Search results

  1. RaSMG

    Autometer Electric Speedometer ?

    i have the electric speedo waiting to go in mine, i opted for the adjustability of the electric even though it's a little more $. you just push a button on the gauge to calibrate it, drive exactly two miles if you have a marked road or exit ramps and push the button again. also, you have to...
  2. RaSMG

    '65-'66 with 16x8 wheels - tire size question

    I run 16" rims on my 66, the fronts will require some minor clearancing just to fit the rims. this has to do with the positioning of the upper control arm inside the wheel, a 15" or smaller rim will clear inside the control arm and spindle and a 17" or larger rim will clear outside the control...
  3. RaSMG

    Lakewood Scattershield Questions

    or get a McLeod with preindexed runout, won't have to worry about offset dowels .. and they clear my hooker super comps.
  4. RaSMG

    need help finding-small heim joint for throttle....

    http://www.fordmuscle.com/archives/2004/08/ThrottleLinkage/index.php
  5. RaSMG

    Anyone using the FMS steel blowproof bellhousing?

    The TKO uses the larger 1/2" holes and you will have to drill them bigger. As for the bolts, I was going to use the ones McLeod sent but decided to find better bolts at the hardware store. If you look at any other OEM or aftermarket transmission bolts, they have an unthreaded sleeve up by the...
  6. RaSMG

    I'll build the header chart.......catagories?????

    How about the more performance oriented things like tube length or style(equal length/tuned, unequal length, blockhugger, tri-y, long tube, shorties, etc), the primary tube diameter(1+1/2", 1+5/8", or 1+3/4") and the collector size/style(3" collector/flange, etc).
  7. RaSMG

    Would you recommend Mac Prochamber? (I searched)

    Not to hijack but I'm interested in the ProChamber too but can't find anywhere that sells it? I don't need a full cat-back system with the piping and everything, I just need the midpipe chamber section to put into my current exhaust. Do they sell just those sections or can I get one and if so...
  8. RaSMG

    got the stang dyno'd! VID!

    12sec67, those are good numbers! You could probably get more out of it with a little less fuel, most n/a sbf's usually put down the best numbers and the flattest curves if you can get em at a constant 13.2 ish, almost always between 13 and 13.5 though depending on your combustion combination...
  9. RaSMG

    Short vid of one slow 65 mustang

    cool vid! i love how those rims look while spinning at medium speeds, they almost look like they're floating.
  10. RaSMG

    MSD or CRANE ignition????

    the crane hi-6 series is fully digital, surface mounted, weatherproof, just overall better quality. look at the crane website for more info and pics comparing the two. not to mention that the crane setup with thir lx-92 coil supposedly produces twice as much spark as the msd setup and coil. i...
  11. RaSMG

    where to buy heads?

    i hear the afr's, especially the 185s and above are often backordered 4-6 weeks .. if you're not in a hurry go with the cheapest place you can find. if so, try some of the larger retailers that stock inventory instead of just drop shipping, i hear ed curtis at fti stocks afrs all the time as...
  12. RaSMG

    need to know how to wide I can go in the back?

    you can get 9" of tread, approximately 10.5" of sidewall "bulge" width under the rolled fenders of a 65/66 with an 8" wide rim backspaced 4.5". whether you want to run 255mm street tires, 10.5" street slicks or 9" slicks, they're all basically the same width, check the tire manufacturer for...
  13. RaSMG

    N-E-1 ever see a 'quality' flat black paint job?

    jesse james roadster in the autozone commercial is flat black, looks nice. also there's a nice flat black paintjob i saw in a music video on mtv. it was the outkast 'roses' video, it's flat black with pinstriping looks real neat.
  14. RaSMG

    Who is using Recaros/Corbeaus/etc?

    I've got Corbeau A4's from Streetortrack and a 4 point harness. The seat you choose should be based on the recommended waist width, they have wide options available on some models. I got some that are just right for my body, probably should've gotten the wide version for the passenger because...
  15. RaSMG

    What is a good heat insulating mat for floorboards?

    i had 2 rolls of that brown bread stuff ready for my interior and chassis restoration. i since found out about this .. http://www.quietcar.net/ i have a 5 gallone bucket of the stuff waiting to be applied, probably 2-3 coats on every piece of metal between the interior firewall and the trunk...
  16. RaSMG

    driveshaft loop

    I got one of the Summit brand 'generic' driveshaft loops. It installed very easily, I didn't have to drill all the way through the floors. I got one of those weird angled wrenches for adjusting the timing on those crazy chevy engines with the distributor in the back. Anyways, it's an odd...
  17. RaSMG

    My engine bay detailing pics

    if you sign up and create a webpage on www.cardomain.com they provide free infinite pic hosting, remote linking, and they automatically resize your pics to make it bandwidth friendly. best of all its free and they have rankings and template options if you decide to make fill in information...
  18. RaSMG

    Largest tires possible for my 66?

    I did .. that's me saying his car is ugly, and for good reason I thought. OK so maybe I went a little hard on him but didn't I offer more reliable technical information that anyone else in this thread? I know from experience, and I answered the question of the thread realistically and from...
  19. RaSMG

    Largest tires possible for my 66?

    Not to mention that it wouldn't hook for *****, the car looked hideous. If that's what yo're going for, then you hit the nail on the head. Wide tires doesnt mean it will hook, and if youre going to have tires that stick that far out the fender, why not put some good tires on it? Tire compound...
  20. RaSMG

    Tuning an Edelbrock?

    I'm not sure if you get what I'm saying .. sure the Holley didn't 'bolt on' and go like hell, that's the whole idea. Holleys require tuning, they require you to know about carbs, to know what you're doing, to know what will work better, and to know how to change it. Accelerator pumps, cams...
Top Bottom
Back
Forums
Menu