Search results

  1. rich89lx

    Dynamic Racing Radiator

    Yep I am still waiting on my billet steering shaft from dynamic racing its been a month now they shipped a power steering shaft when I ordered a manual shaft off of ebay so be careful he told me he shipped the correct one last week priority mail and six days later nothing
  2. rich89lx

    alternator wiring

    Thanks for all the help and suggestions I will try them and see what happens thanks, Richard
  3. rich89lx

    alternator wiring

    I took it out around the block a couple of miles and the volt meter was below 6 it didnt move so its not charging could it be that wire from the alt going to the battery Thanks, Rich
  4. rich89lx

    alternator wiring

    Well I finally got under neath and it says battery on the back of the alt so I'm assuming since it was a hot wire it goes to the battery to charge it and the previous owner used an 8gauge amp wire to run to the battery so since I relocated the battery to the hatch area I willl need to extend...
  5. rich89lx

    alternator wiring

    I just relocated my battery to the hatch in my 91GTand I lost track of this one wire that comes off the alternator that I believe connected to the positive side of the battery. It is a hot wire because it was touching my frame and it started melting, so do I hook it up to the battery again is...
  6. rich89lx

    91GT surging

    This is a list of things done:302 Short Block has about 50K miles on it and Vortech A-trim Supercharger with less than 5k on it. The car was dyno tuned at Lamotta Mustang. It has a Cobra Upper and Lower intake, Tremec 3500 transmission, steeda short shifter, cobra rims, 65MM throttle Body, 30lb...
  7. rich89lx

    oil psi

    I installed a autometer electric oil pressure gauge for my 97 4.6 Cobra and it is reading about 85psi I do not have a stock oil pan I have a canton 7qt I read in the Haynes manual and its saying 20-45 psi at 1500rpm and I am running at 80psi at 1000rpm please any help Thanks, Richard
  8. rich89lx

    coil over help

    coil-over? javascript:ShowImage('http://www.cardomain.com/member_pages/show_image.pl?fg=000000&bg=6666FF&migration=1&image=http://memimage.cardomain.net/member_images/6/web/318000-318999/318573_9_full.jpg', 565, 404); I recently installed a set of coil over on my 97 Cobra now the springs are...
  9. rich89lx

    k-member frustration

    anyone please help
  10. rich89lx

    k-member frustration

    I bought a QA1 k-member a few months ago on ebayfor my 97 Cobra and just now getting around to putting it in and it wont fit it keeps hitting the oil filter housing I removed the filter It just seems I am a few inches short do I need to relocte the filter housing is that possible or did they...
  11. rich89lx

    97 Cobra dyno numbers

    Okay, Thanks 5.0's 4ever
  12. rich89lx

    97 Cobra dyno numbers

    Who is Jake and were is his dynojet I wouldnt mind trying it on the dynojet
  13. rich89lx

    97 Cobra dyno numbers

    Yes mustang dyno I did not know there was a difference but I do now Thanks again for everyones input
  14. rich89lx

    97 Cobra dyno numbers

    I posted the same message on the Corral and they said the mustang dyno was 241 so a dynojet would make it 274rwhp is that correct Thanks for the help and I will also clean my IMRC
  15. rich89lx

    97 Cobra dyno numbers

    I live off Maitland Blvd I heard alot about Lamotta I might start going to them I dont have aol so I cant shoot you a pm but email me at [email protected]
  16. rich89lx

    97 Cobra dyno numbers

    I know I went to Lugo in Apopka they installed everything should I go somewhere else
  17. rich89lx

    97 Cobra dyno numbers

    I have a 97 Cobra mods are 4.10,Diablo chip,x-pipe, and 40 series flowmaster and it dynos at 241rwhp anything wrong or suggestions Thanks, Rich
Top Bottom
Back
Forums
Menu