Search results

  1. Repostyle

    t5 swap pedal question

    As posted, it can be done with the column still attached and just dropped to the floor. But it's just 2 minutes of extra work to completely remove it and get it completely out of the way. I pulled mine out for the pedels. Just get the kids out of the garage and use some profanity and...
  2. Repostyle

    Grease in my tri-ax shifter?

    Mine came packed with grease new, leave it there, or clean out and replace with new clean grease. It will prevent wear and tear and also acts as somewhat of a seal to keep trans fluid in.
  3. Repostyle

    bullet flywheel

    This isn't tech. Should be moved to the classifieds.
  4. Repostyle

    I sprung a leak

    I don't recommend this option, just because of the possibility of getting metal shavings in the rack. The best advice for any job is to just take your time, short cuts are usually the long way.
  5. Repostyle

    87-93 Door Latch Assembly

    :nice:
  6. Repostyle

    I call BS! How about you?

    I get the impression from John that the guy is saying it's a stock 302 with a different carb and suspension, that's it.
  7. Repostyle

    nitrous or supercharger??

    You're 100% correct. I don't know how I can save myself after a stupid comment like that. I just don't know what I was thinking, I think I was drinking, maybe I was just too tired to be posting, or my computer is actually a Ouija board and a ghost wrote that. Any of those work? LOL I...
  8. Repostyle

    cool vid

    That black Stang is sick! Cool vid, and yup, it's "sily" to work on that for 110 days only to leave out one simple letter. I liked it though.
  9. Repostyle

    nitrous or supercharger??

    I think he was saying that nitrous is only good when it's used to get rid of an unwanted passenger. Nitrous is cheaper to buy the setup than a sc or turbo setup. But as far as maint and running costs, sc's and turbo's don't get clogged injection jets, and use the same fuel you already have...
  10. Repostyle

    smoothing engine bay

    I'm sceeerrd. I'm waiting to see how it looks finished with the engine back in it. I'm on the fence, I think the idea of fiberglass is definatly new, but I also agree that with a little more work it could look nice at first. I just don't know how well it will hold up in the long run. So as...
  11. Repostyle

    Flywheel/flexplate bolt difference

    just get these and call it a day: 79-95 V8 Mustang Pro Series Flywheel Bolt Kit, 7/16"X20x1", 6Pc, 12 Point Head by ARP at LRS - Same Day Shipping!
  12. Repostyle

    Those with full Eibach Pro Kit suspension installs, how does it ride?

    I like mine, the ride is a little rougher, but it corners 10x better. I used SN95 front spindles for my 5 lug swap and that greatly improved that "floating" feel and the lane change drift. Stock sway bar. I think the rougher ride came more from the smaller tires on 17's vs more rubber on the...
  13. Repostyle

    Blue smoke after Cobra intake install?

    Why do most of the knock off brands do this? What's causing it and what's the fix? I have a knock off cobra intake on my vert, but I haven't had any problems with it.
  14. Repostyle

    Rookie Lookin For Help

    Most people do the swap because the car itself is worth it, (ie super nice.) or they already had a really nice 5.0 car with money invested in aftermarket parts and wrecked it. If you're starting from scratch, it's not really worth the work and money involved unless you get a great deal on a...
  15. Repostyle

    Quad Shock problem....FOX 03 Cobra wheels

    If you're going any bigger than 1/4" spacer change the studs to longer ones. IMO just replace the axles with sn95's and gain 3/4" each side for just a little more money. I picked up a set for like $40 at the jy.
  16. Repostyle

    Another Electrical Issue Temp Gauge Increase When Lights Are On...

    The speedo is a seperate problem, it's mechanical, driven by a cable. That could be a bad cable or broken gear.
  17. Repostyle

    StangNet '11 5.0 Notch Project

    So any progress updates? What have you done so far? When do you think the completion date will be? I can't wait!