Search results

  1. MustangPunk302

    Another AOD-T5 question

    I did the swap for about a $1,550... Most expensive was the rebuilt t-5... I bought many new parts from Ford too...
  2. MustangPunk302

    How do i get the Ford hood emblim off the front of my 93 lx?

    Maybe someone took the bolts off and put a emblem that doesnt have bolts in?? I never noticed to holes in the cover though..
  3. MustangPunk302

    How do i get the Ford hood emblim off the front of my 93 lx?

    My 91 LX Vert didn't have bolts... :shrug:
  4. MustangPunk302

    How do i get the Ford hood emblim off the front of my 93 lx?

    I heated it up and picked it out with a Awl... :P It worked...
  5. MustangPunk302

    quads or not

    If you have a set of good UCA's and LCA's you shouldn't need quads... Though some people do run into wheel hop anyway, I had stock uppers and lowers w/ no quads for a long time and no wheel hop issuse's.. I say take them off but dont throw them away just incase...
  6. MustangPunk302

    Reduce Underhood Temp....Help!

    Yup, it can trap the moistrue in and rot the headers. It can... Some wraps say they breathre lol.. Let the heat out to then don't they.. :p
  7. MustangPunk302

    Heads on a 84GT

    Will my stock headers off my 91 5.0 bolt up to the 84 heads??? I know it won't bolt right up to the exhaust, but just need to know if it'll to the heads.. Thanks.
  8. MustangPunk302

    v6 stangs

    Well if it wasn't for base model Mustangs and all there sales it's very likely the Mustang wouldn't be around at the moment..
  9. MustangPunk302

    does anyone make 33-spline posi?

    I'm positive Aburn, Eaton and such makes 33 spline units... :nice:
  10. MustangPunk302

    stock(?) h-pipe removal..help

    I sprayed some wd-40 in the rubber isolators on the hanger and pounded the hanger out with a mallet... Slipped right out. I then installed the aftermarket offroad h-pipe with out the air tube and hangers hooked... I cut both off, some people recommend the hangers works fine for me with out them...
  11. MustangPunk302

    2 Alum. D/S left!!!!

    Yeah, if he's got the stocker d/s on.... GOOD FRICKING LUCK getting them bolts lose in 10 mins!!.. Enough Said.. ****, yeah there's alot of stuff I could do, but sometimes it's just easier to have someone else do it. Also like he said, he just should have it done while the mechanic is under...
  12. MustangPunk302

    What to do w/ empty fog light holes???

    You COULD.... :p Dunno how it'd look... All LX's have the fog light connecteions already in the harness too :nice:
  13. MustangPunk302

    Stock '90 flywheel - 28 or 50oz.? And how many teeth?

    157 tooth, 50 oz :nice:
  14. MustangPunk302

    how to determine compression?

    http://bbs.hardcore50.com/calc/?mode=enginecompratio Have fun :p :D
  15. MustangPunk302

    Hesitation at 3K Rpm, but kicks like crazy afterwords?

    Gears..... Oh wait you already got 4.10's!! :p... Did this hesitation only happen after the LT install??
  16. MustangPunk302

    Stock Driveshaft Went Through My Floor!!

    Actually, I don't know if I still have it.. My dad may have thrown it out haha...
  17. MustangPunk302

    Stock Driveshaft Went Through My Floor!!

    The shaft is bent, I don't know if you can see it in the last pic. The joint wasn't probably in the best of shape, but had no sign of total failure like it did. That's what 5 grand nitrous lauch on slicks can turn out... On my old Gt-40 combo.
  18. MustangPunk302

    Stock Driveshaft Went Through My Floor!!

    This could happen??? Yes, that's steel :D I didn't have a driveshaft loop at the time either and it didn't go through the floor, thank god.. Only because it happened at lanuch...
  19. MustangPunk302

    what the best block

    Sorry to totally off topic.... But the '03-'04 Cobra motors are just so ****ing amazing.... Lemme digress.. X2C Motorsports LLC has created a kit: They claim 872rwhp on a stock block/internals...??!!!
  20. MustangPunk302

    If I autocross my stock 89 Convt will I break it?

    You can break anything if you drive it hard enough....
Top Bottom
Back
Forums
Menu