Search results

  1. Mustangless

    Cheaters never win...

    :rlaugh: I have been waiting for this since the start. wtg Giants
  2. Mustangless

    lambse, kams... rich?

    think I might have figured out my problem. About a month ago I messed with my battery offset. So I was thinking, maybe I need to change that back. I put it back to what I did have and put my high slope back on 43.5 and low on 49.7 (just a random number) Loaded my tune and drove with no...
  3. Mustangless

    lambse, kams... rich?

    raised my low and high slope but my kams went down :nonono: I was avg. .95, but now I am at .94 kam. My low slope has gone from 43.5 to 45.5 and high from 48 to 48.5 Should I start using my offset now instead of the injector slopes? 45.5 seems high to me for a low slope. This is really...
  4. Mustangless

    lambse, kams... rich?

    I think my o2 is in about the stock location. This is a turbo setup so I don't really know. It looks like it is near stock location after the turbo. Anyways I did more logging today with my new slopes. :rolleyes: It is still rich so I have to go from 43.7484 to 45.5732 I need...
  5. Mustangless

    lambse, kams... rich?

    ^ Alright, you got me thinking about this some more. I am not going to do anything with the battery offset for now. I am going to look back over my log and see if I can't tweak the high/low slope a little. Looking through my avg kam is 0.95, which doesn't seem that far off from 1. 5% if I...
  6. Mustangless

    lambse, kams... rich?

    okay, put in my new tune drove turned it off. Came back 4 hours later and it started right up. The cars temp was only 100* so that is probably not considered a warm start. Did a long log, mostly stop and go traffic. Go to put my info into EA for injector slopes , but I did not datalog the...
  7. Mustangless

    lambse, kams... rich?

    I was thinking I need to lower the high slope, but EA was not saying anything about it. Wes told me to try messing with the battery offset some, so I am going to try that. If that does not work then I will lower the low slope alittle. Also, that table you are talking about is called "Fuel...
  8. Mustangless

    lambse, kams... rich?

    Got the new tune loaded and had my lambse pegged at 18.30 most of the time. Tried raising my high slope from 40 to 42.5 and was still like that. Put my old maf curve back on and it is much better. Now my lambse is 14.4-16.0 and my kams are .91-1.013. EA said to raise my high slope to...
  9. Mustangless

    AODE at Highway Cruise

    according to the u4p0.bin the converter locks 4th at 35.5
  10. Mustangless

    converter needs to be restalled?

    I compared my 0-60 and this was the fastest one I have. I did not compare 0-90 because of the slip, which would make it slower. I was looking over the log again, and at et.80.16528 it goes to 3rd gear, which is way too soon. Then at 82.08804, it goes back to 2nd and the converter unlocks...
  11. Mustangless

    converter needs to be restalled?

    alright, now it seems worse. :nonono: Made a pass and thought 2nd gear was spinning. Stayed in it and it did it in 3rd too. Was not logging, but did on next pass and it did it again. At about 82 seconds into it the rpms start climbing really fast http://www.eectuning.org/node.php?rid=88...
  12. Mustangless

    What kind of oil do you guys run?

    I am using mobile 1 syn. and fl1a, but I think I am going with just some motor craft or castrol next time. I am also thinking about using a cobra filter for clearance issues
  13. Mustangless

    More RWHP ... Describe it !!!

    I think I am in the 300rwhp to 350rwhp 1) What was encountered during the build of the combo ... good & bad This is a DIY turbo setup. Build started off fun, but things never seem to go right when working on cars. Things did not want to fit and it took a while to finish. 2) What was the...
  14. Mustangless

    lambse, kams... rich?

    Well, my my part throttle and idle is about perfect atleast when it is in CL. I have not tried my new injector vs battery offset, so maybe that will help getting PT close to 1 for the kams. Did not check my overflow, and I think I am running 50/50 water antifreeze.
  15. Mustangless

    lambse, kams... rich?

    made a few runs at the track with my new high slope 36.3978 First run I was at 13.3 afr :notnice: Decided just to mess with my curve :nono: I did 10% increase from 10-30. Made another run and it was 12.2-12.6 :shrug: So then I richened it another 5% and went again, but my wide...
  16. Mustangless

    lambse, kams... rich?

    Put my info into ea and it said lower my high slope to 38.545 keep low the same and not change breakpoint. Did that and started the car. According to my lambse I was lean at idle so I changed my high to 48, which is lower. Just did a log after reseting and driving around. Now it is...
  17. Mustangless

    Koni or Tokico

    I have the Illumina correct year on back but on the front I have 87-93. I have read lately that if you get mm caster camber plates you shouldn't need the foxbody ones. Mine seem to work good though.
  18. Mustangless

    Koni or Tokico

    tokico illumina, but if the d-spec is not any more expensive maybe you should get those.
  19. Mustangless

    lambse, kams... rich?

    :nonono: that is so obvious now. I am waiting on Clint (if thats 86gt) to email me back about an injector slope problem. I probably have done something wrong there too. http://eectuning.org/forums/viewtopic.php?t=10384
  20. Mustangless

    lambse, kams... rich?

    Got a log in but, now I have more questions. When I calculate the offset with eec analyzer how do I know what numbers to put calcon or BE in? I don't have binary editor to look at right now, but EA gives me 34 different numbers, and calcon only has 12 spaces. :shrug: I have looked over...
Top Bottom
Back
Forums
Menu