Search results

  1. mrmustangman357

    Front Coil Over and 60’ times – 65 Mustang

    a foot of front end rise is pretty decent for a stock suspension car. is your swaybar removed and are you getting traction? it sounds like you have enough front end lift to not really need coilovers, and your drivetrain setup needs to be inspected if you are looking for lower times. without a...
  2. mrmustangman357

    carburetor question

    for the street a 650 holley or edelbrock would work great. like advised earlier, change the spring in the vacuum secondary on the holley to a lighter one since you are running a stick. a mechanical secondary 650 may give good power but has a chance of suffering fuel mileage
  3. mrmustangman357

    Lifter noise

    pull the stuff and check before any damage propagates into the motor
  4. mrmustangman357

    Front Coil Over and 60’ times – 65 Mustang

    what is your 60 foot so far, and what are you running for rear suspension/tires?
  5. mrmustangman357

    Help with K-Code Compression Test Results

    does the oil look chocolatey? maybe you could have blown a head gasket, or the rings need to be done in the motor and/or valves. its interesting you got low readings on cylinders next to one another. do you have access to a leakdown gauge? That can better point you to where the leakage is...
  6. mrmustangman357

    Lifter noise

    readjust the lifter and see. if it persists then you will need to pull the intake and pull the lifters to inspect
  7. mrmustangman357

    Wow, it has been a long time!

    still doing ported cobra intakes? If you can supply some data on gains that would be great
  8. mrmustangman357

    carburetor question

    more info needed? cam, stick/auto/ rear gears, car weight, street/strip? how can you expect a intelligent response without any useful info given?
  9. mrmustangman357

    (I think) Timing chain issue... might explain dyno/starting/timing issues..

    if you still think its a timing chain issue or slack in the valvetrain, do what dhearne says and use a breaker bar on the balancer to rock the engine side to side and observe the movement of the distributor rotor. If its tight, you need to check your total ignition timing, since idle timing...
  10. mrmustangman357

    Anyone get their new HotRod mag yet?

    at least hot rod called them out on their "intercooler" setup
  11. mrmustangman357

    (I think) Timing chain issue... might explain dyno/starting/timing issues..

    check with the breaker bar like dhearne suggests. it will tell you if your timing chain is loose or messed up. Also you can pull the dizzy and check the gear to see if its chewed up? Is your dizzy gear material compatable with the cam thats in it? does it spin freely? whats the backlash of the...
  12. mrmustangman357

    Anyone with underdash pics of 65-66? MSD box routing

    actually its a mallory hyfire 6AL, just like the MSD 6AL. it even has the same wiring connectors and wire colors, but its an all digital box inside.
  13. mrmustangman357

    Starts, Runs, THEFT Code Continually Blinks

    when i reprogram my computer with my diablosport predator, it blinks the THEFT sometimes. It sets a soft code which if you clear it goes away
  14. mrmustangman357

    Anyone with underdash pics of 65-66? MSD box routing

    I'm looking to mount my MSD box inside the car in my 66 coupe. I have lots of space underdash since i yanked the heater and the car doesnt have a/c. However, I may choose to install it later on. Do you guys have any pics under dash of your setups, with a/c and heaters installed? Also, what...
  15. mrmustangman357

    getting closer.....

    oh yeah btw, I checked out your website and your welding skills look B.A.! ! ! Do you have any more pics from mustang jobs P.S. is that a mod motor or an LS motor? I can't tell.
  16. mrmustangman357

    getting closer.....

    is that a pro/e model? what are your numbers for torsional rigidity out of curiousity?
  17. mrmustangman357

    CPRstreetmachines 1969 Turbo'd Pro-Touring GT2 build

    mmk never mind one of the flash advertisements at the bottom was blacking out over one of the pics. goofy lol
  18. mrmustangman357

    CPRstreetmachines 1969 Turbo'd Pro-Touring GT2 build

    wats with the censoring?
  19. mrmustangman357

    Rear suspension - Performance leaf springs

    global west 5 leaf with reverse eye L-10R ordered through summit, $261 shipped thanks to my discount code and some cannodling with the sales rep. I might hold off on the shocks for now since the economy is in the rut and I'm unemployed.
View older results
Top Bottom
Back
Forums
Menu