Search results

  1. I

    Canned tune vs. custom dyno run with a CAI

    A custom tune is worth a few extra ponies. Tuner needs to be on the dyno and know how to tune an 05 though. 05's are quite a bit different. Im pretty sure you would need a PC to get email tunes.
  2. I

    Tips/tricks on replacing motor mounts...PLEASE !!!

    You actually dont even have to support the motor. Trans will only let the motor go down so far
  3. I

    Noise when turning after suspension work

    either something wasnt installed right, or you might need the steeda X2 balljoints if the car has been lowered more than 1.5"
  4. I

    Best Fuel pump upgrade for 01 gt with around 450rwhp

    best route is the dual cobra pumps and tank
  5. I

    Tips/tricks on replacing motor mounts...PLEASE !!!

    you have to drop the K-member. Once you have about 6-8 inches of space between the K-member and the frame, then you can remove them. And no, you dont have to remove the starter. There is only 1 bolt over there and you can get it with starter in place.
  6. I

    What Can i do next / Need more power ;)

    Go to a place you feel comfortable with after talking to them. If you can have it dyno tuned, then do it. If you cant, then do a mail order tune with someone who has tuned 05's before.
  7. I

    which tuner? Predator or XCalibrator 2

    Well, my opinion is a little biased. Havent had any complaints with the predator. Have sold and tuned several 05's with them.
  8. I

    Tuner, Nitrus, tuner & Intake ?

    C&L have a good intake setup. Or you could just get the nitrous and tune done. Whatever you do, get a tune done. Always recommended to get a dyno tune done. Bassani has the most expensive mufflers/tip, but they make the most power according to MMFF. Flowmaster is cheap and has that deep...
  9. I

    Got Predator! Need tune please!

    Jennifer, If you need further assistance, dont hesitate to call us. Im sure diablo can help you though. We have tuned several 05 GT's
  10. I

    Need car for prototype Radiator

    Now this is a deal. First person I get commited (call and schedule appointment) will get this. These are the new LFP radiators for the 05 GT. The customer will get the radiator free, and only be out labor. The customer must be willing to drop their car off to me in SW MO. Now keep in mind, this...
  11. I

    Headers on 03 cobra

    stock manifolds are pretty good from the start. No need to upgrade unless your bored one day.
  12. I

    The new 03 Cobra owner million dollar question

    FIPK and Steeda will make most power. JLT looks the best though. With just a pulley and an unknown CAI, I tuned a cobra on the rollers that made 460rwhp and 485rwtq. $250 in mods, plus the tune. So 500 can be had without touching the blower bolts.
  13. I

    Best CAI period for the Terminator?

    We picked up 25rwhp from going from stock box to a FIPK with a big open filter.
  14. I

    03 anniversary on the way

    I have a steeda catback on mine and I love it. No drone, and it sounds killer when you get on it. CAI, pulley, and tune are your biggest gainers.
  15. I

    buying an 03 cobra today what first???

    next time your in springfield, you should swing by the shop
  16. I

    buying an 03 cobra today what first???

    pulley, intake, exhaust, HE, and a tune. 4.6modular - not sure I have seen you around.
  17. I

    The new 03 Cobra owner million dollar question

    2.76 pulley, intake, and a catback if you want a good sound. With a tune thats a 455rwhp, 485rwtq car.
  18. I

    Custom Tuners

    its always best to get a custom tune. The tuner can make fueling changes based on your dyno A/F chart and make changes accordingly and email them to you.
  19. I

    What are all the parts needed for a rear gear swap

    if your getting the FMS gears, they will come with some shims, crush sleeve, and pinion nut. That will be all you need in parts unless you need new bearings or seals.
  20. I

    Any ideas for the next mod?????

    save up a little more and put the blower on it. If you want handling, then go for the suspension
Top Bottom
Back
Forums
Menu