Search results

  1. Jason2000GT

    P0301 Mil Code???

    I replaced the #1 cylinder plug with a brand new Autolite 764 last night. I also visually inspected the coil-on-plug adapter and I blew out any debri with some compressed air. Put everything back together and started the car. It idled good for about 8 minutes then I shut it off and called it...
  2. Jason2000GT

    HELP! My car isn't making any power, poor idle.

    I am having some of the same problems with my 00GT. I changed the plugs to Autolite 764s last monday and it has ran like crap since last wednesday night. This morning it was pretty cold out, 38-40 degrees and the car ran like crap this morning on the way to work. It had really bad hesitation...
  3. Jason2000GT

    P0301 Mil Code???

    Yeah, i am going to change out my old stock one when i get home tonight. Hopefully, that will clear up the problem. I will repost what I find out. Thanks!!!
  4. Jason2000GT

    magnaflow true x crossover pipe

    Just get the complete pipe. You will get 2.5" tubing and two high flow cats. I just installed mine last thursday night. Very easy install and noticeable gains....
  5. Jason2000GT

    P0301 Mil Code???

    Here is my stituation: I installed new Autolite 764 plugs on 1/19. The car ran fine on 1/20 and then the evening on 1/21, I noticed a very rough idle and it felt like the car was stumbling when taking off normaly in 1st gear until like 2000 rpms. After driving it a few more times, I...
  6. Jason2000GT

    Slp Catted X Pipe

    Well, I ended up getting a Magnaflow X pipe off a guy on the corral for pretty cheap. It should be here soon. Saved over $100 by getting the Magnaflow over the SLP.
  7. Jason2000GT

    Slp Catted X Pipe

    Spreadman, I like your combo and you made some good videos for comparing sound. I wish I could find someone with Packs and the SLP xpipe....
  8. Jason2000GT

    Chassis stiffening questions...

    1. don't know about the Steeda subs. They did come out witha full length kit that looks nice. 2. make sure you have the person welding them in check to make sure the carpet isn't burning. my installer was always checking. 3. subs shouldn't be visible from walking up to the car. they are...
  9. Jason2000GT

    Slp Catted X Pipe

    bump
  10. Jason2000GT

    Chassis stiffening questions...

    I went with the Kenny Brown Super Subs. Only $99 bucks and I was able to get them welded up for $60. Very good mod for the money. You will be able to tell a huge difference in the stiffness of the chasis. They seemed to quite down my car as far as shake rattle and rolls are concerned....
  11. Jason2000GT

    Slp Catted X Pipe

    Pics would be great. Sound clips would be even better:) Thanks!
  12. Jason2000GT

    Slp Catted X Pipe

    I think I might have to go with the SLP xpipe. Stallion98GT - did you purchase the race pipes from SLP? I would think you would be able to find SS pipes cheaper that would fit...i might be wrong though.... Thanks.
  13. Jason2000GT

    Slp Catted X Pipe

    bump
  14. Jason2000GT

    Borla vs Magnapack

    Do you have any sounds clips or movies? I am trying to figure out what Xpipe to order to go with my PACKS....
  15. Jason2000GT

    Slp Catted X Pipe

    Do you have any sound clips by chance or PICS?
  16. Jason2000GT

    Slp Catted X Pipe

    I am interested in buying this X pipe to match up with my MangaPack cat back. Is anyone using this pipe yet? I like the idea of being able to take the cats out and the fact that you don't have to purchase another x pipe if I go with Long Tubes in the future. What is the best Catted X pipe...
  17. Jason2000GT

    Kenny Brown subframe connectors

    I love mine. Good mod for the price....
  18. Jason2000GT

    Order myself some nice Xmas gifts

    Hey fellow Arizonian! I am tossed between ordering 4.10s or SLP catted Xpipe.
  19. Jason2000GT

    Engine Tower Strut or Sub-Frame Connectors

    I did Steeda Strut tower brace first. Didn't make THAT much of a difference. Then, I got my Kenny Brown SuperSubs installed about a month ago. Big difference. Go with subs first, you won't regret it. They make the car feel much more solid!
  20. Jason2000GT

    Looking for a good set of full legnth subframe connectors for a good price

    My car was put on a 4pt lift then lowered onto jackstands to allow the suspension to compress to normal. I had it done at a performacne shop here in AZ. Only $60 for the install.
Top Bottom
Back
Forums
Menu