Search results

  1. DougNuts

    Should my car die if the MAF is unplugged?

    My car ran without it plugged in. I drove it probably 20 miles that way, it just didn't run well.
  2. DougNuts

    New wheels are in! (PICS 56K Warning!)

    Those are very very nice. I want wheels very similar to that for my car. I don't dig the bolts very much, but that's just me, some people like them. I can't wait to see them on your car!!!
  3. DougNuts

    347 Finally Runs!!!

    I just have one thing to say. Get that alignment and :Track: :D
  4. DougNuts

    Replacing front suspension, what to get?

    If I've said it once, I've said it a thousand times.... Maximum Motorsports or nothing at all. I'm getting a house this year, and then after that it's the full $4000 kit from MM!! You'll save tons of weight, have good race proven geometry and it will be tough as nails. Do it right the...
  5. DougNuts

    CRIBS- Stangnet Edition

    stprorolla49, Is that a bottle of lotion by your little bro's bed?:rlaugh:
  6. DougNuts

    347 Finally Runs!!!

    I know that feeling. Take a couple days off and come back to it, the hard stuff is over. Congratulations!! :flag:
  7. DougNuts

    Pics of my freinds car from last weekend at gandys/bmp, **56k needs Vortech!!!***

    Css
  8. DougNuts

    Oil in upper/lower intake on a supercharged car....pcv?

    IIRC, When you're under boost, the PCV valve should be closed due to the pressure coming from the intake side. But, you will also have increased blow-by due to the boost. When you come out of boost and the intake sees vacuum, the PCV valve should partly open and will then vent the now...
  9. DougNuts

    Oil separator review...

    Well, yeah :rlaugh: I get smoke out the tailpipe when I hit VTEC and I'm trying to get that to go away.
  10. DougNuts

    Oil separator review...

    Well, I'm not happy with my separator currently. I have more oil in the line leading to the separator than I do in the unit. I also have an oil smell coming from somewhere and I'm not sure where. At this time, I recommend sticking to the smaller separator like Rio used, don't mess with the...
  11. DougNuts

    Oil separator review...

    I just put one on my Civic yesterday. I used the large one available at home depot, not the small one like Rio used. Mine did come with a warning about synthetic oil, but it appears that my filter is different from Rios. I currently have about a 50% synthetic mixture in it, so after my 400...
  12. DougNuts

    Little preview of the new set-up...

    Looking nice, real nice!
  13. DougNuts

    Where to get new Accel injectors for N/A 2.3

    N/M fuggitaboutit. I'm going to just send them out to be cleaned and blueprinted.:nice:
  14. DougNuts

    Where to get new Accel injectors for N/A 2.3

    Does anyone know where I can buy new Accel 14# high impedance injectors for a 2.3? In my search, someone had said you can buy a pack of 4...where?
  15. DougNuts

    got my suspension in today...WOW!

    They sell drag race stuff. http://www.maximummotorsports.com/index.asp
  16. DougNuts

    got my suspension in today...WOW!

    It was worth the money wasn't it. :) I remember when i was trying to talk you into that set-up a couple months ago.
  17. DougNuts

    Water in trunk (spare tire compartment)

    Check for leaking around the gas filler neck area on the passenger side. That's where mine leaked for a while before I finally traced it down using a hose. That area of the trunk will rust, and mine has. I just painted it with some POR-15 a couple of months ago. I created a post about this...
  18. DougNuts

    Help me decide on a truck!

    I'm also into rangers and used to have one myself. My dad still drives it. We've had two Ford's with the Vulcan 3.0 and both of them have gone over 170K miles with no problems and what I call not so great maintenance. I'd get a 3.0 ranger over the 4cyl, but that's just my opinion, not based...
  19. DougNuts

    Some Pictures form a car show last weekend.

    I work in the automotive industry so we get a couple weekly magazines that keep me up to date.
  20. DougNuts

    May switch intakes-Victor, RPM II or Holley?

    Good choice. I'm leaning towards the Victor on my 357, but my compression will be a little higher and I plan on reving it to about 6800.
Top Bottom
Back
Forums
Menu