Search results

  1. Methodical

    problems problems problems

    KAM is keep alive memory - basically keeps the computer settings (parameters) established for all driving conditions to refer back to. To reset it just unplug the battery for about 20 minutes or so. When you restart the car it my not idle right for awhile because it is establishing new running...
  2. Methodical

    any money wizards out there?

    Pokageek beat me to it. Look into a reverse mortgage. I don't know all the ins and outs of them but it could buy some time. Do a google and get tons of info on it.
  3. Methodical

    here we go again

    The picture is not clear of the metal object. How many miles on the motor? Did it just start or was it there when you installed the motor? The ticking kinda sounds like spark to ground (bad wire) but I see that's what you're looking for, maybe loose rocker or rocker barely hitting VCs. Maybe...
  4. Methodical

    Found oil puddled on timing cover (pics)

    Probably the underside of the water pump - assuming your leak is on that side. Had same problem. Went back to thin layer of RTV on gasket and no more leaks.
  5. Methodical

    Car won't start: electrical

    Did the new TFI fix your problem?
  6. Methodical

    car wont start

    What was the problem/fix?
  7. Methodical

    HELP!!! Stang won't start.

    What was the problem/fix?
  8. Methodical

    Car won't start with SPOUT plugged in..bad computer???

    Update: Did some testing last night but will do more. I tested for power but noticed that my batter was low (11.5v) so I had to recharge and will retest for proper voltage tonight or at least this weekend. But below are results test results. Tell me what you guys think. Oh, I tested a new...
  9. Methodical

    Hissin need your help

    Update: Did some testing last night but will do more. I tested for power but noticed that my batter was low (11.5v) so I had to recharge and will retest for proper voltage tonight or at least this weekend. But below are results test results. Tell me what you guys think. Initial Standard...
  10. Methodical

    Hissin need your help

    Cool. The journey begins tonight.
  11. Methodical

    Need help trying to fix my air conditioning, details and pics inside!

    Sounds like the valve seal is bad. I'd replace it with a Ford one only. Don't use the local part store ones they don't fit. Then you need to evacuate the system to see if it holds pressure. Then recharge it. You can purchase the hoses from the local part store for cheap. You can get a Vac...
  12. Methodical

    Hissin need your help

    Hey Hissin, I read and reread this statement and started thinking - Uhmmm. Then I began looking at the wiring diagram and PCM pinouts and started seeing VPWR. I said Hissin maybe on to something. I do have the MSD box power cable connected directly to the battery and that's why it starts with...
  13. Methodical

    How many grounds (straps) do our cars have

    So you guys only had 1 ground wire. Another person on Corral stated that they had 3 ground wires; tranny bellhousing, motor mount and back of cylinder head. I recall having one coming off my hood to the body but I replaced the hood. Were you guys having any starting issues?
  14. Methodical

    How many grounds (straps) do our cars have

    And where are they located? I ask this because I'm having starting issues and want to recheck and clean all ground connections. When I rebuilt the car, I only remember connecting just the one to the motor mount. Thanks
  15. Methodical

    Won't start- tried just about everything

    Jrichker, can you post up the Wells tech bulleting. I have the same no start issue with the stock ignition system, excpet mine will start with the MSD ignition connected.:nice: Thanks
  16. Methodical

    Hissin need your help

    Hissin I apologize for the late reply so much going on on the home front. I wish I could clone myself and send the clone to work so that I could get all the stuff done at home, including the 'Stang. Thanks for the info.
  17. Methodical

    Hissin need your help

    Hissin do you have detailed information about how the ignition system work from the moment you put the key in and turn to start the car. I need detailed information so that I can trace my no start problem. YOu may recall that my car won't start with the spout connected and using the stock...
  18. Methodical

    Scan tool unable to connect to computer

    Did you mean the front of the intake? The back is usually where folks put the stock one after installing an aftermarket gauge.