Search results

  1. M

    motor mounts?

    i bought the convertable mounts from Auto Zone they have a life time warranty and they were like 17 bucks each. So far have done a great job.
  2. M

    Still no turn signals.....HELP!!!!!!!!

    I am in the same boat exactly. I replaced both relays, fuses are good, hazards work, and replaced the actual switch assembly, let me know if you find out anything, I am going to check all the bulbs again, i did notice that my reverse lights aren't coming on, yet the bulbs look good. What gives?
  3. M

    turn signals don't flash

    i am having the same problem, my 89 mustang, the turn signals aren't working. I checked the bulbs, the fuse box under the steering wheel all good, replaced both flashers, replaced the actual assembly on the console. Hazards are working perfectly. No clue, any help?
  4. M

    Stroker motors how long have they lasted

    I'm not sure if I want to stroke my motor or just rebuild a solid 306/308. How long have your stokers lasted and how is the drivability? My stang is a daily driver and I still want a comfortable ride.
  5. M

    Saleen body kit

    any other pics of the s style body kit? looks funky. need to see it differently
  6. M

    Could you please list your aftermarket control arms and if you are satisfied

    I got the UPR Chromolly adjustable spherical bearing lowers and Mac tubular Eurathane uppers. The Upr work great but don't come with instructions or tips on where to start from to adjust them. The powder coating was pretty shoddy and chipped everywhere. You could see the metal imperfections...
  7. M

    Control arm removal

    Make sure you put a jack under the arm to take the spring load off of the arm. The bolts should come out nicely. Install the new arms with a good grease applied to the urathanes or you will get the skweaks not cool
  8. M

    Upper Control Arms

    These will work fine. The only thing you might want to do is box the arm in. Any shop can do this really cheap. Maximum Motorsports recommends them. If you don't box them no big deal. They are a good replacement.
  9. M

    Clean out Stock 4 Cat H-pipe

    I live in CA. I cut my cats out and replaced them with straight pipe. The folds on the metal that hole the heat sheild on can be removed then welded to the replacement pipe. Looks like a cat but is straight flow. Picked up lots of power. All bolt ons can you can get, flow so much better.
  10. M

    stupid question!

    the 40's will match the 245's better if you want them to be as tall as each other. the 45's on the rear will be a little taller.
  11. M

    Head Light Socket Question

    any 87-93 head light socket should work. The plastic retaining ring burned up on mine and I got a new one from the junk yard. $1.00 Doesn't matter if its a 4 banger
  12. M

    Should i get subframes?

    EVERYONE SHOULD HAVE SUBFRAME CONNECTORS> not bolt in, welded. You can buy the bolt ins. then bolt them in then weld them. Either way weld them. High schools and colleges always are looking for little projects like that. Talk to the instructors of the shop classes that weld.
  13. M

    cowl hood question/ rim + tire help

    I would reccomend the Cervinis. It is a very well made hood. Check on their web site you may like the look or the 3 inch over the 4.
  14. M

    How do you resolve tire rubbing in the front?

    I have molded the plastic with a heat gun. You may want to try this before you start choppong away at the liner. Once the plastic is warm enough use an old spoon to mold the liner or something round like that.
  15. M

    Confused About Exhaust

    Another good product is Mac. I have purchased almost all of their products. They are less expensive and are a good quality part. The pro chamber makes the best hp.
  16. M

    leather is nice

    the seats will bolt directly in as for the electrical I'm not sure.
View older results
Top Bottom
Back
Forums
Menu