Search results

  1. forpit2000gt

    Plug and wire question.

    you don't have plug wires on your car. Why do you need new plugs.? How many miles? I recommend NGK, Autolite or Motorcraft. You do not need a plug that costs more than a dollar or two. Autolites are $ 1.97 for a two pack at WalMart. Very easy to install.
  2. forpit2000gt

    Sqeaky Clutch

    could be cable but probably lube under the dash where the pedal pivots. Get under there and move it and see if it is coming from inside?
  3. forpit2000gt

    My Dyno Results

    does the CAI and Plenum act the sme on 05s as it does on pre 05s as far a leaning a little? The Diablo tune may be mosty of the problem. Why didn't they do a couple of pulls? Where I am you got three. Pulls made in 4th gear and up to redline.
  4. forpit2000gt

    4.6 Questions

    I wasn't saying that a T45 will break at 300, it can, and if you put it behind a turbo, it is deff. a time bomb, depending on driving.
  5. forpit2000gt

    Spark plugs, projected vs non-projected

    When you get the plugs will you list the thread depth? I wonder if that has changed, I have a set that was purchased a couple of years ago. Long threads, short threads, they both bottom out at the same point and do not go farther into the head. remember to use anti sieze on the threads.
  6. forpit2000gt

    Ok, need some info about U/D pulleys!

    Most people that have Steada, love Steada, and that is fine. Like many things , if you have something and it works for you, then you recommend it to others. My problem is that some on here think that it's the only way to go. Will a Steada lover please list an experience you had that you saw a...
  7. forpit2000gt

    will a 2002 V6 5sp tranny fit a 2000 GT

    who said a T5 will not work?
  8. forpit2000gt

    Ok, need some info about U/D pulleys!

    Who has had bad experience with Piggy backs and who has had bad experience with Steeda? Heard it from who? Both are equal, but look different. No charging problems either, that came from the 5.0 era.
  9. forpit2000gt

    4.10 gears at idle.

    Hand helt tuner, chip or Speedcal BTW, I think this is the first thread with this question.....
  10. forpit2000gt

    Ok, need some info about U/D pulleys!

    Like many,Not all Parts that fail, The installation is and will continue to be a problem. I see a lot of different problems with cars that people did themselves. If Steeda pulleys had been competitive in price, I may have purchased them. I just get tired of hearing how great Steeda is. They...
  11. forpit2000gt

    Ok, need some info about U/D pulleys!

    yes never had or even saw a problem with piggyback pulley. I have only used and installed March. The belt will line up fine.
  12. forpit2000gt

    H Pipe Install

    I live in an area that we seldom see snow, so no salt. How fast do your pipes rust in areas that do have harsh winters or in caoastal areas? I never saw a major problem with rust, does it take a couple of years, 5, 10?
  13. forpit2000gt

    4.6 Questions

    the blocks sre not the issue, even 2v blocks are going to handel 1200+, the internals are the key. T45 have broken with 300 rwhp, put a turbo on there and see what happens. Need rear end work also.
  14. forpit2000gt

    hood blanket

    I never did this, but see it at car shows often.
  15. forpit2000gt

    Ok, need some info about U/D pulleys!

    I really don't care if the name is Steeda, March, Roush, BBK, or Ford. If it does the same thing, then go by price. There are some things I would buy that have the Steeda name on them. With all the good competetion out there, there are not many good reasons to buy Steeda anything , except for...
  16. forpit2000gt

    4.6 Questions

    if going turbo and you don't want a built auto, better look into a new trans, maybe TKO.
  17. forpit2000gt

    Ok, need some info about U/D pulleys!

    I bought the March pulleys, never a problem. Ther has been nothing to prove a problem with the piggy back styles. Steeda are good , March are good , different styles. You will come a lot closer to 300 with the LTs than wasting money on the plasma booster.
  18. forpit2000gt

    Spark plugs, projected vs non-projected

    neither plug will make contact with the piston in any way unless you have serious problems. Resistor plugs reduce noise back to the computer and electrical system. Example would be without a resistor plug, turn on the radio and a buzz in the speakers that would go up and down with the revs of...
  19. forpit2000gt

    Another gear thread.

    if you have gears installed and they whine, they are not installed correctly. Motive FRPP, PRO50,I haven't heard noise fom any of these. One is not better than the other. I put Motive 4.10 in. never heard noises. Have done FRPP and other no names, no noises. Search some other threads as far as...
  20. forpit2000gt

    Spark plugs, projected vs non-projected

    http://www.spark-plugs.co.uk/pages/technical/ngkjpg.htm right off the NGK web site. .750 thread depth pre 99 .708 thread depth 99+( PI ) not SVO either plug will work, I have not been educated on projected or no projected tips or the term.
Top Bottom
Back
Forums
Menu