Search results

  1. Daniel50

    throttle body and maf upgrade?

    75mm tb wont kill power on my simple setup?
  2. Daniel50

    throttle body and maf upgrade?

    with the mods in my signature am i at the point where i should upgrade to a 70mm throttle body and a bigger maf and some 24 lb injecotors?
  3. Daniel50

    Cast Iron GT40 heads

    they do come with a warranty i think. mine were in great shape when i got them and i used those heads, a b cam, 1.7 rockers, and a trickflow street heat, with stock fuel pump, clutch, injecotrs, maf, tb and ran a 12.8@106mph untuned with no idea what fuel pressure is or timing. so they...
  4. Daniel50

    please help! clutch problems

    i bought a king cobra clutch kit and a ram pilot bearing hopefully this will fix the problem
  5. Daniel50

    Cast Iron GT40 heads

    i got my gt-40p heads beand new from tri state cylinder head. they have upgraded springs, bigger valves, and a 5 angle valve job for 550 shipped and 1.72 fms rockers used for 100 dollars.
  6. Daniel50

    Cast Iron GT40 heads

    new or used? used with used 1.7's i say about 400 dollars new with new rockers i say about 800 dollars
  7. Daniel50

    please help! clutch problems

    any other guesses
  8. Daniel50

    please help! clutch problems

    i was at the track and went to shift into 4th and clutch pedal goes straight to the floor. car wont go into gear. then drive the car home without using the clutch. car makes funning squeaking noise when the clutch isnt engaged. then if i slam down on the clutch pedal the clutch engages. and can...
  9. Daniel50

    car wont idle!!

    so had the h/c/i running good and idleing good for a day. went out an raced a few guys. and after the last race the car would not idle. and still wont. you start it up and it dies with no struggle at all. feels like you turn the car off. any ideas
  10. Daniel50

    h/c/i installed!!! problems fixed and had a few runs

    well after 3 days of troubleshooting and the car running extremely rough the car is fixed. turned out to be a bad fuel pressure regulator! car is untuned and not running perfect until it gets tuned on monday but had a few runs with some friends!!! me vs 06 cadillac cts-v 400hp ls2 6 speed. i...
  11. Daniel50

    car runs horrible after h/c/i

    i figured it out!!! bad fuel pressure regulator. problem fixed!
  12. Daniel50

    car runs horrible after h/c/i

    stock maf and stock injectors
  13. Daniel50

    car runs horrible after h/c/i

    cam was installed with the dots lined up. that was tripled checked when we did it. timing is at 14 degrees right now and the timing and distributor and firing order have been checked a thousand times also and its all right. would the computer since its untuned make it run this bad?
  14. Daniel50

    car runs horrible after h/c/i

    so just finished a h/c/i on the 94. B cam, gt-40p heads, street heat intake, 1.7rr. the car runs very rough and misfires like crazy and dumping fuel into the motor. plugs are already fouled and they brand new. smells like fuel also. compression test showed around 150 on all cylinders, no vacuum...
  15. Daniel50

    need help!! 90 degree spark plug wires

    i have gt-40p heads with mac longtubes and went to put the spark plug boots on and they dont fit. i hear you can get 90 degree boots and they fit fine. the whole driver side rubs on the headers and the car is misfiring badly from this. where can i buy these?!
  16. Daniel50

    need help!! 90 degree spark plug wires

    i have gt-40p heads with mac longtubes and went to put the spark plug boots on and they dont fit. i hear you can get 90 degree boots and they fit fine. the whole driver side rubs on the headers and the car is misfiring badly from this. where can i buy these?!
  17. Daniel50

    please help! short belt length

    belt length with no a/c, p/s, or smog pump?
  18. Daniel50

    torqued head down with no washers!!

    just a quick question also. stock irons use no washers, gt40's are iron why would you need washers? dont they just protect the heads?
  19. Daniel50

    torqued head down with no washers!!

    i was told moly on both sides of the washers. on the upper bolts to your saying?
  20. Daniel50

    torqued head down with no washers!!

    ok ill do one at a time and use moly lube i hear?
Top Bottom
Back
Forums
Menu