Search results

  1. GTWayne

    Rod Bearings now ...wtf

    Rob bearing help Try posting your question over on Hardcore50 Mustang Racers forum, The Small Block Ford Group. There's some long time engine builders that hang out there and will answer all your questions. Wayne
  2. GTWayne

    Air Bag light flashing???

    Air bag light flsshing Turns out there's a separate control unit for the ABS/Air bag computer that had to be reset. Wayne
  3. GTWayne

    Air Bag light flashing???

    :shrug: After putting the new engine in and firing it up (ran smooth and quiet), the air bag light is flashing. Ran a code scan and system test passes, no codes. Any ideas? :shrug: Wayne
  4. GTWayne

    Which head gaskets to get?

    Head gaskets For boosted applications and if money isn't a concern, you can't get better than Cometics. Wayne
  5. GTWayne

    Weld wheels to fit over 13" Brakes

    Weld Prostars on 13" brakes Silver88Gt, Was that with the regular ProStars or the XPs? I'm also assuming that's 7/16 up front and 5/16 spacer on the rear? What did you do about studs? Did you have to install longer ones and what length? What about lug nuts, the ones supplied by Weld...
  6. GTWayne

    post SN 95's with Weld prostars

    Welds Last5.0, I'm assuming you're talking about what it takes to fit over stock GT brakes and not Cobra/Bullitt 13"?? Wayne
  7. GTWayne

    Weld wheels to fit over 13" Brakes

    Anyone know if ProStars or Draglites (normal or Xp) in 15x3.5 with 1.75" BS will fit over Bullitt/Cobra 13" brakes? Wayne
  8. GTWayne

    Dimensions of the Stock Oil Pan???

    Anyone know the dimension (L x W x H) of the stock oil pan. I'm looking at replacing mine to clear a main girdle but am concerned that since my car is lowered some of the aftermarket 7 qt pans may be too tall or extend to low. Wayne
  9. GTWayne

    Breather System Rig Up...Part DEUX

    Breather rig up RC, That's a great post man, thanks. Since I'm such a visual learner I now understand what needs to be done and how. Will do this after I get the SB installed. Wayne
  10. GTWayne

    New Guages , but want to keep old also

    Installing new gauges and keeping the stock ones http://groups.msn.com/Waynes94GT/mustang.msnw?Page=2 Go to the link above and you can see how I used a brass T to install both the stock and AM temp sensors. I did a similar setup for my oil temp senders but had to use an extender and a 45...
  11. GTWayne

    Rigged up a breather system.

    1 way chk valve Vibe, Where did you get the oneway check valve and is there mfg name/part number? Thanks, I'm going to do that set up. The pics are great. Now I understand what needs to be done. Bling, Thanks for following up. Wayne
  12. GTWayne

    Rigged up a breather system.

    Subscribing Vibe, Joe, I really need to know how this works because I've been following all these too for the same reasons. As I told RC, I thought I understood Bling's instructions but the more I read the posts the more confused I got. I never gave a thought to the stock NA breather...
  13. GTWayne

    Would I be stupid if I didn't do this?

    For many reasons but ones like FFW and NMRA class requirements, small displacement suits my intentions for now so I went with the stronger set up 306 (more forged parts). Later when all out racing is the only thing the car will do, I'll opt for displacement. Thanks for all the replies. By...
  14. GTWayne

    Would I be stupid if I didn't do this?

    Have a chance to get a CHP 347 for the same price as my 306? Would I be stupid not to? Wayne
  15. GTWayne

    What's the best way to break in a new block?

    Best way to break in a new block Thanks, I knew not to use synthetic but was concerned about how often to change early on and the impact to my Vortech. Wayne
  16. GTWayne

    Anyone with Lokar Oil Dipstick in 94/95??

    Lokar ED-5004 Do a search on the web for Lokar dipsticks, you'll find lots of places that sell them. I bent the holding mount in a 45 degree twist and used a valve cover bolt to hold it between number 6 and 7 header pipes. Works great. Wayne
  17. GTWayne

    What's the best way to break in a new block?

    What's the best way to break in a new shortblock on a supercharged car? Thanks Wayne
  18. GTWayne

    CHP Streetfighter 306 owners??

    Chp 306 Yep, got pretty good 1st time dyno numbers but I made a mistake and programmed my Mallory for the wrong MAP sensor. I thought I got a 3 bar and it came with a 2 bar. So it wasn't pulling as much timing as I needed to and when I was showing off on the street it detonated and blew a...
  19. GTWayne

    CHP Streetfighter 306 owners??

    Chp 306 Don't mind at all. I went with the 11773 Short block, 15cc dished probe pistons (for my TF TW heads and 15psi boost), main girdle, hi vol oil pump and pump shaft. The rest is standard with the 11773 set up. Including shipping to Abq (210) came to 2251.95 Wayne
  20. GTWayne

    CHP Streetfighter 306 owners??

    <marquee direction=right> :banana: :banana: :banana: </marquee> Just ordered my SB today. Was wondering how many CHP 306 owners are out there and what you think of yours? Thanks. Wayne
Top Bottom
Back
Forums
Menu