Search results

  1. S

    first time out what do ya think?

    Tonight was the first time out in my car the track wasnt great. I was spinning way too much but here is my best slip, with this mph what would you guess the car could do if I could drive it... rt .030 60' 2.237 330 5.731 1/8 8.523 mph 89.07 1000 10.886 1/4 12.891 mph 113.71
  2. S

    Subframe install + dyno in Indy?

    Full Throttle Performance in Indy he seems to know what hes doin
  3. S

    Schreech/poping sound

    I just took my amp and subs out of my 94 gt and put them into my 00 gt now it pops and squeels when I turn the radio on. I have the mach 460 in both cars. The wiring was already ran in the oo by the pevious owner but it is a show car so I'm sure everything was ran right. Any ideas?
  4. S

    390rwhp = ? 1/4

    What should a procharged 10psi 00 GT with 390rwhp stock gears run on street tires in the 1/4?
  5. S

    stock trans any good?

    How much hp is the stock trans good for in a 2000 gt? Is it at t-45? I thought I heard they were good for 300 rwhp? is it true? thanks
  6. S

    my a/c just died :(

    I had the same problem and I fixed the hose which was broke and it still only blows through the defroster and floor...what else would cause this?
  7. S

    ac vents dont work...

    Thanks alot guys I'll try that tonight!
  8. S

    AC vents dont blow...

    i have a 94 gt and today the it deceided that all of the air settings = floor and defroster. If I turn it to AC or MAX AC its cold but it doesnt blow through the vents only the defroster ad floor. Any ideas what i need to do to fix this?
  9. S

    ac vents dont work...

    i have a 94 gt and today the it deceided that all of the air settings = floor and defroster. If I turn it to AC or MAX AC its cold but it doesnt blow through the vents only the defroster ad floor. Any ideas what i need to do to fix this?
  10. S

    Attention Indiana Mustangs!!!

    I know alot of them surf the corral.net forums post there too
  11. S

    Attention Indiana Mustangs!!!

    contact southside mustangs there should be able to round up several www.southsidemustangs.com
  12. S

    convertible top ripping...

    My top is starting to tear has anyone had luck fixing this problem before it turns into a big hole? I have a 3 inch rip that is not completly torn apart yet , How can I fix this? Thanks
  13. S

    Convertible Top ripping..

    My top is starting to tear has anyone had luck fixing this problem before it turns into a big hole? I have a 3 inch rip that is not completly torn apart yet , How can I fix this? Thanks
  14. S

    Convertible top ripping...

    My top is starting to tear has anyone had luck fixing this problem before it turns into a big hole? I have a 3 inch rip that is not completly torn apart yet , How can I fix this? Thanks
  15. S

    Help! Belt problems!!

    yes it does thanks matt
  16. S

    Help! Belt problems!!

    I have a 94 with with bypass smog and an underdrive pulley on the crank. I have had it like that for 20K miles. Just recently My belt has been slipping off the tensior pulley and getting wedged there and shredding. It has done it several times now. What is the deal? Would pulleys just...
  17. S

    can it be?!...is he finally gonna order them??

    Be ready to replace the ABS sensors I think they are about 60 bones a peice but with only 67K you may get lucky and not have to
  18. S

    how much does mid 13's cost?

    I conisdering buying a 99 or 00 GT what mods will I need to do to it to get it to run 13.5's without a power adder and on street tires. Also I will be doing lots of highway driving so the gears I would want would be 3.73 or even a 3.55. What are your thoughts?
  19. S

    size of temp sensor on cold air??

    5/8 will fit like a glove. I didn't drill a hole for the tube that comes from the oil fill. Do I need to? I just made mine tonight. So I haven't been out much with it on yet
  20. S

    Please help homemade CAI

    I am useing the stock MAF does the rubber fittings both need to 3" or does one of them need to go from 3.5 or 4" down to 3" Thanks
Top Bottom
Back
Forums
Menu