Search results

  1. 2k2fourpointsix

    Anyone in Northern CT got some spare time?

    First of I would drain and re-fill the tranny with some synthetic ATF again to get rid of the residual Gear oil. And as far as running like crap after a tune up, I would first double check the firing order to make sure they dont have a few wires mismatched. If that looks good, I would have a...
  2. 2k2fourpointsix

    Exhaust fitment issues

    Mind did the same thing, after a spending some time adjusting it, i got it to fit perfectly now. Try adjusting the angle on the pipes that goes from the H pipe to the muffler. Thats where mine was off.
  3. 2k2fourpointsix

    Exhaust fitment issues

    No welding necessary but ditch the clamps that come with the kit they break way to easy, especially if you have to tighten and re-adjust the system a few times and most likely you will have to in order to get it to fit right. Get some good HD clamps from autozone. I had some clearance issues...
  4. 2k2fourpointsix

    Went to the track tonight. . . .

    Your trap speed is way low, 90mph? Stock your car should be trapping mid 90's I think your car is having issues, and traction is not a major problem a 2.2 60' on drag radials is not that bad. Your losing power somewhere down the track and that would account for you low trap speed.
  5. 2k2fourpointsix

    mach 1 hood

    try www.gefracing.com I agree the cdc kit looks like crap with the black plastic overlay. I would rather have the stock mach1 shaker and hood.
  6. 2k2fourpointsix

    Aftermarket Decals.........Durable???

    I dont get why you would use soapy water with stickers? How do you expect them to adhere to soapy, wet paint?
  7. 2k2fourpointsix

    Honeycomb rear panel install ?

    There was a tab on the pass side panel, but it corresponded to the hole in trunk panel from where the Ford emblem was removed from. I left it on there.
  8. 2k2fourpointsix

    Aluminum Racing Jack

    Craftsman makes one, ive seen it advertised at Sears.
  9. 2k2fourpointsix

    The Official Diet thread: Losing weight in your street Mustang

    I don't know why you swapped out the IRS for a solid rear when you are building a road course car. The handling benefits of IRS far outweigh any weight savings over a solid rear. On a drag car I understand but for road racing?
  10. 2k2fourpointsix

    My new painted interior with Carbon Fiber!!!

    Not a fan of the dash only b/c you have too many colors going on there. You have the red and the CF and then you have the silver and then the orange needles on the guages. But, the doors look ok. The dash just has too much going on.
  11. 2k2fourpointsix

    Knock from undercarriang upon start up...

    do a search on here, someone recently posted on here the same prob. and that it is the a/c condenser bottle banging against the firewall. they fixed it with a simple piece of foam/rubber. p.s damn, nice jeep
  12. 2k2fourpointsix

    Dent : Can it be popped out?

    PDR guys can work wonders, a good shop/guy will fix that no problem. Ive seen them fix worse. Its definitly worth a shot, there might be a slight risk of the paint chipping where the metal is creased but go to a good reputable shop.
  13. 2k2fourpointsix

    tree sap on paint...

    bug and tar remover works, but also strips the wax off so be careful wehre you spray it and how much you use and re-wax the area when done. Supposedly clar bar works well with that too, but ive never tried it.
  14. 2k2fourpointsix

    Will our cars be a "collector car" anytime down the road?

    New mustang will never have the value of a classic from the 60's and 70's for the simple reason that they make to many of them. If you have a clean low mileage 2002 stang in 10-20 years it will be worth alot more than blue book value at the time, but it won't reasch collector car status like an...
  15. 2k2fourpointsix

    alignment prob? or tires or brakes??? HELP

    How much do you weigh? Next time you have your car aligned sit in the drivers seat while on the machine, the weight of the driver can throw off the alignment in some cars.
  16. 2k2fourpointsix

    3rd Brake Light -- Decklid light

    save yourself some money and check out this article on restoring at www.bullittarchive.com
  17. 2k2fourpointsix

    SERIOUS HELP

    Ive seen a dozen or so threads like this one, bring it to a good mechanic and they will be able to fix it for you, but it won't be cheap. Try searching on here for what others did to get it out.
  18. 2k2fourpointsix

    throwout bearing question

    Id be careful spraying the grease into the bellhousing. You don't want to get it on the clutch plate or you will have a whole new problem with chattering/slipping clutches.
  19. 2k2fourpointsix

    Look at the junk I found in my tailpipes?

    Magnaflow uses what they call a "rock wool" material made of lava for their sound deadening. They have an article on the website. I would contact them
  20. 2k2fourpointsix

    Look at the junk I found in my tailpipes?

    Your sig says you have a magnaflow, PM the magnaflow rep on here and ask him if its possibly the material they use in the mufflers. I can't remember his member name, but you can search for him.
Top Bottom
Back
Forums
Menu