Search results

  1. Chern_889

    Official Adam95gt Pictorial Progress of Swap / Clean Up

    cant wait to see a vid of this thing tearin it up! Too bad you smashed the ***** outta those headers! ah well, plans change Jay
  2. Chern_889

    On 3 Performance Turbo Kits

    They have a 2v kit for 96-98 cars, so im sure Chad at On3 would be more than willing to package a cold side from a 2v kit with a fox 351 hotside, from what ive seen on the other forum, he has wicked customer service, and goes that extra mile to make guys happy, call him up!:nice: BTW, i am...
  3. Chern_889

    On 3 Performance Turbo Kits

    Ive read that the fox kit fits pretty good if your running a fox style throttle body, with very minimal issues. So im thinkin that the 351 kit would be your best bet, and switch to a fox style TB (if your not already) or modify the charge tube to fit the SN TB, which im thinkin would be a hell...
  4. Chern_889

    WIDE TIRES....Is there a SAFE way to run wheel spacers???

    I run it for the looks, when i put the cobras on, you could cleary see the front wheel face sticking out further than the rear, looked like serious ass, so i put the spacers on asap
  5. Chern_889

    installing 30# injectors over lunch

    Power lineman?
  6. Chern_889

    On 3 Performance Turbo Kits

    They are VERY popular over on the "other board" (C-O-R-A-L), they have a huge discussion thread in the turbo section, where the owner of on 3 chimes in almost daily. Ive only heard good about them, ive got my name on a 94-95 kit when it is released.
  7. Chern_889

    WIDE TIRES....Is there a SAFE way to run wheel spacers???

    Im running an H&R 1inch spacer, with 275 BGF sport tires, on a 17x9 rim, and if i bottom out or even close to it, the lip on the outer fender cuts into the tire, bad enough that it concerns me, i am going to have to get the lips rolled this spring. I have no idea how you plan to stick a 345 in...
  8. Chern_889

    Official Adam95gt Pictorial Progress of Swap / Clean Up

    Weld it, and hit it with the polishing wheel and buff the **** out of it, or clean it up and give it a once over with a wire wheel for that brushed look, or just black haha. And good plan with chris cutting, someone to blame when it goes bad:nice:
  9. Chern_889

    Official Adam95gt Pictorial Progress of Swap / Clean Up

    Cut it! haha, its gotta be tough makin that decision, cut a big hole into all the hard work you did, or just leave it, I say cut, would look sweet, especially if you hide the MAF in the fender.
  10. Chern_889

    Official Adam95gt Pictorial Progress of Swap / Clean Up

    any recent news? hows school going?
  11. Chern_889

    Gt40P headers???

    I bought from Summit bacause they have them in stock, and M-9430-P50 is the part # for the above picture, im not 100% on this but i think M-9430-C50 doesnt fit the P heads, but i could be wrong Un-coated Ford Racing M-9430-P50 - Ford Racing Hi-Flow Shorty Headers - Overview - SummitRacing.com...
  12. Chern_889

    94-95 Mustang GT parts... parting two cars...OHIO

    how about fog light brackets, just need the u-shaped peice, with the bolts, i included a pic
  13. Chern_889

    Question about wheel spacers

    H&R 1-inch is what i run, pull off wheel, bolt on spacer with supplied hardware, put on wheel. Easy to install,very quality, and change the stance of the car for the better:nice:
  14. Chern_889

    How about a "What should I know about 94-95 5.0" thread?

    Im having that problem right now, whats the fix?
  15. Chern_889

    How about a "What should I know about 94-95 5.0" thread?

    Stole the words out of my mouth, i suffered the exact same thing, its 10x worse when a K&N filter is used. It should be a regular maintenance check. The wires from the brake light switch rubbing through on a braket under the dash had me a on wild turkey chase, from what ive read its quite...
  16. Chern_889

    Question about wheel spacers

    +1 Ive ran mine for 4 years, zero problems
  17. Chern_889

    Official Adam95gt Pictorial Progress of Swap / Clean Up

    connects on the same harness as the dizzy/injectors that runs down the front of the block, its the low oil level light, and 02 sensors
  18. Chern_889

    King Cobra Clutch kit: Heavy Pedal?

    mine feels great, it was pretty stiff when i first installed it, a newcable/FWA made a huge difference, as my cable was ratched
  19. Chern_889

    Intake Vac Line Questions Need HELP FOR THE AM!

    nice pics, i would just ditch that whole rubber connector rubber thing for the EGR, mine leaked really bad
  20. Chern_889

    Spark Plugs- Swapping to GT40P heads

    I used plugs made for the explorer, dont know the # off by heart, but they do spark
Top Bottom
Back
Forums
Menu