Search results

  1. Blev

    Adding a sub, but HOW????

    I'll check tonight when I get home. I have had zero problems of any nature. I have since added an aftermarket head unit and moved the RCA's to that. Still, no problems with the wires after they were spliced.
  2. Blev

    Ventrua Cnty meets S.D. Cnty?!?!?!

    Nice... We have some folks up in the S.B. area that GTG and we are talking about a GTG at Longboards. There is a thread about it, check it out.
  3. Blev

    Fog Light Modification....

    Not a problem, we're all here to help one another :nice:
  4. Blev

    Fog Light Modification....

    Go Here
  5. Blev

    Adding a sub, but HOW????

    10" Fosgates
  6. Blev

    Adding a sub, but HOW????

    I used the 15 dollar line level converter you're talking about. I have a vert so the amps are located in a different place. That's the only difference. All you need to do is tap into one left and one right output wire. Here is a link to a write up on how to do it. Good Luck :nice:
  7. Blev

    Where is your VIN sticker? Door or door ledge?

    not sure about the sticker, but I know the VIN is located on your dash. If you stand outside of your car and look at the bottom of the window on the driver side, you'll see it.
  8. Blev

    Top 5 Bang for your Bucks 99-04

    :eek: I was under the impression there is only a 15 - 20hp gain. What cams are you talking about? If those numbers are accurate, I know what I'm getting next :nice:
  9. Blev

    Tim from T&J HELP!!!!

    Holy craponmyself, nice friggin numbers!!!!! Thanks for the info man, been sweating this for a couple days now.
  10. Blev

    Header bolts loosening?

    installing headers this weekend. Wouldn't mind knowing the answer to the threadlock question. Subscribing
  11. Blev

    Tim from T&J HELP!!!!

    I have posted a thread in regards to Followers(rocker arms) and valve lash adjusters. I need to know if the ones on the NON-PI heads will work on PI heads. I'm doing my headswap this weekend and didn't get them because I thought they worked. Then someone told me they DON'T work. Can you...
  12. Blev

    PI intake adapter plates

    I'm not sure where you get the 5 - 10 hp from, but I know that the kit will give roughly 25 - 30 hp. I have seen dyno sheets from JUST the intake without the plates that reflect 18 - 22. I'm sure this varies due to other mods. HP/TQ doesn't come cheap, we all know this. We also know every...
  13. Blev

    PI intake adapter plates

    Those figures came from Livenoise motorsports. As to the validity of them, I don't think they had a dyno sheet. The smoother transition of the air from the intake to the heads does net some power without question, as to how much, I can't say.
  14. Blev

    Followers and Lash adjusters, PI, non-PI

    Someone has to know!!! Where is Tim or Jimi when you need them......
  15. Blev

    PI intake adapter plates

    Yes sir....We are gonna start Friday after I get outa work. I'm hoping to have it finished by Sunday early in the day so I can go for a long drive to break everything in. Our local speed shop (MMR) is going to have their Dyno in soon so I should have some numbers to go with it by the end of...
  16. Blev

    PI intake adapter plates

    I was really concerned about the intake leaking and just wasn't worth the headache of tearing it all down again if it did leak. I got the plates and I liked it alot. I can't say what it felt like without the plates because I'm the only one around here I know who did the intake swap. I'll be...
  17. Blev

    Coolant leakage problem need help ASAP.

    If you don't want to try the PI intake mod, you can get a NON-PI intake from SHM with the aluminum cross over. Here is a link to the site, it has a few other options there as well.
  18. Blev

    Followers and Lash adjusters, PI, non-PI

    Anyone :shrug:
  19. Blev

    light bars come on in....

  20. Blev

    Followers and Lash adjusters, PI, non-PI

    Will the followers and lash adjusters from NON-PI heads work on PI heads?
Top Bottom
Back
Forums
Menu