Search results

  1. F

    Door tag decoder

    From my site. https://www.foxchassis.com/decoders
  2. F

    Door tag decoder

    Date - 05/92 = May 1992 build GVWR - 4273 lb/1938 kg = gross vehicle weight rating Front GAWR - 2262 lb/1026 kg = front gross axle weight rating Rear GAWR - 2031 lb/921 kg = rear gross axle weight rating F0125 = 0125 lbs front accessory reserve load R0131 = 0131 lbs rear accessory reserve load...
  3. F

    Drivetrain Help identifying t5?

    Also, M" in the engineering number prefix means Ford Motorsport.
  4. F

    Fox Buck Tag help!??

    1987-93 VIN locations... Full VIN (small sticker on all major body parts): 1. front bumper cover (grill area, lift hood to see) 2. left fender (inside engine compartment) 3. right fender (inside engine compartment) 4. hood (inside engine compartment) 5. left door (bottom) 6. right door...
  5. F

    Fox Buck Tag help!??

    The VIN under the fenders is only a partial (last 8), same as on the engine and trans.
  6. F

    Fox Buck Tag help!??

    1627 = body & paint rotations #1627 GT3 = Mustang GT 2-door hatchback GT = GT model/trim level E2 = SEFI H.O. 5.0L engine (E), Borg Warner T-5 5-speed manual transmission (2) 149543 = 49,543rd 1990 Ford scheduled for production at Dearborn Assembly AC = manual air conditioner HB = heated...
  7. F

    LED vs HID 93 Mustang

    HID and LED are :poo: in everything that didn't come with them originally, unless the CONVERSION is done right. Swapping one of those "bulbs" into reflector housing is not a "conversion". That's a cheap-ass way to now say you got "brighter" lights. BFD. They're only brighter because the output...
  8. F

    Engine Correct Gap For 1991 Mustang GT With Motorcraft Plugs

    Same plug. Suffix 'A' just means a different manufacturer/supplier.
  9. F

    1993 Cobra Rearend?

    There is a date code on the differential housing
  10. F

    Drivetrain T5 / World Class Identification

    Date on the tag indicates the transmission was built in calendar year 1992, for a 1993 model year Mustang. K1923 = built October 19, 1992, on 3rd shift If the main case had a partial VIN on it, it should start with PF1.
  11. F

    1984 Mustang Rear Shocks

    The 'Quadra-Shock rear suspension' include all four dampners, not just the horizontal axle dampners.
  12. F

    Fox LX seats differences

    Not all of them. Some of the 'loaded' units, especially the GSA orders, got the sport seats.
  13. F

    Fox LX seats differences

    LX 5.0L coupes got 'sport' (GT) seats as standard equipment starting in the 1991 model year. LX (non-5.0L) coupes still had the base seats, every model year, through 1993. Sport seats were not optional after 1984. You either got them as standard equipment or you didn't get them at all. The...
  14. F

    What's the best tranny pan gasket to use for my '93 AOD?

    Rubber with a steel frame Moroso 93106 $40 from a number of places
  15. F

    Drivetrain How to identify year of rear end?

    F0ZW-xx just tells you what it was originally engineered for, a 1990 Mustang. That engineering number prefix (F0 = 1990) gets carried forward every year, and possibly on multiple models, until it get's a major update. It doesn't change every year so it does not tell you it is from a 1990...
  16. F

    Louvers for my 85 GT

    From the dealer. Not from the factory. The factory didn't offer them after 1984. Because the real factory louvers don't fit later cars with the spoiler that comes closer to the lower corners of the glass and trim. You want louvers on an 84.5 and later you need aftermarket.
  17. F

    Louvers for my 85 GT

    There was no factory louver option after model year 1983. And even model year 1983 that option was very, very rare. I see the lower mounting points of those louvers on that 86 are not attached. Because they don't fit that car.
  18. F

    Louvers for my 85 GT

    Factory are 12-slat and they will not fit 84.5 and newer (one-piece spoiler). Aftermarket are 10 slats or less.
  19. F

    Foxtoberfest 2022

    Parts are anywhere from a 24 ft box truck packed full to a guy with a table selling a dozen parts. I'd say 30-40 different spots each year. It's at a big venue so lots of space for parts.