Search results

  1. 0

    what are the best springs give even drop all around ???

    Ride is Awsome Not choppy or anything! And that's on stock shocks which I'm going to replace sometime Next winter. I goet TON's of looks witht them!
  2. 0

    what are the best springs give even drop all around ???

    H&R super sports 2" drop! Why only 1" still looks like a 4X4
  3. 0

    Your Opinions, C&L Plenum w/ 1'' spacer

    Yep No Need for it! Take it off!
  4. 0

    Aluminum Driveshaft

    where are you getting it from Can you post a link? Thanks :)
  5. 0

    alignment without caster camber plates?

    Nope I have H&R super sports and THEY DIDN'T need them at all! Goodluck
  6. 0

    Whats my HP?

    I sure as hell did! I mean the whole intake system I have now kicks ASS! I can fell REAL rwhp and tourqe! And I don't care what thoses other guys say it's worth it! :)
  7. 0

    Pro 5.0 Install

    easy install on any shifter 10-min TOPS and if it takes longer your doing something wrong! HAVE Funn **Tip to adjust the slack push the shifter all the way into 1st gear and adjust the bolts and put a Dime between the shifter and the bolt then pull the dime out and go 1/4 turn and lock it...
  8. 0

    Accufab plenum % TB problems

    I know the problem I have the same problem with mine!! it's the tps throttle postion switch Ok if you take the switch back off the T/B you will see it moving becuse the computer is tring to compensate for the new stuff soo much that the switch is going nuts! If you take it off or unplug it...
  9. 0

    Promised Lowered Pics

    MUST HAVE CHIN SPOILER!!
  10. 0

    SteedaTri-ax noise

    ya It was a snap! I have no idea why they tell you not to it fits FINE! Good luck~
  11. 0

    Lowering ??

    Ya you need a stiffer spring I have H&R's with stock shocks adn nothing else and the ride is AWSOME! Here's what it looks like,BTW I didn get a Alinement but they didn't need C.C.Plates so that was cool!
  12. 0

    Whats my HP?

    no Maybe more like 289hp but throw a C&L 85mmMAF and C&L Inlet tube and you should be well over 300hp @ the flywheel I have them and They are AWSOME !!
  13. 0

    installing x-pipe need help

    Yikes that sucks! That's why I used No Power tools Cus I did that once and I was pissed! Sorry ,Goodluck :(
  14. 0

    SteedaTri-ax noise

    Ya I put Gasket sealer on the bolts so they woun't back out! I also put gasket selaer around the WHOLE shifter plate and tranny. I'm sure it's going to be fine! As soon as I put the rubber on..HA HA HA it was fine!
  15. 0

    Need opinions quick: Bullitt side scoops or not?? (free to me)

    Yep get them!
  16. 0

    SteedaTri-ax noise

    Thanks But I got it REAL tight and it's fine And there is NO SLOP~ Maybe 1/4" was not the righ size but around there.. It's all I have in the shop to work with and I think it will be FINE! Thanks
  17. 0

    Wet shot inlet pipe ?

    C&L I got's one for ya!
  18. 0

    PLEASE HELP my stang making crazy noise

    I have heard nothing but bad stuff about thoses clutches! Maybe the throw out going? Another guy posted the same thing last week where the t/o went out and the clutch broke into 3 parts and he had only 2-3 weeks in the car?? So I would look back some and see if that guy's post it what you have?
  19. 0

    upper or lower control arms what do they do and do i need them

    Well I got a set of D&D Upper and Lower and the end result was Tighter rear end and NO wheel hop! I know my 60' will drop! as for fixed or adj. I say fixed I read that most people who have adj. don't even know what the hell to do with them? Not joking I mean it's better then stock but I'm not...
  20. 0

    SteedaTri-ax noise

    Ok I got it fixed! I took a 1/4" peice of rubber and slapped it between the shifter and the handle and then a couple of longer bolts and Wala! Worked like a school girl on prom night!
Top Bottom
Back
Forums
Menu