Search results

  1. F

    A/C clutch replacement

    I believe that is from a 94-95 SN95 Mustang. For $100 its not a bad deal at all. I could roll the dice with the stock parts and then use the LMR kit if ever needed.
  2. F

    A/C clutch replacement

    I am in the process of getting my compressor replaced but also considering replacing the clutch and stator. Would you guys think its really worth doing so on a 62k mile car? The original parts are working well but the availability is drying up. What to do?
  3. F

    Engine Foxbody Mustang A/C Compressor Reseal - Nippon-Denso 6P148A

    I am trying to tackle down the correct Motorcraft replacement part # for the Denso 6P. YC-??
  4. F

    Engine Foxbody Mustang A/C Compressor Reseal - Nippon-Denso 6P148A

    I guess that's what I was looking for. The condensor is the real driver here to either convert over or stick with R12. Everything on my car is original. I keep looking on Ebay for a 6P compressor and I come across some that look very similar but not exactly what I have, even when I use those...
  5. F

    Engine Foxbody Mustang A/C Compressor Reseal - Nippon-Denso 6P148A

    I've been hunting around the internet, trying to figure out what to do with my A/C. 12 years ago I had a shop evacuate the Freeze 12 and and refill it with actual R12 and 4 oz of "refrigerant oil" (not sure which kind). This time, it's leaking from the front seal (evident by the dirt around...
  6. F

    Engine Foxbody Mustang A/C Compressor Reseal - Nippon-Denso 6P148A

    Is this one of the part #'s? F33H-19D623-AA
  7. F

    Engine Foxbody Mustang A/C Compressor Reseal - Nippon-Denso 6P148A

    Here it is...
  8. F

    Engine Foxbody Mustang A/C Compressor Reseal - Nippon-Denso 6P148A

    Anyone happen to have the OEM part # for the compressor? Is the Motorcraft # any different? I am getting conflicting numbers online and the replacement parts claim fitment for a (ex. 1991 Mustang GT) fox but the manifold ports are clearly different.
  9. F

    Engine Coolant Hoses?

    It has it's own solid upper hose/pipe. Basically you have to cut up an upper hose to get your connections sorted out.
  10. F

    Engine Coolant Hoses?

    After 29 years and 61k miles, I believe its time to replace the coolant hoses on my fox. What I am not sure is do I stick with a typical Gates/Motorcraft replacement or spring for the silicone hoses? I believe the FMS hose kit and Goodyear Hi-Miller hoses are NLA. I do see both SVE and...
  11. F

    Shepherd Aluminum 3 Row Radiator

    Can you please post a link to the radiator? Sent from my SM-N920P using Tapatalk
  12. F

    Expired Zeitronix Wideband Meter And Innovate Lma-3 Data Acquisition Box

    The Zeitronix has been sold
  13. F

    Blown Guys- Which Radiator You Running?

    You should be able to get Champion to replace it Sent from my SM-N920P using Tapatalk
  14. F

    Blown Guys- Which Radiator You Running?

    @mikestang63 - I am assuming those temperatures were with the A/C running?
  15. F

    Blown Guys- Which Radiator You Running?

    Nice car! I run a 4" cowl so hopefully that is helping a bit. I am at a cross roads where I can modify the stock shroud (e fans wont fit w/ this rad) and keep this thicker radiator of mine OR try to get Champion to exchange it for a 2 row model where the stock and any future electric fan will...
  16. F

    Blown Guys- Which Radiator You Running?

    True. Just curious as I am comparing it to my setup. I run the same thermostat. Just thinking if I should make my life easier and go with the 2 row champion. I can't seem to find a 3 row or 2 row with a 1" tubes that is at or below under 2" thick. Sent from my SM-N920P using Tapatalk
  17. F

    Blown Guys- Which Radiator You Running?

    Which thermostat are you running?
  18. F

    Blown Guys- Which Radiator You Running?

    The oem shroud was notched years ago to clear the crank pulley. I think I need to continue this notch all the way around. Will this negatively affect the cooling benefits brought on by the shroud itself?<br /> <br /> <br /> <br /> Sent from my SM-N920P using Tapatalk Sent from my SM-N920P...
  19. F

    Blown Guys- Which Radiator You Running?

    The old brass radiator....<br /> <br /> <br /> <br /> The American Eagle unit...<br /> <br /> <br /> <br /> Bunch of wiring behind the radiator...<br /> <br /> <br /> <br /> Sent from my SM-N920P using Tapatalk Sent from my SM-N920P using Tapatalk
  20. F

    Blown Guys- Which Radiator You Running?

    @mikestang63 - Why are you considering a larger radiator? Is the Champion 2 row not enough for your needs?
Top Bottom
Back
Forums
Menu