Search results

  1. J

    Problem turning/depressing rear caliper

    Thanks Ogre... I will certainly go rent this tool. I'll post afterwards to let everyone know how it goes. J
  2. J

    Problem turning/depressing rear caliper

    I have the cube tool for my rear calipers; however none of the protrusions fit my piston so I had to grind one side to get two of the pieces to fit. I have that resolved now, but I am still having a big problem getting it to turn. The manual says to turn the piston clockwise but it isn't budging...
  3. J

    Humming coming from under the hood

    Thanks for the replies. I should also mention that it only does this humming once the engine is warm. I will look into the idle air control and the plenum. I don't believe it'd be the power steering pump, as there's no change in the sound when the wheel is turned. I'll repost once I can...
  4. J

    Humming coming from under the hood

    Found an old posting from a few years ago by a board member but never received a response back from him so I thought I'd repost it because it is the IDENTICAL situation I am having. From what i can tell it only happens when i first start the car after it has been sitting for a while. i start...
  5. J

    How To: Change Your Cluster to Blue L.E.D.s/Incandescent bulbs for $8

    Well that sucks! :D I'll keep trouble-shooting it because now I'm just pissed and I'm gonna make this happen! :nice:
  6. J

    How To: Change Your Cluster to Blue L.E.D.s/Incandescent bulbs for $8

    Hey AmBo... I have those exact Tri-LEDs and the HVAC bulbs (got the HVAC ones from PepBoys) but my cluster and HVAC does not light up at all with the LEDs installed in there. There's no blue coming out from the gauges at all (in fact, still a VERY faint green) but I'm fairly certain that all...
  7. J

    mach 460 removal

    That would make sense. So if I would get new rear speakers it'd be best to remove the factory Mach amps as well. Would I have to rewire from the receiver back to the rear speaker area as well? Thanks for the input 2BADSTANGS!
  8. J

    Looking for a Good EQ Balance w/Pioneer FH-P8000BT

    Thanks for the input 2BADSTANGS. I'll give that a try. Maybe not with Mellencamp but we'll see. :-P
  9. J

    instrument Cluster Lights

    Unfortunately yes... It was one fuse I overlooked. There was a fuse for "adjustable illumination" that I'd overlooked. Thanks again!
  10. J

    Help. Instrument Cluster and A/C lights not working

    Okay... so I figured out what my problem was. After many many hours I noticed that I had connected the wrong wire from my new receiver. I had an "illumination" wire coming from the receiver that I connected to BOTH the illumination wire from my car AS WELL AS the illumination dimmer wire...
  11. J

    instrument Cluster Lights

    Okay... so I figured out what my problem was. After many many hours I noticed that I had connected the wrong wire from my new receiver. I had an "illumination" wire coming from the receiver that I connected to BOTH the illumination wire from my car AS WELL AS the illumination dimmer wire...
  12. J

    instrument Cluster Lights

    ... more info So I figured I'd give the complete run-down of the problem in my '03 Mustang. My instrument cluster lights won't come on when I turn on my lights. I can move the switch to turn the interior top lamp on but I still get nothing out of the instrument cluster. The headlights work, and...
  13. J

    instrument Cluster Lights

    Where is that fuse box? I have an '03 Mustang and neither the interior fuse box (under the steering column) nor the power distribution box (under the hood) look like the diagram from your link above. Thanks! Jared
  14. J

    Help. Instrument Cluster and A/C lights not working

    Hey Josh, Did you ever get an answer to this? I am having the exact same problem right now with my instrument cluster and A/C lights. All fuses are fine but cluster lights and A/C lights aren't working. Thanks! Jared
  15. J

    instrument Cluster Lights

    Where is the dimmer fuse?
  16. J

    instrument Cluster Lights

    I am having this very same problem and would love to know how to fix it too! :-)
  17. J

    mach 460 removal

    Could you just replace/upgrade the rear speakers if you plan to keep the two amps already installed in the Mach 460 system? I have already installed a new receiver (Pioneer FH-P8000BT) with the harnesses and it works wonderfully. If I decide to upgrade to some different speakers in the rear...
  18. J

    Looking for a Good EQ Balance w/Pioneer FH-P8000BT

    I just bought a Pioneer FH-P8000BT receiver and installed it in my 2003 Mustang. I have the MACH 460 audio system in my mustang, with everything still original with the exception of the new Pioneer receiver. I'm having a little issue trying to fine tune the equalizer to make the sounds more...
  19. J

    New radio installed... FH-P8000BT

    Looking for a Good EQ Balance w/Pioneer FH-P8000BT I just bought a Pioneer FH-P8000BT receiver and installed it in my 2003 Mustang. I have the MACH audio system in my 'stang, with everything still original with the exception of the new Pioneer receiver. I'm having a little issue trying to...
Top Bottom
Back
Forums
Menu