Search results

  1. G

    Will a T5 from a 99-01 V6 Mustang fit a 90 302 engine?

    Thanks guys... The quote below is taken from moderndriveline.com, looks like the V6 Stangs do use a T5... "Today's V-6 Mustangs sports the last of the T-5s. The T-5 behind the 3.8L is a 3.35 first gear set with a .68 over drive. What makes these different from the rest is the electronic...
  2. G

    How to take off TB and EGR spacer?

    By the way, once you get the studs out you will probably want to chase the threads with the proper tap just to be sure they are clean.
  3. G

    How to take off TB and EGR spacer?

    I just went through this a couple days ago, GIANT pain to remove. I don't know if this is the best way but this is what I did.... Try to get the studs out, it will make this much easier. You can back two nuts onto eachother on the stud then try and back them out one at a time. Use lots of...
  4. G

    Will a T5 from a 99-01 V6 Mustang fit a 90 302 engine?

    Will the T5 from a 99-2001 V6 Mustang bolt up to a 1990 Mustang 302 with stock flywheel, clutch, bellhousing, etc..? The person selling it says the only change it needs to fit is a different input shaft. Is this correct? Also this trans has an electronic speedo output can connect any brand...
  5. G

    Which T5 transmissions will work on 1990 302?

    Thanks David, The trans from the V6 I am looking at has the following ID 1352-260. This ID on the T5 ID chart says: 1999-2001 Mustang 6cyl elec speedo WC The person selling it says that they changed the input shaft to allow it to be used on 90-91 Mustang 5.0 with stock bellhousing...
  6. G

    Which T5 transmissions will work on 1990 302?

    Mario, Thanks for your reply. I found a T5 from a 99-01 V6 Mustang the seller claims that they changed it to the proper input shaft for use on 1990-1991 Mustang V8. Does this make sense? Can I use a T5 from 1999-2001 Mustang V6 just by changing the input shaft? Will it bolt up to my stock...
  7. G

    Which T5 transmissions will work on 1990 302?

    Will a T5 transmission from a 1999-2001 V6 Stang work on 1990 302? I need a transmission for my 1990 302 engine. Will the T5 from any other fords fit? For example can I use a T5 from a newer stang? If so what years? Or does it have to be a 87-93 T5 from a Mustang only? Thanks for any guidance.
  8. G

    Any Engine rebuilders in South Florida?

    Hi Folks, This is my first post :) Not sure if this is where I should ask this question but... I am in Miami, FL and need to get my 302 longblock re-built (its from a 91 Stang). I have already stripped it down to the longblock. Now I need an engine rebuilder in the area. Basically I am...
View older results
Top Bottom
Back
Forums
Menu