life.
  18. Legendary

    How easily anyone can get at our engine!

    I've known somebody that had their intake stolen. They have a hood lock that locks the hood at the latch part. You need to unlock from the inside of the car with a key.
  19. Legendary

    Need storker opinions

    I'll shoot you an email. I'm far from buying anything right now but I like to do my research early and start saving up! They have a website? I always see companies in the magazine ads. Any more good kits?
  20. Legendary

    3-2 port m/c conversion

    Off of matts page. He's been very helpful. I plan on doing my conversion this weekend. http://svo73mm.cjb.net/
Top Bottom
Back
Forums
Menu