Search results

  1. Z

    This must be the wrong CAI!!!

    looks like the ones off of Ebay
  2. Z

    Calling all Engine Techs !!!!!

    pull the engine and put in a stocker kit
  3. Z

    Rocker hitting vavle retainer!!! what are my options

    If there to short shims would make it worse you need longer pushrods
  4. Z

    If you have AFR 185's and big cam please read

    To be honest I don't know. I had friend that knew someone thats was selling a cam from a car that ran 10's with NOS so i bought and my buddy installed it when he built my 347, all he told me its was a big cam, the problem is I the rockers arms are real loud and the cylinder 1 rockers have...
  5. Z

    If you have AFR 185's and big cam please read

    ranchero do you have a 347? I can't see how you guys are still running stock push rod length, I have never used a pushrod length checker before. I anyone else ? I thinking around the 6.40 length is needed for this application
  6. Z

    If you have AFR 185's and big cam please read

    TTT
  7. Z

    If you have AFR 185's and big cam please read

    ttt
  8. Z

    If you have AFR 185's and big cam please read

    I got a 347 with a nitrous cam and 185's I need to know what length pushrods are you running, the stock ones are to short, I also have stud mount rockers
  9. Z

    How can you tell if your intake is leaking?

    do a vacum test
  10. Z

    If you have GT with a Cobra Rear Bumper please Post PIc

    this will decide if I will get one.
  11. Z

    what intake to get for a 347 with 185 AFR's?

    is the GT 40 Upper Box any good? I was thinking about using a truck lower and the gt 40 upper Box is this a good choice?
  12. Z

    PLEASE HELP ! injector / fuel problems ...

    make sure that all the wires are connected tightly on the hot side if the starter relay thats mounted on the side of engine bay, I had this same problem i had few wires that had a loose connection
  13. Z

    Help 1st trip to track! Ran 15's

    yea thats pretty bad times whats your timming at?, last tune up?
  14. Z

    just put in my 347 now fule pump won't kick on.

    find the problem didn't have the bolt all the way snug on the hot side of the starter solenoid
  15. Z

    guys with 347's post combos and RW Horse power please

    keep them coming
  16. Z

    guys with 347's post combos and RW Horse power please

    Just put in my 347 with AFR and nitrous cam, still trying to work out an intake combo and the bugs on the car its a Auto.
  17. Z

    just put in my 347 now fule pump won't kick on.

    there is a ground wire off the fuel injector harness and one off the firewall I put them under the bolt the bolts down with a washer to the lower intake, maybe its not getting a good ground, also I can jump start the fuel pump with a jump wire on the fuel relay. but the car won't start still.
  18. Z

    just put in my 347 now fule pump won't kick on.

    even if i turn the distrubuter the pump won't kick on, I put in a another relay and it worked for a second and then it shut off. The car has a new 190lph pump,the pump worked fine before the engine swap, any Ideas?
  19. Z

    Misfire...tried everything

    check your timing.
  20. Z

    just hooked up the new power starter got a major problem

    started her up and the starter solenoid (mounted on the firewall) smoked and the battery blew up. can't figure it why it blew up. on the starter it has to terminals one small and one large, I hooked the stock starter wire up to the large terminal, and moved the location of it on the starter...
Top Bottom
Back
Forums
Menu