Search results

  1. Spreadman

    Dome light wont turn off

    And this guy knows. Listen to him people. Ya might learn a thing or two. ;) I'm having the same problem with mine. I ordered a new pin from Ford and will install it when I put more dynamatt on my doors. For right now I just took out the bulb. Car doesn't get driven a whole lot at night. :)
  2. Spreadman

    what kind of motor oil do you all use?

    8 quarts Valvoline 5w-30 and Fram toughguard filter.
  3. Spreadman

    steeda says yes maximum motorsports said no...

    Werd
  4. Spreadman

    Pop-pop-poppin' sounds when turning right

    If the bushings don't fix it, then it's probably the outer tie rod end. $30ish from Ford. Easy fix.
  5. Spreadman

    Couldnt get the old shifter off to install the MGW!!!! :(

    I was about to ask if you remembered to remove all the bolts. :p But you got it. Congrats. :D
  6. Spreadman

    Battery goes dead in 5 days! Any ideas???

    Cars will drain batteries if they sit for a week or more. It's due to all the electronics on board. And if you have an alarm, it will draw even more. My car did the same thing. Best thing to do is unhook the negative terminal altogether before you leave the car to sit. OR, if your car...
  7. Spreadman

    Has anyone tried the Energy suspension tranny mount?

    I've got their endlinks and swaybar bushings....as well as A-arm bushings. I have Prothane tranny and motor mounts. I can't comment on the noise level as the exhaust and blower are louder than the tranny.
  8. Spreadman

    widest tire on 17x9

    Lemme wash it first. :)
  9. Spreadman

    different size wheel in front then back...

    I've seen it, no picts though. I plan on doing it with my 03 Cobra rims. I think it'll look awesome. Actually, here's one.
  10. Spreadman

    Newbie question but...

    I know my code wasn't on the door sticker. I had to get it off the computer. It will be 4 digits. Mine was GTG2.
  11. Spreadman

    Use flowmaster 40's on Magnaflow catback?

    It's highly unlikely you'll be able to swap mufflers without welding.
  12. Spreadman

    4.10's or 4.30's... Need some help, which is best for me?

    Do not phear the gear. With a vert I'd go 4.30's. A friend of mine had 4.10's in his vert and it didn't "feel" fast to me. I had 4.10's in my coupe, and it felt much quicker than his.
  13. Spreadman

    Which Projector Headlights?

    Here's a request for the projector owners. Could you take a pict of the car at night? Shine the lights on the garage door to show the cutoff line of the beam. Show the illumination of the road to see the coverage. Also so front shots of the car with the lights on would help. Thanks.
  14. Spreadman

    SHM sells Kenne Bell Superchargers?

    MPH is a licensed dealer for KB. In fact, Tim is the only shop getting prototype blowers and doing R&D for them.
  15. Spreadman

    Bullit intake question

    To answer your last question. Yes. Might even go 500. :D
  16. Spreadman

    widest tire on 17x9

    I'm running Nitto 315 drag radials on mine. They bulge out a little bit, but not bad. I DO have to roll the fenders though for when I hit big bumps. Just remember that Nitto's DRs aren't true 315's....they're a little narrower than claimed. I would run a regular 285 radial as the widest on a...
  17. Spreadman

    Car is finally done.

    That's ok. I'm going to post trip picts and etc here. I'll post the specifics after I pick her up with vids and picts.
  18. Spreadman

    Car is finally done.

    Took off the Magnaflow catted X and added BBK Longtubes and Dr Gas offroad X.
  19. Spreadman

    Car is finally done.

    13# of boost. 505rwhp, 452rwtq. Purrin' like a kitten. I'm flying out on Saturday to pick her up. (giddy)
  20. Spreadman

    BBK o/r X-pipe + flowmasters = Stink and TOO FREAKING LOUD

    Sounds like you got treated real well at the Midas. But do yourself a favor. Watch those tailpipes. They probably weren't stainless steel, so they will rust from the inside out. Just be careful.
Top Bottom
Back
Forums
Menu