Search results

  1. MaxxMundo

    help me figure this out

    I'm sorry. I thought you were asking about the H you picked up. Do you have any more pictures of your mid-pipe? It's a little hard to tell from that angle.
  2. MaxxMundo

    help me figure this out

    Looks like you picked up an '04 H-pipe. They changed the design of the cats and moved the O2 bungs for emissions laws (I think). If you ever want to use it, you will just need to pick up some O2 extenders.
  3. MaxxMundo

    I want some Drag Racing, but lowering springs...

    If you want a more even stance, front to back, you can also cut the dead coil off of the rear springs and it will even it out. I think that you will still have the raked look if you remove just the isolators, but give the isolators a shot first. Pics look good, though.
  4. MaxxMundo

    floor mats

    Try www.50resto.com. They have a pretty good selection of floor mats.
  5. MaxxMundo

    Think I can use Sea Foam @ 50,000 miles?

    Yeah, that's the hose it should go into. It should run to your passenger side valve cover. You need to have someone keep the rpm's up while you're feeding the seafoam into the engine. Never heard of anyone using the hose in the red circle, though.
  6. MaxxMundo

    Magnaflow 93335 x pipe

    Go for it. I just put that x-pipe on my car about a month ago and it sounds great with my magnapacks. O2 sensors went in without any problems and I haven't thrown any codes since the install. If you haven't heard them, there's some good soundclips on Spreadman's site...
  7. MaxxMundo

    Releasing Fuel pressure

    I think there's valve on the passenger side fuel rail that you can you can use to release the fuel pressure. I might be wrong, though.
  8. MaxxMundo

    Springs!!!????

    Mity's pretty much dead on with what you "should" get for a car your age. C/C plates aren't really needed unless you drop it more that 1.5 in., but will definately help with alignment. You may want to consider FRPP "G" springs for your car. They're specially made for 'verts, but usually cost...
  9. MaxxMundo

    North Alabama Vortech

    What about Modular Powerhouse in Atlanta (Marietta)? I've haven't had any work done from them, but I've heard Tim is the man to talk to if you need your blower tuned. If you'd drive to Memphis, Atlanta shouldn't be too much of a stretch. www.modularpowerhouse.com
  10. MaxxMundo

    03 x pipe work for an 04

    Yes. An 03 will work for an 04. They're usually advertised this way because the 04's require O2 extensions to make the O2 sensors reach the holes in the pipe.
  11. MaxxMundo

    What Midpipe would you buy.....

    BINGO! I just put mine on about a week ago and the sound is :drool: .
  12. MaxxMundo

    Ford C Springs "Need your experience"

    Congrats. I think you'll like them. :nice: Give them a few weeks after the install to let them settle, then give us the final judgement and pics.
  13. MaxxMundo

    Ford C Springs "Need your experience"

    I've had mine for about a year now and I don't have any complaints. I like the look and the ride. The install was much easier than I expected. I don't need c/c plates and I'm still on the same stock shocks/struts that came on the car. It dropped the front about 1 1/4 inches and the back about 1...
  14. MaxxMundo

    Magnaflow Catted-X....

    Yeah, the '04's cats were different so the location of the O2 sensors were changed. He needs a set of these: Couldn't find them on Partshopper, though. On Mustangtuning.com they are discontinued. Don't really know anywhere else to look other than e-bay. Enjoy that x-pipe. I just put one...
  15. MaxxMundo

    Exhaust Install

    Go for it. I just installed my x-pipe on Tuesday and I'm glad I saved the money. Definately shoot them with some good penetrating oil and let it soak. Like everyone else says, the passenger side manifold bolts are a pain, especially the one toward the inside of the car. I used a 10 in...
  16. MaxxMundo

    Magnaflow or Magnapack?

    Honestly, I wouldn't worry about the tru-x weld in. Main reason is that you're still going to have the stock cats and pipes. With the Magnaflow catted X, you're going from 4 restrictive cats to 2 high flow cats and you're going to get mandrel bent 2 1/2 inch pipes as opposed to the stock crimped...
  17. MaxxMundo

    Magnaflow or Magnapack?

    Good. I need something to get that lazy ****** out of bed every morning. :D
  18. MaxxMundo

    Magnaflow or Magnapack?

    I definately think you should go with the 'Packs. I couldn't get the grin off of my face for weeks after I installed mine. Don't worry about waking up the neighbors. My driveway is pretty close to my bedroom, and my wife doesn't even hear me leave early in the morning. And you'll feel pretty...
  19. MaxxMundo

    After putting in smoked headlights + silverstars

    Yeah, that settles it. Going to get those fogs. They're sweet. :nice: Thanks for the pic.
  20. MaxxMundo

    Found a leak in my intake manifold!

    :banana: Good. That gives me a full two years to crack it. :D
Top Bottom
Back
Forums
Menu