Search results

  1. dhsmustang

    Can I run this plug?

    OK so I went up to Summit today and tried to pick up some TR6 plugs for my procharged 2002 GT, but the guy who helped me said they quit making them? I knew that this didn't sound right, but he gave me the plug that "replaced" them. It's an NGK V-Power like the TR6, but the heat range is 9...
  2. dhsmustang

    Boost Gauge Setup

    I'm wanting to see pics of how you have your boost gauges set up. I'm having a hard time deciding what I want. What gauges look closest to factory in 99-04 GTs?
  3. dhsmustang

    Roush Just ran an '07 Corvette...

    mat, what kind of power does your car put down?
  4. dhsmustang

    Roush What kind HP/Tq should I expect?

    I just bought a Saleen series II supercharger with 70MM Throttle Body, Saleen Series IV Intake Plenum Elbow, Chicane upgraded pulley (8 Pounds boost), Ford Racing 42 lb. Fuel Injectors, and a Ford Racing Lightning 90MM mass air flow meter. What kind of HP/Tq number should I expect?
  5. dhsmustang

    Caster camper kit needed? (Pics inside)

    went ahead and bought them..now what about shocks and struts? What should I go with?
  6. dhsmustang

    Caster camper kit needed? (Pics inside)

    Just lowered my car with Steeda sports springs. Before I take it to get aligned should I get the Maximum motorsports caster camber kit? I'm not sure if it can be aligned without it or not :shrug:
  7. dhsmustang

    My first blower

    you know after thinking about it you're right. I think I could just do some other minor things right now instead of supercharging it. Although it may not seem like it from these questions, I'm a pretty capable mechanic. Just don't know anything about superchargers.. any suggestions as to what...
  8. dhsmustang

    My first blower

    is this something that i can do with a tuner by myself bc there are no dynos around my place
  9. dhsmustang

    My first blower

    yeah I've decided to go with a paxton. if i keep the boost low will i need a tune?
  10. dhsmustang

    My first blower

    i know no one likes the powerdynes but i think i am gonna go with it. i only want to make around 6-7 pounds of boost. i dont need huge numbers. how much power will these net me?
  11. dhsmustang

    My first blower

    I'm finally seriously looking into getting my first supercharger but I am looking into getting the cheapest possible setup since I will be paying for college next year. I'm also a little leary of tapping the oil pan..so I am considering a Powerdyne BD600. I know not a whole lot of people have...
  12. dhsmustang

    18x9 Rears?

    I am getting a set of Chrome 03 Cobra replicas but I can't choose between 18x9 or 18x10.5 rears. What would you guys do? Got any pics? Thanks! BTW, if I got 18x9 would I need a wheel spacer to set the tire even with the fender? :shrug:
  13. dhsmustang

    18x10 DD Bullitts

    Just sold my stock 17" Bullitts from my 02' GT to upgrade to 18x9 front & 18x10 DD rear Bullitts from American Muscle. I'm gonna get some 275/40/18s for the front and throw 315/35/18s on the rear. Are they going to rub at all Also what are your thoughts on the 18" Bullitts. Anyone like...
  14. dhsmustang

    18" Bullitts?

    Just sold my stock 17" Bullitts from my 02' GT to upgrade to 18x9 front & 18x10 DD rear Bullitts from American Muscle. I'm gonna get some 275/40/18s for the front and throw 315/35/18s on the rear. Are they going to rub at all Also what are your thoughts on the 18" Bullitts. Anyone like...
  15. dhsmustang

    2002 Mustang GT Cobra Engine Swap

    Negative on the Cobra engine. However, I found a 2003 4.6 32 valve Marauder with 18,228 miles for $2,695. What do you think? My thinking is that in the end it will be cheaper to get a 4V than to build up my 2V to the same specs that I could achieve with a 4V engine. I just want more HP...
  16. dhsmustang

    Mufflers or Cat-back

    I would definitely say go ahead and get the whole cat-back. I was in the same boat as you a few weeks ago. I couldn't decide if I wanted to buy just the mufflers and weld them in myself or go ahead and get the cat-back. I decided to go with the cat-back to save myself time and frustration. Its...
  17. dhsmustang

    2002 Mustang GT Cobra Engine Swap

    The overall consensus seems to be to not spend the money. Would I be better off putting that $1,600 towards a supercharger? What's the best deal on those?
  18. dhsmustang

    2002 Mustang GT Cobra Engine Swap

    First of all I found a 1999 Cobra engine with 75K for $1600. Is that a good deal? If I were to buy it, what else would I have to get in order to swap that engine into my 2002 GT 5 speed. Is that even a good idea?:shrug:
  19. dhsmustang

    Best exhaust system for my 02 GT?

    I have had my 2002 GT for about 3 months now, and it is time to make it louder! But with so many choices, I don't know what I want to do. I want that deep, signature Mustang rumble but I don't want it to be too loud. I am leaning towards 40 Series Delta Flows (2 Chamber) with factory H-pipe, but...
  20. dhsmustang

    Dents

    How many dents have you put in your Mustang? I just did my first today, in a rather unfortunate way. I was washing it and slipped in the grass and my arm struck the right front fender, putting a small but noticable dent in it. :nonono: :mad: :( Now i am sick to my stomach
Top Bottom
Back
Forums
Menu