Search results

  1. edbo

    Nitto 315 on 03 Cobra w/stock wheels

    I will add that you'll get your money's worth on the Nittos though as the tires will last a decent amount longer. Mileage from Drag Radials: Nittos>BFGs>MT ET Streets
  2. edbo

    Nitto 315 on 03 Cobra w/stock wheels

    :stupid: Nitto 555 DRs Are Cool!
  3. edbo

    New dyno numbers!!!

    Sweet Numbers! Get that thing hooked up and you might squeeze out a sub-eight or two on the 1/8th.
  4. edbo

    What pistons, rods, and crank to use?

    I've gone .020" over here on my Cobra. Used stock (Forged Steel) crank, Manley Rods & Bearings, JE forged pistons. Real happy! Running Vortech V-2 at 15lbs for over 15k miles, never missed a beat!
  5. edbo

    4.6 2v (non pi) to 4.6 3v swap

    I'm sure if that would be a good swap if it is feasable. I'm sure it would require a new computer. Still not sure how the VCT issues would be handled either. Seems like it would be a real PIA mod though certainly rewarding if it gets pulled off. With the aftermarket finally catching on with...
  6. edbo

    Best intake plenum/TB combo?

    Get the BBK underdrive pulleys. I got them for my '98 GT for like $130 from Summit Racing and the results were pretty noticeable, even on that ol' pig. Not to mention that they dressed up the engine pretty nice too. That leaves $300 bucks to put on exhaust mods. You'll get a lot better...
  7. edbo

    cobra vs gt

    :lol: :lol: That AND that Cobra emblem is smaller than the horse emblem so you have less wind resistance! too!
  8. edbo

    exhaust MOST HP

    :stupid: Get an "X" pipe and SLP! Should run about $500-$600 w/o Cats. I still prefer the ol' "Musclecar Sound" of "H" pipe w/Flowmasters. Sounds SICK as hell off a pair of LT's on a Cobra!
  9. edbo

    Best intake plenum/TB combo?

    Here's links to the plenum showdowns on the ModularDepot site: First Test: http://www.modulardepot.com/?show=articlesdet&aid=30 Second Test: http://www.modulardepot.com/?show=articlesdet&aid=38
  10. edbo

    Anyone running BBK ceramic coated Long tubes, please come in..

    Had mine on for 15k miles and getting some rust at the collectors. I'm just going to try and clean 'em up some and spray them with some high temp paint and see how it goes.
  11. edbo

    Cleaning and protecting convertible top

    Try this link: http://www.autogeek.net/contopcleanp.html I've heard good input on the Mother's stuff.
  12. edbo

    BBK or Accufab?

    The Accufabs are more expensive but IMO they're worth the extra cost. The polished ones really look great if you're trying to make your engine bay look good too!
  13. edbo

    New Summit Racing store just opened in GA

    I went last weekend, nice place to check out. I got Bullit Pedals for my 'Stang, they didn't have the Bullit shift knobs in stock though. The cars and cycles on display there were awesome too, especially with all the grand opening stuff going on.
  14. edbo

    4.10's or 4.30's... Need some help, which is best for me?

    With 4.10s, you'll have a little more gear to work with going into the traps, with 4.30s, you risk having another change in front of you. I think most people seem to be trapping top of 3rd with 4.10s in the 1/4 at around 100-110MPH (Correct me if I'm wrong). With 4.30s you might be having to...
  15. edbo

    which tires for rear?

    255s will fit them pretty good too but that's the most recommended for that rim size. Sucks too, cuz I love my stock rims and have customized them a bit and would have loved to dress 'em up in some 275s g-Force sports.
  16. edbo

    4.10's or 4.30's... Need some help, which is best for me?

    That is good as mine is a daily driver but in your case, I can see why you'd be considering 4.30s. 4.10s are pretty popular, if I were you, I'd at least try to locate a 'Stang club down near where you're located and see if anyone in the club has them installed and see if they'll let you test it...
  17. edbo

    4.10's or 4.30's... Need some help, which is best for me?

    Dude, the 4.10's will do you right. I had them and went to 3.73's (I started with 2.73s) but that's just me and future power adders I have plans for. I thought I had gone a little much on the 4.10s so 4.30s and up would have been sick. It was all I could do to stay hooked up with the 4.10s in...
  18. edbo

    Central Georgia Members

    I used to live in Macon for about ten years. Flag City Mustang Club is listed on MCA's website, Heart of Georgia Mustangs (Warner Robins) isn't listed. http://www.mustang.org/regional_clubs.cfm?state=GA Columbus City Stangz will be at Silver Dollar Raceway in Reynolds I believe Friday...
  19. edbo

    Back from the dyno after PI intake install....

    Had 2.73s on my '98 a while back. Best Mod for mine so far is the 3.73s, a wicked difference. Good luck in getting that PI manifold to kick in.
  20. edbo

    Procharger vs Vortech

    Screw a PI motor.. Get a 4V Cobra Motor and go for broke!
Top Bottom
Back
Forums
Menu