Search results

  1. WORTH

    What the $

    Just to be clear, with a different trans and the new engine it was smooth? Vibe came instantly with the trans swap? You replaced, trans, flywheel, clutch, and driveshaft and that is all?
  2. WORTH

    66 steering box

    manual or power steering?? Also don't know where you live, but around here we have a ton of alignment shops that have very nice computerized alignment equipment and IDIOTS running them. So after you deal with your steering play, you need to find someone that can both check your front end and...
  3. WORTH

    1968 GT Fastback -390 install

    I have a 390 in my '66 F100 project, weight isn't an issue there.:)
  4. WORTH

    1968 GT Fastback -390 install

    Slight exaggeration, but was easy to spin tire in my '65 6cyl vert on a wet road, or starting on a turn. My point was they are too light for a big block if you are just out to have fun. You can make these things fun to drive with a 289-351 windsor, cheap and easy. IF you're just trying to boil...
  5. WORTH

    It's a 67 and I put a 2008 shelby gt500 in it and the engine is too big to fit the A/C in, any tips?

    I guessing you are using the wrong terms, the condenser is the cooler that looks like a radiator and it's mounted in front of the radiator. You need to have someone tell you what part is the problem and what part of the engine it is hitting, then I can help. ALso a picture or 2 of where they are...
  6. WORTH

    1970 mustang - torque converter won’t mate to flywheel

    at this point put it together, keep in mind it needs to slide together with the bell housing flush before you try to tighten, don't use the bolts to draw it together.
  7. WORTH

    Drop-In Engine Suggestions for 66 Coupe

    302 with an eec system and an edlebrock 4bbl. very reliable and easy to do.
  8. WORTH

    It's a 67 and I put a 2008 shelby gt500 in it and the engine is too big to fit the A/C in, any tips?

    I'm a bit confused here, what exactly is hitting on the" engine and the supercharger" ? The AC compressor?
  9. WORTH

    1970 mustang - torque converter won’t mate to flywheel

    Just a note, if the converter wasn't seated properly when he torqued the bell housing bolts he may have ruined the pump.
  10. WORTH

    It's a 67 and I put a 2008 shelby gt500 in it and the engine is too big to fit the A/C in, any tips?

    What is your clearance issue? what hits where?? Is the engine bolted up and useable with the exception of the A/C? If so can you take a few pictures from different angles?
  11. WORTH

    My 67 project

    Umm, he did a Shelby suspension drop, not an engine swap.
  12. WORTH

    Electrical 1969 Mach1 battery/electrical issues

    the spark indicates a bad connection, so I'm guessing you have a cable problem. have you tried to charge the battery disconnected from the car? What are you charging with? Does your charger actually work? The odds of you having 2 batteries that wont charge are pretty slim. Have you put a meter...
  13. WORTH

    My 67 project

    Ya, I share your eyes, I just bought about 20 LED shop lights and installed them. It's like sunshine out there now, made a huge difference. And I beat myself up for the past 2 months and dropped 30 lbs. That should help a bit too.:)
  14. WORTH

    Where can I find a 351C engine?

    If you want agressive and street friendly in a stang , I'd go 302/351w, and no blower, if you have your heart set on old school.
  15. WORTH

    Where can I find a 351C engine?

    IF your just looking for a crazy alternative 460's are easier to find.
  16. WORTH

    Just a cool video

    When was the last time your Stang looked that good???
  17. WORTH

    Heater, Do I need it?

    The benefit is not from the hose, but from the water circulating. Helps to even the temp in the engine. We never had oveheating problems with the Fords with plugged heaters, but the small block chevys would overheat without a heater or a hose to bypass it. So I've always figured it can't hurt on...
  18. WORTH

    Heater, Do I need it?

    If you don't like the look of the hose with a big loop, like Scaraj's pix, you can replace the intake fitting with a 90 degree fitting to clean it up a bit.
  19. WORTH

    Electrical 1973 Electrical Issues fuse numbering

    The wire colors should be correct even if the #'s are wrong. flip the box and go by the wires.
  20. WORTH

    Rebuilt the 5.0 but it's got an oil leak

    It may also have been the valve cover gasket.
Top Bottom
Back
Forums
Menu