Search results

  1. dcurtis

    Smog Delete Belt Length

    Yeah, 84.5 is right, just rechecked mine and thats it.
  2. dcurtis

    Smog Delete Belt Length

    It should be 73.5. done this a while back. pretty sure thats what I got.
  3. dcurtis

    Do I need pushrod guide plates?

    i personally would get them, stock or not.
  4. dcurtis

    Neighbor Chipped the paint on my Hood mowing lawn

    what he said:chair:
  5. dcurtis

    Valve Adjustment Question

    you need to do them in order with the firing order, start with number 1 on compression stroke, and then just follow the firing order rotating the crankshaft 90 degrees for each.
  6. dcurtis

    New here. Have a few question about my 92 5.0lx

    You may need to adjust the detent cable.
  7. dcurtis

    Best oil pump and pump drive shaft.

    I have, they are fine, it was only driven for maybe 30 seconds once the pressure dropped.
  8. dcurtis

    Best oil pump and pump drive shaft.

    Well I pulled the pump apart and after prying the 4 pointed gear away from the 5 point gear there was what looked like gasket material wedged in there causing the lockup, just waiting.on the new one, hopefully she will be running this weekend. Also got a new pickup for it, and gonna clean the...
  9. dcurtis

    Best oil pump and pump drive shaft.

    I just ordered another arp shaft and a melling m10687, i think that was the part number, i also have another m68, which pump would be better, not sure on the clearances, a well known shop about 40 miles from me done the bottom end, they run a 800 horse 67 mustang so they know fords, stock pan...
  10. dcurtis

    Serious suspension upgrades/packages recommendations

    With 5-7k I would go with a good tubular k member and a arms, coil overs, and for the rear there are many good companies, granatelli, bbk, steeda, maximum mototsports.
  11. dcurtis

    Best oil pump and pump drive shaft.

    Well I finally decided to pull my engine due to no oil pressure for the second time, first was due to a popped oil galley plug, this time the oil pump locked up and twisted my arp shaft off, first drive since i replaced the galley plug, so I was just wondering what is the best pump and shaft to...
  12. dcurtis

    Correct push rod length?

    Took another look and it looks like.you need a longer pushrod to me. What's your combo?
  13. dcurtis

    Correct push rod length?

    Not close enough, should be centered.as.close as possible or you will wear your valve guides faster. Can't tell from the pic, what side is facing the exhaust?
  14. dcurtis

    new 347 lost all oil pressure

    Well, it lost pressure again, pulled the timing cover and timing gears to find the plugs are all still in this time, any other plugs i should look for or maybe the oil pump went, i think im gonna pull the engine and tear it all the way apart and thread all the plugs and install a new pump...
  15. dcurtis

    New 347 Lost Oil Pressure-Again

    First time it was simply one of the 3 galley plugs, installed a new one, test drove and was fine until I got on it again, this time I pulled the timing cover the 3 plugs were still in place, what now? Possibly the one under the intake, the rears are already threaded, or maybe the pump went? Will...
  16. dcurtis

    I need help, nobody can answer this!! Im rarely stumped!

    Wouldn't that cause a constant vaccum to the egr, not sure about speed density cars but maf cars get vac from the tab tad solenoids on the passenger strut tower don't they? That would cause the erratic idle and temp. EGR does not need constant vaccum.
  17. dcurtis

    I need help, nobody can answer this!! Im rarely stumped!

    where do you have vacuum hooked to your egr from?
  18. dcurtis

    EGR Spacer Coolant Line

    it comes off of the black hard line that bolts down on the passenger side of the intake, don't knowwhat its called, comes off water pump and runs back to heater core connections.
  19. dcurtis

    Stang shut's off??

    I second that, the same thing was happening to mine about 2 years ago. Changed the tfi and hasn't happend since.
  20. dcurtis

    new 347 lost all oil pressure

    Yes, it was sealed and staked, I have 9 days of vacation I need to use so I will probably start on it again next weekend.
Top Bottom
Back
Forums
Menu