Search results

  1. S

    swiss cheese engine bay

    Holes in Engine bay Just leave them. Ford has them for reasons. They help move air through the engine bay to disipate heat when the car is standing still at idle. If you are concerned about some, buy an assortment of rubber plugs and use them in some areas to prevent water from getting in...
  2. S

    WANTED: Pics of interiors with Stock Fox radios.

    Bought my 91 GT new 20 years ago. Took out the stock radio, amp, spearkers 2 weeks after in 8/91 for an aftermarket setup that i did myself and kept all original radio, amp, speakers and parts. Original wiring is left in place as i even ran my own wiring. I was thinking of going back to stock...
  3. S

    4 lug brake upgrade

    Great thread... I use an auto brake bleeder as well because this statement is so true... "Bleeding the brakes will require 2 people and some coordinated effort. I don’t recommend using you wife or girlfriend to pump the pedal – they get offended when you yell at them." I would like to...
  4. S

    Power Windows stayed down - Please Help!

    LRSjmac is correct about exact replacements from LRS. Bought new motors from LRS, installed them, but motors only work in one direction, down like my factory original motors that i took out on my 91. I even bench tested all 4 motors, both new and old, and they work fine hooked up to a car...
  5. S

    Power windows int inop

    Simular issue is happening with me on my 1991 Mustang GT. Windows only roll down, not up. Slammed the passenger door messing with the up and down window button on that door. It went up then stopped working. Drivers side only goes down. When i press the up button, i can hear a relay clicking...
  6. S

    Anyone have this shifter?? (pic)

    This shifter will make your 80's or 90's Mustang look like an old 70's Customized Nova. Jack up the back end with taller springs after you install this, like people did with these cars, to make it look cool. Shifter looks a step back in technology to me and would not look good with today's...
  7. S

    5.0 at the Shop - am I being Had?

    This is not a bad price. My brother had his 87 Saleen Trans rebuilt, taken out, new clutch and all for around the same. Transmission blew 2 months later, he had it towed back and they tore it all down again and rebuilt it for free this time. Somthing was not right, the clutch cable was not...
  8. S

    weak e-break

    E-brake finally holds Got the E-brake to hold at 1300 RPM but not much over. It still seemed to roll an inch during inspection but the guy never felt it or did not care. Replaced shoes, springs, adjuster mechinizm and hardware, along with putting the adjustable center E-brake cable from...
  9. S

    weak e-break

    Parking Brake during MA inspection Ok, I failed my MA safety inspection yesterday because my E-brake cant hold the car at 1300 RPM when the inspector lets off the clutch. I did not go to my normal inpection place, because they are not open on Saturday's. The usual place I go, does not seem to...
Top Bottom
Back
Forums
Menu