Search results

  1. ram360

    ? For anyone that knows aftermarket alarms

    For the life of me I cannot figure this out. I wired my entire alarm in over the winter works great w/ the exception of the trunk trigger wire. Instructions tell me I need a neg trigger. The only thing I can find on the car for a trunk trigger is the black/pink wire...I looked at some diagrams...
  2. ram360

    Aftermarket Water Temp and Oil Pressure Sending Units

    looks good! As for me.... I went to AZ and Advanced today.... neither had the t-fittings...Now I know they used to b/c I've done a similar thing on both of my fox stangs a few years ago and I bought them there. I have no idea why they don't carry them anymore around here. I'll have to run to...
  3. ram360

    5 lug conversion pic

    take a good look at them....they will be sitting back in my garage if you don't pay me for them by the end of the week.
  4. ram360

    Aftermarket Water Temp and Oil Pressure Sending Units

    didn't get a chance to look for it today but I should be able to stop in tomorrow and if they have something I'll get a p# and post it up.
  5. ram360

    Aftermarket Water Temp and Oil Pressure Sending Units

    so you guys the picked up a replacement t-stat housing / water neck from autozone and it's a steel one? If that's the case I'll pick one up today.
  6. ram360

    Aftermarket Water Temp and Oil Pressure Sending Units

    you mean you put another sender in the neck near the t stat? :shrug:
  7. ram360

    Aftermarket Water Temp and Oil Pressure Sending Units

    funny..... I want to do this too. I did a search but can't locate the thread your referring to hissin.
  8. ram360

    with the deal with the inside pull handle?

    mine is the same way, I just live with it.
  9. ram360

    95 GT brake problem

    could be a sticking caliper, you could also try replacing the slides and regreasing them
  10. ram360

    Laptop Mount

    the ebay description was a pain in the ass to read...is it removable or do you need to unbolt the base to get it out? If it were me I wouldn't want it in there all the time. Looks like it works pretty good and apparently they sell enough of them.
  11. ram360

    Wiring Help! Windshield Wiper Related

    I managed to get it sorted out. Now they work :nice:
  12. ram360

    94 Gt Wiper Control Module Location

    Nevermind, I found it. It's near the fuse box under the dash.
  13. ram360

    94 Gt Wiper Control Module Location

    Anyone know where it is? I'm sure it's on the drivers side under the dash but where? Near the fuse box?
  14. ram360

    Laptop Mount

    the only one I've ever seen in a mustang was attached to the front seat bolt of the passenger seat.
  15. ram360

    351 sn95 with shorty headers and cats? Suggestions?

    I have Mac shorty's on my 351w swap 94 gt so they'll work...not sure if I have a p# anywhere though
  16. ram360

    Wiring Help! Windshield Wiper Related

    ok so had some time today and I have voltage at both sides of the fuse w/ the key in the run position but they still don't work. The switch is plugged in I followed the wires from the switch but it just runs into the main harness and that's where I loose it. Looking at the diagrams I have a...
  17. ram360

    Wiring Help! Windshield Wiper Related

    No I haven't, How do I go about that? thanks!
  18. ram360

    Wiring Help! Windshield Wiper Related

    The wipers on my car stopped working all together. I though it was the fuse.... Checked that (I think it's in position 4 in the kick panel fuse box 30a), and it was not blown. Thought it was the multifunction switch. Replaced it w/ a spare I had lying around and again nothing. I don't think...
  19. ram360

    Help finding this wire

    thanks hissin, it already has another wire coming from the alarm that taps into purple/yellow wire from the trunk popper button (glove box). I'd rather just find a negative trigger if at all possible, but I really don't see a wire that goes to ground when the trunk opens (negative trigger) I...