Search results

  1. K

    1999 Gt 0.250a Parasitic Draw From Gem Module/radio

    Try checking your alternator or replacing it before the gem. I had a similar issue on my sons 97 gt. We swap a complete drivetrain/harness/emission stuff over from an 01 cobra that I bought as a parts car. The cobra wasn't running, but after the swap was complete the battery would be dead after...
  2. K

    Electrical Pats Battery Drain

    Take your alternator in and get it tested.
  3. K

    Expired STEEDA BUMPSTEER KIT & X2 BALL JOINTS KIT NEW 94-04 MUSTANG GT

    Greeley, colorado. 80634
  4. K

    Expired STEEDA BUMPSTEER KIT & X2 BALL JOINTS KIT NEW 94-04 MUSTANG GT

    200 shipped?
  5. K

    Cobra tail light swap help

    I know that this is a very old post, but I want to add some information to help out anyone that wants to add gt tailights to a cobra harness. Ill make it short, simple and easy. First off, get a regular gt tailight bulb harnesses and replace your cobra taillight harness with them. Now match up...
  6. K

    351w trickflow r intake

    ttt
  7. K

    351w trickflow r intake

    Trickflow r upper w/ lower for 351w. Does not include bolt kit, and the intake has a 75mm tb opening. I never used this intake, looking to get 490.00. Will ship in two boxes for exact shipping cost. paypal ok.
  8. K

    irs center section, t bird work?

    Update, pulled out a cast iron center section from a 90's supercoupe, v6 supercharged car. The housings are identical, except for it not being aluminum. I also traded out the 28 spline carrier and gears in favor of a 31 spline 3:73 geared unit that was in an explorer that was next to the car.:D...
  9. K

    irs center section, t bird work?

    Hi all, i picked up an irs from an 03 cobra, only problem was that the center section isnt salvagable. Does anyone here know if the centers section from a tbird irs will work in its place. I do realize the cobra is a 31 spline diff, tbird irs parts are a dime a dozen here, I can swap out the 28...
  10. K

    someone school me, cop and coil packs.

    I wish I would have kept it to, but I went through a divorce and some things had to go:mad:. I like how much cleaner the engines with the cop look.
  11. K

    someone school me, cop and coil packs.

    Im not to familiar with the 4.6 engines, but im thinking of picking up a 1997 cobra. Ive had a 2004 mach1, and after looking at the engine on the cobra, it has coil packs, not cop as my old mach did. Now, can a 97 be converted to the newer cop, and if so has anyone done this? Thanks for the help...
  12. K

    someone school me, cop and coil packs.

    Im not to familiar with the 4.6 engines, but im thinking of picking up a 1997 cobra. Ive had a 2004 mach1, and after looking at the engine on the cobra, it has coil packs, not cop as my old mach did. Now, can a 97 be converted to the newer cop, and if so has anyone done this? Thanks for the help...
  13. K

    Do I need a Panhard Bar??

    My coupe did the same thing when I changed the lower control arms. I was stumped as to it cause, it felt as if I was go to lose control of the car, the rear of the car was all over the place. I drove my car to a friends, he walks around it to give it a look over and tells me me rear end sat more...
  14. K

    Any Gen 7 users?

    I just installed a gen7 in my 95 cobra. I havent had the cash to take it in for a tune, but I was able to do the install on my own, just took some time. I opted for the dual sinc dizzy, allows you to run sequential. Updates in software can be downloaded, as well as different engine tunes to get...
  15. K

    I really need some help from u guys n gals. sn95 to fox computer swap

    The problem with the megasquirt was I didnt do the assembly. I wish I had, I just didnt have the time. Maybe it was wired fine, and maybe it was not, ill never know. The guy that made it is doing the changes on it, if it doesnt work, im gonna get another and do it myself. I know, wasting money...
  16. K

    Fox body accessories what all is needed?

    Hey Stopsign32v< I have a 351w no smog or p/s using the sn95 timing cover and water pump. I moved the alt. to the drivers side, used a fox tensioner, and made a bracket the that mounts the tensioner on the pass. side with the coil on the same bracket. I dont have a pic to post, if you want, send...
  17. K

    I really need some help from u guys n gals. sn95 to fox computer swap

    One main reason for the swap, I have a megasquirt that I will be using on the car. It has been set up for the fox harness because we were having issues with the thing when it was wired for the sn95 ( fuel pump and fan were running constant). I didnt do the assembly so im not sure what the...
  18. K

    I really need some help from u guys n gals. sn95 to fox computer swap

    I want to install the a9l proccessor in my 95 cobra. Can anyone help with some info, did a few searches under pih with no luck. I need to know what pins need to be moved, or spliced and any other info. thanks in advance.
  19. K

    05 wheels on a fox...tire question

    Not sure on the coil over question, but i was able to put the 18 polished wheel on a 1986 coupe. I did run into an issue with the strut hitting the wheel, but i changed over to the 99 strut and gained the clearance needed to make it work. On the same car i used the sn95 spindle brake combo with...
  20. K

    aerostar aluminum driveshaft swap!

    Hey guys, cross reference this part number, these are the u joints I use and they are from auto zone. 1-0134 pdq, I just bought two for my next project (10.99). The aerostar shaft is 3" round vs the 3.5" of the motorsport, besides that works fine in my cobra.
Top Bottom
Back
Forums
Menu