Search results

  1. 1984Convert

    Help! Engine misfire 2000 Mustang 4.6

    Ok, I loaned a scanner from Autozone. No codes are showing. after running the engine for 10 mins or so. Jeeezz, I was hoping for a some clues. I cleaned all of the electrical connectors under the hood. No change, the headers for cyls 1,3,4 still at room temp when running cyl 2 maybe 10 degrees...
  2. 1984Convert

    Help! Engine misfire 2000 Mustang 4.6

    Ok, I moved the coils and injectors from the drivers side to passenger side. No change - passenger side headers still cold. I noticed the large harness connector in the right corner of the engine bay had some corroded pins. Did a quick cleaning and still no change. I'm going to do a better...
  3. 1984Convert

    Help! Engine misfire 2000 Mustang 4.6

    I don't have a scanner, will have to rent or borrow one. Would there be codes to read even when the check engine light has not come on yet? The compression test was the leakdown type where I screwed the gage into the plug hole and then cranked the engine. It was around 115 lbs cranking for...
  4. 1984Convert

    Help! Engine misfire 2000 Mustang 4.6

    The 2000 4.6 has the coils on the plugs - no plug wires.
  5. 1984Convert

    Help! Engine misfire 2000 Mustang 4.6

    I tested the coils in their location using one of those test sparkplugs. All seemed to have a pretty good blue spark. The coils are all original Ford units, the injectors are original Ford too. I tried one brand new injector on the side that is not running. The wiring harness is original. The...
  6. 1984Convert

    Help! Engine misfire 2000 Mustang 4.6

    I just installed a rebuilt 4.6 in my 2000 Mustang. It seems to have a miss. When I check the long tube header tubes on the passenger side they are room temperature, the ones on the drivers side 200+ degrees. It seems like the passenger side of the engine is not running. I have checked all of the...
  7. 1984Convert

    factory stripe removal

    stripe removal 3m makes a spray that removes the stripes. It does not hurt the clearcoat.
  8. 1984Convert

    How to replace center AC vents?

    I bought a new center AC vent section autographed by Carroll Shelby for my 2007 GT 500. How do I get remove the old one? It looks like the airbag and gage cluster have to come off first. How do they come off?
  9. 1984Convert

    Which carb? Im confused.

    I tried a Holey 670, a demon 750 and then ended up with a Demon 650 on my 347. The 750 wasn't as crisp as the 650 was on my engine. The Demon is superior to the Holley in craftsmanship and performance. It uses Holey parts (gaskets,jets,everything), but has cleaner castings and billet baseplate...
  10. 1984Convert

    17x10.5 Bullitt's installed!! pics inside....

    17x10.5 Bullitt's installed!! Where did you get them?
  11. 1984Convert

    HP from long tube headers

    Longtubes Do longtube headers get rid of that annoying resonation at 2000 rpm?
  12. 1984Convert

    1984 Convertible weatherstrip

    They have it, it's a relief just to be able to find it - it's expensive though (over $100 ea). If anyone has any other sources please let me know.
  13. 1984Convert

    1984 Convertible weatherstrip

    Weatherstrip Thanks, looks like they might have it.
  14. 1984Convert

    1984 Convertible weatherstrip

    Does anyone know where I can get the outer door window beltline trim for an 84 Convertible? The beltline trim is the felt/rubber that goes between the window and the door. I've been checking all of the online Mustang vendors but have not found it yet. I tried Ford too, they no longer have it.
View older results
Top Bottom
Back
Forums
Menu