Search results

  1. onefaststang

    Ccrm Issue

    I was starting to think pcm myself. I guess I will have to try and trace the wiring back to the pcm as well. Probably won't happen tomorrow since its mothers day and all.
  2. onefaststang

    Ccrm Issue

    Also dtc's are P0353, P0354, P0153 and P0175.
  3. onefaststang

    Ccrm Issue

    Got time to take a look at it today. Had no spark on the drivers side coil pack, cylinders 3 and 8. Both on the same side of the coil. Replaced that coil. Ran new ground from frame to engine and engine to battery. Spark is back. Took it for a ride and it will start to miss again. I don't...
  4. onefaststang

    Ccrm Issue

    I'm assuming replacement coils are bad based on it did exactly what it did previously. Changed the coil packs and it ran good. It's on the side of the road now so I will check grounds after work. I don't have any way to get under it until I can get it towed home.
  5. onefaststang

    Ccrm Issue

    Let's re visit this. Car has been running good for 2 weeks with new coil packs. This morning on the way to work it started skipping and the fuse popped again. It's there something before the coil packs that would cause one to go bad?
  6. onefaststang

    Ccrm Issue

    Went out and swapped the coils with the explorer tonight. Only got to take a quick ride but it seems to have fixed the problem. Think I will order a set of the screamin demon coils tonight.
  7. onefaststang

    Ccrm Issue

    Sure am. Glad I have the tools and knowledge of places like this. I have not changed the coil yet. Probably next weekend. I may just go yank then off my wife's explorer and see if that works.
  8. onefaststang

    Ccrm Issue

    Did an injector pull test. Looks like #3 and #5 make no difference in idle. All others it drops off bad. These 2 plugs are both on the same coil. When I did this the first time around I thought it was #7 the was missing so it seems it does follow the coil. I guess the next logical step is to...
  9. onefaststang

    Ccrm Issue

    ok, first off I was wrong about the number of o2 sensors. There were 4. 2 right before the front cat, 2 right after the front cat. It looks like I might have 2 different issues going on. The front sensor on the drivers side, the black wire was actually cut and spliced back together poorly...
  10. onefaststang

    Ccrm Issue

    Cycling the key to the on position a couple times would blow the fuse. Car does not need to run. I previously swapped one of the coil packs out thinking that was the problem originally but it made no difference. I just swapped the coil that I took out for the other coil. started and ran but...
  11. onefaststang

    Ccrm Issue

    The fuse the blows in under the dash. #20 There is no cover on the box so by my search that is the instrument cluster, pats, ccrm and ignition system. There are no rear sensors on the car. I vaguely remember the previous owner mentioning removing the rear sensors. I will have to get the car...
  12. onefaststang

    Ccrm Issue

    removed ccrm. put power to pin #1 fan runs #2 fan runs #5 fuel pump runs. This leads me to believe my wiring from the ccrm to the pump is fine. Is there anything before the ccrm that may also be an issue?
  13. onefaststang

    Ccrm Issue

    I have been searching the forums, and it seems every thread dies before the issue is solved. I believe I have a CCRM issue. Car started acting like it had a miss. I pulled the plugs re-gapped and put them back in. Wires are good. Car ran ok for a day, the started acting up again. I noticed...
  14. onefaststang

    official 4.6 liter Mustang photo thread

    Don't think I have been in on this one yet.
  15. onefaststang

    Would You Guys Trade Your Fox For A Sn95?

    I like mine, but I wouldn't trade my notch for it.
  16. onefaststang

    Would You Guys Trade Your Fox For A Sn95?

    Own them both simple answer. Someday I will have one of every body style, well except for the II. Just can't do it.
  17. onefaststang

    1999 Mustang GT 5 Speed $4,900 Obo

    How about a few better pictures of the car?
  18. onefaststang

    StangNet '11 5.0 Notch Project

    mike did you contact brian at b&g turbo?
  19. onefaststang

    StangNet '11 5.0 Notch Project

    I would be willing to bet brian from B&G turbo would weld up a set of headers.