Search results

  1. Trboh22

    Body work--looking to get an idea of cost

    that one little spot could be pulled and straightened fairly easy. The paint won't quite match up, but a good painter can match faded paint fairly well...Not worth replacing a quarter skin for that little corner. Take it to a shop for an estimate....they are generally free.
  2. Trboh22

    Clunk after putting car in gear

    check the tranny mount, but check the motor mounts too.
  3. Trboh22

    First timer

    165's or 185's would pry be best unless you plan on a BIG Stroker...205's are kinda overkill. Get a custom grind cam, for just a little more money than a "shelf" cam, and pick an intake. Edelbrock seems to be the most popular it seems. Could always add a blower for $1000.00 on down the road!
  4. Trboh22

    Just brought it home!!! 88GT!

    Grats!!! I just picked up my 88, hard to believe these things are classics lol. NEED PICS!!! :nice:
  5. Trboh22

    Help identifying Engine and picking cam

    Woot!! It appears I'm worrying for nothing. I have the 19lb injectors (a sign of the h.o.), and when I pulled the plate off the intake manifold it has H.O. Stamped on it....and just to be sure the Compute is the the EEC IV from the h.o. Speed densit is my only prob now, but megasquirt will...
  6. Trboh22

    Mob's project thread

    Very true, hopefully you get her up and going good again, and get the pieces you sold replaced!:)
  7. Trboh22

    First timer

    B&G Custom turbo kit $3000.00, Megasquirt ECU $500.00, Injectors and pump $400.00 M&M Suspension $3500.00 400+ HP, and a good handling car :shrug: Of course, thats just what I would do with that kinda money, and I've never been one to take the smartest route...A Good HCI Combo, and a...
  8. Trboh22

    Help identifying Engine and picking cam

    My understanding is that it was just laying around, I'm going off the intake manifold. Will check firing order in the a.m.
  9. Trboh22

    Help identifying Engine and picking cam

    **bump** anyone have any ideas? Been searching for an answer, but everything I see doesn't answer what the difference between an H.O. and a Non H.O. and what I would need to do to make it "compareble"
  10. Trboh22

    Mob's project thread

    I don't want to be negative or anything, and I know what it's like to lose your license for whatever reason, which means lose money too...but are you basically going back to where you started right now? Was gonna be a turbo, but now, just the stock motor, cam, and a different intake? When are...
  11. Trboh22

    Just picked up my next Project!

    Update #1: My damn rear window came out of the vert top lol!!!! Update#2: This is obviously not an H.O. Engine, I believe it's out of a Crown Vic more than likely, other than the heads and Cam, what is different (firing order, hydro cam?, yada yada yada..... anyone know if anyone sells an...
  12. Trboh22

    Just picked up my next Project!

    Scottsbluff County the other tip of the state lol. Bordering colorado and wyoming kind of.
  13. Trboh22

    Just picked up my next Project!

    Something along the lines of these is what I'm looking at
  14. Trboh22

    Just picked up my next Project!

    Saw those, I'll pry grab whatever is cheapest. Going turbo next year, so I'll be wanting 3.27's or something around there for that. Is it the same width as the SN95 do you know?
  15. Trboh22

    Just picked up my next Project!

    Thats good, I'm gonna call around and see what I can find locally, if anything.
  16. Trboh22

    rear end help

    Is the width of the SN95 rears the same as a fox for a direct swap?
  17. Trboh22

    Doing 5.0 swap in the Fox

    Ahhh, lol thanks
  18. Trboh22

    Help identifying Engine and picking cam

    Well I went and picked up my new hooptie finally. It was cheap enough I didn't really care that it did not have an H.O. motor in it. I think it's from a crown vic, but I'm not sure and I would hate to find out it's out of a truck lol. Anyways on the valve cover there is a sticker with 1K336AA...
  19. Trboh22

    Doing 5.0 swap in the Fox

    You will need to swap over the Wiring Harness from whatever motor you plan on using...so If you plan on using the 87 motor, but get the mass air out of a 89-93 car, you would want to use the 89-93 wiring...if you use the 87 motor and keep speed density, then you will need the wiring harness out...
  20. Trboh22

    Boat People

    I relly would like another boat, the only problem is instead of a $3000.00 investment, it turns into a $6000.00 investment just to get it to the the lake lol....the later number figuring in a pickup or SUV to haul it of course....
Top Bottom
Back
Forums
Menu