Search results

  1. Labora

    Paint and Body Ceramic coatings on paint - who’s used what

    I've used Chemical Guys and F11 top coat on the seedos/boat. Does help water bead off better than wax other than that can't say much, Wax/coat them once a year. Chemical guys goes on like wax, f11 is spray bottle and easier to apply.
  2. Labora

    03 Cobra wheels chrome vs polished

    Polish wheels will be powder coat clear, very common and easy to up keep just like a painted wheel. Use Wax/Sealer no problem. Chrome is great as long as it is new soon as it gets oxidation or chipping it is done and not much you can do short of paying big $$$ to have it fixed. Personally...
  3. Labora

    Ever seen a mid-engine fox?

    Interesting build. A lot of trouble to move engine back, wonder what other updates they made to the suspension design.
  4. Labora

    Electric water pumps HP gain?

    Good to hear. I'll be looking to do something similar next time around.
  5. Labora

    1995 Gt Rubber Fuel Lines

    Solid info as always, I just ordered a few of the OEM to AN fitting adapters and got the wrong size on one so will have to review what I actually need and try again.
  6. Labora

    WTB/Trade Saleen 94-95 taillight covers

    I just passed some up in a junkyard over the weekend. Almost bought them for the novelty.
  7. Labora

    Build Thread Project Phoenix (94 Cobra) Part 2

    Rear in after a few trips to the hardware store. Next will be driveshaft, new gas tank+pump and have to decide what to do with rear abs sensors.
  8. Labora

    Electric water pumps HP gain?

    Post back after you've had some use out of it, I just bought a brand new mechanical pump for my current setup but a lil booster pump to run in the pits would be nice.
  9. Labora

    Electric water pumps HP gain?

    Perhaps the hose can but it is poor design and unnecessarily risking a failure point. Should be easy to remedy with a homemade brace of some sort. With the pump being less than 200$ that is a tempting addition to any setup if it is reliable.
  10. Labora

    Electric water pumps HP gain?

    Interesting, don't care for the mounting on the lower hose with no support to speak of.
  11. Labora

    Electric water pumps HP gain?

    That is a interesting idea, would be nice to see some real world feedback on the setup. Many cars now have small remote pumps that can help coolant flow under certain situations.
  12. Labora

    Build Thread Project Phoenix (94 Cobra) Part 2

    Welded in, grinding some ugly spots and painted. This weekend rear end goes back in.
  13. Labora

    Build Thread Project Phoenix (94 Cobra) Part 2

    Here is a quick update and a tid bit for any future search. I just finished up the install on the Competition Engineering C8015 Torque Box Lower Reinforcement Plates these are listed as fitting 79-04. I test fit on a 93 hatch and they sit flat and would require almost no work to use, BUT the...
  14. Labora

    Ever get yelled at for doing things the right way?

    That line of BS is why I'm terrified of doing side work. No your car was a hunk of junk before I fixed a-c, d-f are not related.
  15. Labora

    1997-possible problems with wheel

    K member is probably bent too.
  16. Labora

    Build Thread Project Phoenix (94 Cobra) Part 2

    Still working on the rear end, got the Upper plates in and painted and the lowers in and welded. Stitch welded the uppers and lowers. Waiting to paint the lowers until I can get the competition engineering plates fitted. Is going to require cutting some spot welds because 94-95 are bastard year...
  17. Labora

    Exhaust 1995 ford mustang gt 5.0 header question

    The other way to trick the EGR is to stick the plunger down half way permanently. Will usually let the CEL turn off the majority of the time, ran my car like this for long time.
  18. Labora

    Help with alternator!!!!!!

    Not sure what you consider high output. I've had a few 200AMP alternators before and only other thing I did was go to larger ground/power wires.
  19. Labora

    Build Thread Project Phoenix (94 Cobra) Part 2

    Rear end put mostly back together today. Need some crush washers for the new brake lines. Next step will be the tq boxes.
  20. Labora

    Coupe prices... what the heck

    They are classics now, everything nice from the late 80's is seeing a up kick in price the last few years.
Top Bottom
Back
Forums
Menu