Search results

  1. Go HoTO!

    How much rwhp loss would you expect from switching from 3.27 to 4.10 gears?

    You will loose 2 - 3 HP on the dyno. This is due to the increase in the amount of friction with 4.01's. It is merely nothing and other factors like weather will certainly affect dyno results much more.
  2. Go HoTO!

    MustangTuning CATTED X PIPE!!??!!!!!

    Sure, but in some places the cops check. Straight through exhaust or any muffler system w/o baffles is illegal in a lot of places. OR X pipes will slowly become a thing of the past. Is the mustang tuning x pipe made of stainless? If it is, then the price is great! If not, it's not the end...
  3. Go HoTO!

    TUNE ?

    In my opion anything that you do to the car that can bring in more air can cause some leaning. This has been proven over and over again on dynos. Just removing the MAF screen will cause a car to run a little lean. Though, as modded, and w/o a blower any leaning that would result should be...
  4. Go HoTO!

    K&N Air Filter Cleaning

    Said like a pro! I guess then with my air restriction gauge, I am still in good shape after 45k miles. My Suburban mostly gets driven on the highway.
  5. Go HoTO!

    K&N Air Filter Cleaning

    You guys missing the point and cleaning the filter way too often. The filter works better the dirtier it gets....that's the idea. Cleaning it every 30k - 50k is perfect. You are not supposed to clean these things so frequently. Besides, the oil gets all over the MAF wires if you are not...
  6. Go HoTO!

    AHHHHHH, what soap?

    I use Maguires Crystal Wash
  7. Go HoTO!

    Used Tri-ax

    You are all missing something here, he said "Turbo Mach 1". I am still getting over that!
  8. Go HoTO!

    C&L intake pipe

    I had zero problems getting mine to fit.
  9. Go HoTO!

    X pipe or H pipe?

    You will be better off making your final choice based on sound as the hp gains are pretty close to the same no matter what you choose. As a rule, though, the more straight through designs give the most hp and are the loudest. Different configurations sound differently to different people...
  10. Go HoTO!

    Performance Questions

    As already stated, wait on the chip. But, a programmer is not a bad idea due to the flexibility they have to grow with your car. Programmer Cost - $400 (give or take) Speed Cal - $100 Timing Adjuster - $150 Total - $250 So, you have to ask yourself, is it worth it to spend $150 to...
  11. Go HoTO!

    A Problem

    Low brake fluid! Check your resorvoir.
  12. Go HoTO!

    nitrous questions

    Read this thread and my comments: http://forums.stangnet.com/showthread.php?t=486128 Also, you are thinking "old school" in regards to nitrous activation. With modern systems, you merely "activate" them and they spray depending on programmed conditions depending on the system you have...
  13. Go HoTO!

    X pipe or H pipe?

    I agree too. The combo sounds great to me.
  14. Go HoTO!

    lean Lean LEAN

    Get rid of the C&L MAF! Put your stock one back on...problem solved. Seriously, do this and hit the track again. Those C&L MAF kits are designed to lean by 30% and you can't fix it w/o a dyno tune. I had the same problem with my car. Your chip maybe further adding to the problem by...
  15. Go HoTO!

    Peeps with an O/R Pipe...HELP!

    You may be running rich. The cats were hiding this fact.
  16. Go HoTO!

    X pipe or H pipe?

    X Pipes flow better up high and H pipes give you alittle more low end. I suspect this is why Ford went with the H for the mod engine. Either way, get rid of the cats if your only concern in hp. For the most part, X pipes are all about the same as far as hp is concerned as long as it is a...
  17. Go HoTO!

    Found something when installing shifter

    No...NO...NO it was a little known option that year for a passenger ejection seat.
  18. Go HoTO!

    Wheel problem

    Question is will the rear deep dish match your fronts that you already have close enough? If they were painted, I'de say no. But with chrome, hum...not sure.
  19. Go HoTO!

    sorry for this

    The Tremecs are a more iron clad tranny, but they do have the grinding issue.
  20. Go HoTO!

    HELP, I THINK IM SCREWED!!

    Probably a fuse or fuses. Check them all.
View older results
Top Bottom
Back
Forums
Menu