Search results

  1. onefstsnake

    Turn Signals Not Working

    That fixed it! I remember a while back when replacing the headlight and hazard switch, some of the wires were pushing out of the connector. Thanks! :nice:
  2. onefstsnake

    Turn Signals Not Working

    Well I havent driven the car much in 6 months. But for a while now the turn signals havent been working. Well they might work for a few minutes but after that they wont work at all. Ive replaced both the turn signal and hazard flasher units, and the hazards do work. So its either the...
  3. onefstsnake

    December 2009 FOTM Vote!!!

    Damn I lost lol. Thanks for all the Votes though.
  4. onefstsnake

    SPRINGS for Convertible??

    I know from the factory the shocks and springs were different. But alot of aftermarket companies dont specify. I went with Steeda Sport springs, not too harsh of a ride and a good company.
  5. onefstsnake

    December 2009 FOTM Nominations

    Well quite a bit has changed since those pics. Here are a few more recent pics. Interior- sorry I dont have a better pic. My radio got ripped out so the dash looks like ****... Just some 04 Cobra seats. Engine Bay- Ive since added a 70mm Accufab, MSD wires, MSD dist., and an...
  6. onefstsnake

    Bad Vibration at 70+ MPH

    Yeah there is a local driveline shop that Im going to call and see if they can fix the DS. Seals are good. Im actually kinda glad its just the DS and not something in the rear end.
  7. onefstsnake

    Bad Vibration at 70+ MPH

    Driveshaft is bent. I put it on a lift and lifted the rear susp. up and let the tires roll a bit and you can see the DS wobble. Hopefully I can get it straightened out....
  8. onefstsnake

    Bad Vibration at 70+ MPH

    Ive tried two different sets of wheels/tires and still get the exact same vibration. And the DS is a FMS Aluminum piece w/ good u joints. I might try just flipping the DS around and see if it helps but since its not a factory DS it wont be balanced to the car...
  9. onefstsnake

    Bad Vibration at 70+ MPH

    Mounts are fine as are seals. Would a driveline angle problem cause a vibration over a certain speed and not before that speed?
  10. onefstsnake

    Bad Vibration at 70+ MPH

    Shifter. But I can downshift or put the car in neutral and the vibration is still there.
  11. onefstsnake

    Bad Vibration at 70+ MPH

    I havent tried rotating the driveshaft 180* but with an aftermarket DS I wouldnt think this would do anything since the DS is balanced off the car. Also I havent checked the steering rack, but I dont get much vibration in the wheel.
  12. onefstsnake

    Bad Vibration at 70+ MPH

    Well Ive searched and have found alot of great info but nothing to solve my vibration problem. Car is a 93 Coupe. TKO 600 trans, FMS Aluminum DS, Auburn Pro Locker, 31 Spline axles, and FMS 4.10 gears. Vibration happens at 70mph and continues at higher speed but doesnt get worse. No...
  13. onefstsnake

    Soft Brakes Bad Booster?

    there is no air in the system. I pressure bled them after installing the MC and calipers. Ill have to check the vacuum. I really dont want to change the booste lol.
  14. onefstsnake

    PBR front Calipers w/ stock rear drums?

    Im running the same setup. 99GT calipers up front and stock drums in the rear. Up untill a month ago it was working great. Now the rest of the brake system is showing its age... :( But going to a bigger MC wont hurt anything.
  15. onefstsnake

    Soft Brakes Bad Booster?

    Well a little history on what ive done. I recently replaced the front calipers w/ new ones and new pads, all new hardware. I also replaced the MC. I completely flushed all the old fluid out and bled all 4 corners and bench bled the MC. Now when the car is off the pedal feels very firm...
  16. onefstsnake

    Gaugeplates.com...

    Im not looking to get a new one from them. Going to re install my old stuff. Just gotta order the ac controls.
  17. onefstsnake

    Gaugeplates.com...

    I bought their A/C Relocation panel about a week ago. Today I decided to install it. Out of the box it looks great. Fits decent. A/C Controls are pretty hard to move down to the bottom. Had to lengthen all of the vacuum lines. Had a wiring connector fall apart... So I got my...
  18. onefstsnake

    93 Gt Airbag light question

    somehow I doubt a SN95 clock spring will work.
  19. onefstsnake

    93 Gt Airbag light question

    old thread but the 93 clock spring is different than 92 cars. its part number F3ZZ14A664A but is obsolete and Ford doesnt have them. I failed state inspection b/c of the same code 34... So Im not sure how I can get it to pass since no one makes or has a new 93 mustang clockspring...
  20. onefstsnake

    steeda rear strut tower brace

    I dont have one nor have I seen one on a fox. Doesnt seem like it would do much. Unless you are heavily moddifying your suspension and doing hardcore road racing. Maybe on a vert it would help some.
Top Bottom
Back
Forums
Menu