Search results

  1. D

    LS1 heads

    The cheap cam blanks have the lobe roughed out and they just need to be finished ground. A round blank would be needed and that requires much more grinding time therefore the higher cost. They do have carburated manifolds for LS1's They work just fine with a carb. I also forgot another major...
  2. D

    LS1 heads

    A sheet metal intake would also need to be made. With all of that work and cost I just did not want to put the effort into something that may not run or run right. I would like to know if anyone ever dose it.
  3. D

    LS1 heads

    I attempted this swap. I bought a used set of heads, intake and cam. I mocked everything up on a 351W block. There are two major problems and multiple minor issues. First is that the Ford Block has the Cylinders offset on the passenger side and the Chevy is on the drivers side. This...
  4. D

    FL Headers for a Cable Clutch T5

    These are a set of modified Headman painted full length headers. I also tucked the headers up closer to the floor. They fit 67,68 mustang with 289/302 with a cable clutch T5. Must use 68 motor mounts (engine sits lower). I have pictures. Please pm me with your email address for pics. They...
  5. D

    WTB: turn signal hood

    I have a no rust original but I am in PA.
  6. D

    68 Mustang 8 inch rear 2.79 open

    One used 8 inch rear from a 59,000 mile 68 Mustang. 2.79 open. No backing plates or brakes. 5 lug axles included. $150. Located in Muncy, Pa 17756. Pm me with your email address for pics.
  7. D

    Power Steering Conversion 68 mustang

    One complete power steering conversion less hoses. Control valve ball socket is damaged. Came off of a 68, 59,000 original mileage car. $150. Located in Muncy , PA 17756. PM me with your email address for pics.
  8. D

    Edelbrock Performer RPM Heads & Lunati Rockers

    One set of USED SBF Edelbrock Performer RPM Heads & Lunati 1.6 Roller Rockers. Fully Machined, New 2.02, 1.6 Valves. Bowls blended, Ready to bolt on. $850 + shipping. PM me for more info.
  9. D

    Aftermarket Hood Question

    Does any one know what kind of hood that was on the cover car of Hot Rod (& Car Craft) with in the last year. The car was a bright orange 67 GTA with silver stripes. The hood has two individual scoops on the leading edge and transition to a raised cowl shape at the rear. There is no mention...
  10. D

    67 Turn signal question

    Thanks guys for the great info.
  11. D

    67 Turn signal question

    What year did self canceling turn signals make their debut. I have a 67 that does not have them and I don't know if they were not available or they are just not working. Thanks
  12. D

    68/69 Styled steel wheels 15X7 & 15X8

    The center hole is 2 3/4" (2.750). They are not like magnum 500's.
  13. D

    68/69 Styled steel wheels 15X7 & 15X8

    Price dropped to $550 For the wheels & $675 for wheels & tires.
  14. D

    G-Force or Tremec TKO600?

    Go with the G-Force. I have toured the G-Force facility and I have talked to the owner and you will be safe a that power level even with slicks. The quality of their products are top notch. I will be buying a kit for my T-5 in the next few months.
  15. D

    One Dim Headlight

    Hi everyone, I have a electrical problem. I think it's my headlight switch. My drivers side headlight is very dim. The passenger side is fine. Also when I turn on my headlights the domelight will not turn off and my turn signals are screwed up.
  16. D

    28/9.0/15 M/T ET Drag Slicks w/wheels

    One pair of Mickey Thompson ET Drag slicks 28" dia. X 9.0" wide x 15" on Aluminum 15 X 7 Ford Ranger wheels. 4 1/2" BC, Approx 1/16" left on slicks. Wheels are in fair condition. $75 Located in central PA. PM me for pics
  17. D

    68/69 Styled steel wheels 15X7 & 15X8

    I am old school when it comes to wheels, so I would not be interested in the 454s'. I am looking for a used supercharger or aluminum heads. Thanks for the offer, Doogie
  18. D

    68/69 Styled steel wheels 15X7 & 15X8

    One set of 68/69 Chrome Styled Steel wheels (2) 15X7 & (2) 15X8 with plain center caps. They have like new tires on them right now but I will sell them without the tires also. Tires are 215/65/15 on the 15X7s' and Brand new 255/60/15 on the 15X8s' Lugs included. These wheels have 60 miles on...
  19. D

    12volt switched power?

    I can't seem to find a 12Volt switched power lead to hook up my MSD inginition wire. All the leads either cut off voltage while cranking or drop to 8 volts. Is there a resistor or bypass that is reducing the power? I guess I will have to run a wire to the battery and put a on/off toggle in...
  20. D

    Eaton M90 Supercharger

    Check out this website. toohighpsi.com This guy put 2 M90's on a 351w Tbird and went 10's in the 1/4. I have been think of using a Cobra or Lightning supercharger the same way you have discussed. Good luck and keep us posted.
Top Bottom
Back
Forums
Menu