Search results

  1. Labora

    1995 Cobra R Engine (351) Need Info

    If the current HCI combo is laying down 430hp with a bad carb, I would consider that a stock Cobra R intake may be a bit of a bottleneck.
  2. Labora

    Return line fuel clip (NEED PART NUMBER?!)

    Hell yes, you rock. That first picture looks exactly like what I need, and according to my Ford paperwork (From one of the dealerships I visited.) the one I need is a 3/8ths. I owe ya big man, saved my sorry ass twice now. :rlaugh:
  3. Labora

    Return line fuel clip (NEED PART NUMBER?!)

    I've got a 94 that I'm working on, I've done a good bit of work to it and the last bit that I've come to is the fuel lines. (This is the last thing stopping me from starting the car!) The rubber lines that go from the hard lines near the firewall to the fuel rails look to be in good shape and I...
  4. Labora

    throttle cable 96-98 cobra = bullitt ?

    Bump for helping a Mustang friend. He recently came into a Bullitt intake setup very cheap, only thing missing is the throttle and cruise control cables. What is the solution for this, had no luck finding one used and the dealerships have run out of them ages ago. I assume lokar or someone...
  5. Labora

    Lost my spout connector! Help!!!!!

    Paper clip with some electrical tape will get ya by also. :P Used that for a hour or two until I started banging on the fender (where the spout fell into) and it actually fell out. :D
  6. Labora

    Project Phoenix (94 Cobra)

    Still working on this, seems like the last little bits are slowing me down. Car now has all the wiring harnesses on but not all plugged in and some still need to be extended. I moved the fuse block to where it will be hidden in the fender, and I've spent a good deal of my time hiding...
  7. Labora

    Destroyed Third gear last night, help

    Depends what your broke, find a good transmission guy and have them look it over. (Hard to find a good shop thou!)
  8. Labora

    Where does this connect to.... PICS!

    That is the oil sending unit plug, the plug on that harness that has the most pins plugs in to a plug next to the timing cover that comes down from the injector harness.
  9. Labora

    New dizzy... Still stalls out

    Just because you got a new distributor does not mean the one you replaced it with is good. If you can get your hands on a friends car that you can swap parts from it is worth a try. Good luck.
  10. Labora

    95 gt spark problem need advice

    If the distributor you got is a rebuild or reman one from a local parts store I would start by throwing it in the trash and getting a Ford one. But maybe that is just me, I've had horrible luck with rebuilt ones...
  11. Labora

    Project Phoenix (94 Cobra)

    I am still working on the car these days. The engine/transmission are now in the car, took me a few days to sort out a issue with the transmission mount, but I ended up finding the missing piece and everything is in and looks good. Only thing missing from that pic is the upper intake which...
  12. Labora

    engine shampoo now car is acting weird

    Dry out the inside of the cap like he said. Then spray the inside with WD40, should fix you up the majority of the time.
  13. Labora

    Transmission won't line up with crossmember using ES mounts

    Man that helps a ton! Thanks! It looks like I need that stupid metal plate to move the mount back a few inches. Right now I'm bolting the mount strait to the transmission. And if I'm looking at it correctly I should be bolting it to that plate which would move it back a few inches into the...
  14. Labora

    Transmission won't line up with crossmember using ES mounts

    Whole drivetrain is from my 95 Cobra. So it should be a sn95 bell. I called ES today and they confirmed the transmission mount I got was the correct one. I'm unsure about the motor mounts because I forgot to ask him. :nonono: Probably going to end up buying some stock mounts and seeing what...
  15. Labora

    Transmission won't line up with crossmember using ES mounts

    How would you align it? It just bolts on and no matter which way you put tranny mount on does not effect where the bolt holes end up? It would be helpful to see a SIDE shot of one if possible. The mount they sent me the holes for the tranny line up with the holes that connect to the tranny...
  16. Labora

    Transmission won't line up with crossmember using ES mounts

    You are correct this is in the 94. Which is a stock Cobra drive train as far as fitment should be concerned. I flipped both cross members I had (They look the same) both directions. Putting it what I assume is backwards actually makes it a tiny bit closer but not enough to make work. Top R =...
  17. Labora

    Transmission won't line up with crossmember using ES mounts

    They are on the correct side, they are laying flat in the kmember and both of them have the locating pin going thru just fine.
  18. Labora

    Can't mount trans! 1994 gt

    I'm having a similar problem. OP ever figure out what caused this or what mounts you happened to be using? http://forums.stangnet.com/787515-transmission-wont-line-up-crossmember-using-es-mounts.html
  19. Labora

    Transmission won't line up with crossmember using ES mounts

    I spent all day yesterday trying to get my motor/tranny in the car correctly. Getting the motor mounts in the slots on the kmember wasn't issue but even with everything squared up correctly the transmission mount always sits about 1-1.5 inches to far forward to get the bolts through the slots...
  20. Labora

    rear mount twin turbo

    Save your money and get a nitrous kit. Rear mounts are such a waste of time IMO.
Top Bottom
Back
Forums
Menu