Search results

  1. rustang94

    Do your ford racing roller rockers make noise??

    I have ford racing pedestal mounted roller rockers with stock size harden push rods so I just torqued them down on my gt40p heads. I had just roller tip rockers before but made no noise. I heard that some noise is normal Is this true? I'll see If I can get the noise on video tonight and post...
  2. rustang94

    Witch would you do 331 blown or NA 351

    I would do a DSS engine. And if I was to do a 351 I would want fuel injection..
  3. rustang94

    Witch would you do 331 blown or NA 351

    I'm looking to get a new motor soon ether a 331 with a vortech at 10psi witch would cost almost $9000 the way I want it. Or a NA 351 with custom cam afr heads ect..also what would be involved and cost with a 351 install? Will my T5 bolt to it? Can I use the stock K-member? I would really like to...
  4. rustang94

    Who has and how are Powerdyne Superchargers

    Thats what I was thinking...
  5. rustang94

    Who has and how are Powerdyne Superchargers

    So who has a Powerdyne Supercharger how do you like it and what kind of power are you making? Also what are your supporting mods. Thanks Sorry just did the search and pretty much found out they are crap..
  6. rustang94

    Question about Vortech's power cooler??

    Thanks..Thats what I was afraid of. How much boost do you run?
  7. rustang94

    Question about Vortech's power cooler??

    I don't know if I like the snowperformance..I've Installed it on 3 cars including a friends 97 cobra with a kenne bell and the intake temps didn't impress me 187*. The tuner told me that an 98 cobra with 9psi vortech and the powercooler the intake temps were 89* I don't know how true that is...
  8. rustang94

    Question about Vortech's power cooler??

    I'm looking at Vortech for a blower but I really want an intercooler...If I was to do the 1993 throttle body setup could I use the powercooler from an 93??? Thanks...
  9. rustang94

    Questions about my transmission swap?

    thanks guys I'll look into that stuff...
  10. rustang94

    Questions about my transmission swap?

    as far as the rpm's rising when depressing the clutch, does it go up slightly then fall or does it go up a good amount and hang there? It gos up slightly then falls in the upper rpm then will hang at about 1500 to1700 rpm at idle when I stop for about 10 sec. then will fall to normal..
  11. rustang94

    Questions about my transmission swap?

    I did the AODE to T5 swap everything even the computer. #1 I can start the car with out pushing the clutch pedal. #2 the RPMs go up rather then down between shifts. #3 I've had the clutch pedal position switch that has the two plugs in it unpluged and pluged in and it runs the same ether...
  12. rustang94

    Did AODE to T5 swap need help !!!

    I had a senior master tech at ford install it for me and he ordered the exhaust hanger plate for me and it fixed my problem. It moved it over and since the mount isn't twisted it sits fine now..
  13. rustang94

    hp estimate

    A friend of mine just had his 92 dynoed with the same setup but he had AFR 165s and dyno tuned at 325 whp and 382 wtq
  14. rustang94

    Did AODE to T5 swap need help !!!

    well the shifter housing is in the pass compartment and I cant bolt the rubber dust boot on because its sitting to high
  15. rustang94

    Did AODE to T5 swap need help !!!

    also i'm less then 5/8 of an inch short to the crossmember
  16. rustang94

    Did AODE to T5 swap need help !!!

    I have the bellhousing that says 5.0 on it. I'm am driving it now with no vibrations. when we put it together we look in from the clutch fork cover and everything lined up. even the driveshaft fits like it did in the AODE. I just dont like it sitting as high as it does.????
  17. rustang94

    Did AODE to T5 swap need help !!!

    the part number on the bellhousing was for a 94 mustang. and the tansmission is from D&D and 94-95 mustang cobra is writen on it..
  18. rustang94

    Did AODE to T5 swap need help !!!

    anyone?
  19. rustang94

    Did AODE to T5 swap need help !!!

    ttt
  20. rustang94

    Did AODE to T5 swap need help !!!

    I got the T5 in and ran in to a problem. The transmission mount and crossmember do not line up. I was able to get it in but the mount sits about 1/2 inch to far forward and the transmission sits about a inch to high. I heard the plate between the mount and the transmission ( it also is the...
Top Bottom
Back
Forums
Menu