Search results

  1. Methodical

    Largest Rear Nitto Drag Radials That Fit?

    What are the differences? What is it that you like more about the MTs over the Nittos?
  2. Methodical

    PCV Removal

    Thanks for the info. When you get them can you post the inside dimensions of the VCs?
  3. Methodical

    Overflow spout on fluidyne rad need pics

    That's strange mine came with the connector on the radiator. I did not have to install anything other than the rubber hose to the overflow tank
  4. Methodical

    PCV Removal

    That sounds better to me and plus it keeps the stock system in place. Are you running stud mounted RRs? I want to run those VCs (the Cobra one's actually) just can't get any dimensions on the VCs so that I can make sure they clear my RRs and EGR valve. So I'm subscribing. Oh can you post...
  5. Methodical

    Largest Rear Nitto Drag Radials That Fit?

    The Nitto 315/35-17s are 12.125" wide. I have mine on 17x11 wheels
  6. Methodical

    lambse, kams... rich?

    OK ya'll here's my .02. When I began TwEECing, I followed the logic below for tuning the MAF. I remember reading on the tuning sites that to either tune the injector slopes to the MAF or the MAF to the injector slopes but not both at the same time, or else, like a dog, you'll be chasing your...
  7. Methodical

    First ride with new engine and 42lb inj + ?

    I'm having the opposite happen to me. With the stock igntion system my car won't start with the spout connected but will start with the spout not connected (i.e. removing computer from equation). Doing some diagnostics but it seems to be leaning towards a bad computer. I found a thread where...
  8. Methodical

    Update Finally! V6 to Cobra Conversion Progress (lots of pics)

    What parts will you be selling from the Cobra?
  9. Methodical

    Messed-up DFR500 wheels

    You did the work all by hand or did you use a buffer? Also, how did you put the clear coat on? Nice job.:nice: Also, about the wifey thing: are you a MAN or a mouse?:D
  10. Methodical

    Removing Airbags - Need Directions

    Instead of removing it and causing issues, just unplug the harness and leave the airbag in place. So visually it's no issue with local authority. Then some time in the future you can just hook it back up. They have an airbag simulator that would/should keep the airbag light off and the buzzer...
  11. Methodical

    Removing Airbags - Need Directions

    Why are you wanting to remove the airbag? - curious.
  12. Methodical

    Messed-up DFR500 wheels

    Why not call the manufacturer and see what they suggest? They may have a product or steps to fix it.
  13. Methodical

    Help-- Ebrake handle problem

    FYI: Go to the dealer and get the Ebrake cable. Don't order from Summit and other places like that because they are not the correct cable for our cars. So save yourself some trouble if you have not gotten the cable yet. Also, I have step by step instructions at home. I will post when I...
  14. Methodical

    EGR block off plate?

    Just some info for you if needed: http://www.allfordmustangs.com/techarticles/Smog2.pdf Note: if you have AFR heads the bolt size is 5/8-11. Also, I used a 5/8" npt nut (brass cap) from lowes for exhaust header with high temp silicone.
  15. Methodical

    for those of you with lowered stangs...

    Plus with the MM you can grease the bushings
  16. Methodical

    No spark, what the ...

    I know your pain. I have a weird issue with the stock ignition. The car won't start with the pill out but will start with the pill in. A couple of peeps said that's an indication of a bad computer. I haven't had time to do any diagnostics yet. But what's really weird is the car will start...
  17. Methodical

    Which Power Steering Pump

    Turbo, what problems were you having that required a new power steering pump? Also, which pump did you go with and do you still have it on the car? Thanks
  18. Methodical

    Greasing a cam

    Ultra Slick user here
  19. Methodical

    valve covers for afr 165 heads

    That may be the reason why the stock VCs work. From what I understand the stud mounted RRs won't clear the stock 94-95 VCs. But if you have the stock pedestal RRs on the 165s then you'd probably be ok based on the responses here. I may try and install my stock cobra VC with my stud mounted...
  20. Methodical

    Cooling system overhaul

    Yeah low speed about *208 and high speed comes on at *226 - way to hot. The flowkooler water pump requires 2 gaskets to clear the cover (i.e. keep from rubbing the cover) - at least mine did. I have a basically brand new flowkooler WP if interested let me know. I ended up using a stewart wp.
Top Bottom
Back
Forums
Menu