Search results

  1. BBrinks

    This has got be the biggest ripoff....

    Take a look at their turbo exhaust tube. It's unbelievable that people buy into this stuff.
  2. BBrinks

    mach 460 replacement help

    Definitely ditch the stock head unit and front speakers. For the HU, I'd get an Alpine CDA-9811/9813 depending on your budget, and for the fronts, get some Alpine Type-R 5x7 coaxils/5 1/4" components. You'll have to run new speaker wire from the HU to the speakers, or at the very least tap...
  3. BBrinks

    Alpine Type-S 12's

    The S's should be fine for you. The R's like a lot of power, and if you're only going to be able to give them 225 each, they probably wouldn't be much difference than the S's. I'd recommend the R's if you gave them 400+ RMS, but for that power, the S's will be fine.
  4. BBrinks

    Mach 1000 Questions

    If you're looking to add subs, how much are you looking at spending?
  5. BBrinks

    Car Audio Forums?

    CDT is the name of the manufacturer: http://www.cdtaudio.com/car_audio.htm and can be found here: http://www.thezeb.com/caraudio/CDT_Audio_Components.html Also, ED is Elemental Designs: http://www.edesignaudio.com/ If you want to add them to your system, and get the full potential out of them...
  6. BBrinks

    Mach 1000 Questions

    Shouldn't be too expensive. I think they changed the harness after 2001, so you might have to go to best buy or circuit ciry or a local installer, and they should have one. Not sure on the price, though.
  7. BBrinks

    Mach 1000 Questions

    Yeah, you just need the harness made for the mach460 system. Be glad you didn't pay extra for the 1000. Some decent aftermarket equipment puts it to shame pretty easily.
  8. BBrinks

    Can the alt. handle this?

    I know what you mean. I'm still not sure which sub to run, I still have about 5 choices. I know the O will be louder than the K sealed, but the K's should get pretty loud, while having great SQ, ported.
  9. BBrinks

    Mach 1000 Questions

    Welcome to the boards. If you have the 1000, there will also be 4 amps in a rack in the trunk: http://www.classicdesignconcepts.com/catalog/itemdisplay/589.html The Mach460 is the same, just without the 2 subs, and 2 less amps. Most likely, you have the 460. Bill
  10. BBrinks

    Can the alt. handle this?

    I think the 650.2's are 7.25" O.D., too, so good thing you got the 550.2. With about 500W sealed, those should sound loud enough. I'd actually recommend the O series if you're going to run that much power to them. They're meant to be run sealed, though you'll be about $20 over your 450 mark...
  11. BBrinks

    How can I swap to a 2001+ Stereo

    Look familiar? She's been great over the last year and a half. It's in storage over the winter right now, and I've been doing some things to it. Besides the stereo, aluminum driveshaft(stock one bent), stock h-pipe :( (had to sell O/R X cause of emissions), tires, and some interior stuff...
  12. BBrinks

    Can the alt. handle this?

    Like he said, you should be fine. Good choice in equipment, too. What series of viper's did you get? 550.2 or 650.2? Also, are you going to run the 12k sealed or ported?
  13. BBrinks

    new to subs and boxes...

    If you are looking at firing them through the hole going into the trunk, you'll need to completely seal off the trunk from the cabin of the car, or you're going to get major cancellation. If you want to do something somewhat different than most, you could fire the subs towards the rear, which...
  14. BBrinks

    How can I swap to a 2001+ Stereo

    If you have the stock system, they should be interchangeable. I don't have the wiring diagrams, though, and I'm not positive as to what they changed, if anything, when they changed to the 1.5 din unit. That, and the bezel, like you mentioned, should be it.
  15. BBrinks

    Speaker sizes??

    They're 6x8(5x7) all around.
  16. BBrinks

    Where are the amps?

    Here's everything you need to know about the mach system: http://www.flemworld.com/Mach460/mach.html
  17. BBrinks

    quick question

    Glad to hear everything went smoothly. Where'd you end up moving the amp?
  18. BBrinks

    sealed boxes

    Silicone's fine to use, as long as you let it cure for 24 hours before you drop in the sub. The only harmful fumes it produces are when it's curing.
  19. BBrinks

    MOVED: Can you make A Mach 460 System into a 1000?

    I don't think there's too much involved, but for the price you add in the mach 1000 components, you could just get an aftermarket system that will kill it. Check out this thread from a while back: http://forums.stangnet.com/showthread.php?t=387314
  20. BBrinks

    No sound...factory amp?

    The factory amp needs a remote wire going to it, too. Try splicing the main remote wire into the two remote leads, the one for the factory amp, and the other for the amp that goes to the subs. The reason only the subs work is because that amp is the only one that's getting power on the remote...
Top Bottom
Back
Forums
Menu