Search results

  1. Jonstantine

    Any cool Mustang Graveyards in Oklahoma?

    theres one in Okay (east of muskogee) for sure im sure there are a few more, but im not sure where they are *looks like my info is a few days late
  2. Jonstantine

    tuning vacuum secondaries

    sorry, i didnt reply sooner. right now i just have internet at work for the most part i ordered the demon tuning book and i hope that will help me some i was going to try a bigger accel pump or smaller squirter but neither oreilly's nor auto zone have any so i figured i would just wait...
  3. Jonstantine

    help me pick a carb...

    call the company you plan to buy the carb from... they will tell you what to get... and i bet its closer to teh 500 cfm range if you dont like that option, ill sell you my 625 road demon for 250 so i can go buy a 525
  4. Jonstantine

    The battery, she won't charge!

    *maybe i should read your whole post before replying but ya, you look like your on the right track
  5. Jonstantine

    Got it fixed!

    i had this problem about a week after you posted.. i had just replaced my alternator and remebered someone saying you should replace your voltage regulator when you replace your alternator. so i figured what the hell, its $12. fixed the problem :) (i think i fried the regulator when i...
  6. Jonstantine

    Help my car idles too high

    when i pull a vacuum line off my carb the idle goes up on mine too (on my new demon)
  7. Jonstantine

    tuning vacuum secondaries

    another idea... could the vacuum advance not be kicking in fast enough for the demon? 4secondsflat.com mentions something about the demons being radically different in that department than your standard holley or ebrock. hopefully, i will get to talk to them on monday; and they might have...
  8. Jonstantine

    tuning vacuum secondaries

    well, before you sell it; let me try a different squirter i dont understand how you eliminated the accel pump as being the problem, but i also am not a carb expert by any means (just stupid enough to mess with em) *well, i think i do understand - but im going to try and hope anyway and if...
  9. Jonstantine

    tuning vacuum secondaries

    well, i dont believe the spring has anything to do with my problem... im going to put the purple spring in I think just because i probably dont need the full flow of the stock yellow spring (although since mine was used, im not sure the yellow spring is the same as the spring that came in the...
  10. Jonstantine

    tuning vacuum secondaries

    tweet, can you tell me your setup? and great68, what do you have your float levels and idle screws set at? well, all the info i previously had in this post is kinda out the window because of a bad gasket on the float adjustment floats are 3/4 down on site glass right after last test (i...
  11. Jonstantine

    tuning vacuum secondaries

    im sorry, i realized i left out a critical detail it doesnt mess up when i first floor it; it does ok. generally, i start at 2000 rpms even when i start at 3000 rpms, it doesnt sputter till 3500 and gets going good at 4k i tried a lighter spring tonight, i dont think it worked but i...
  12. Jonstantine

    tuning vacuum secondaries

    ive played with the pump linkage, but i thought you tune the pump for best 60' time? im going to the auto stores around 6pm and ill try to get the spring kit - ill let you guys know the results (especially if it doesnt work)
  13. Jonstantine

    tuning vacuum secondaries

    ok, well i bought a used 625 road demon off of ebay... probably not the best idea, but i saved $75 or so well, i got the idle, and butterfly positions pretty close i think timing is set ok and the gas is about as low as you can go on the siteglass ive tried the floats in the middle and...
  14. Jonstantine

    K&N is my Friend

    thats what edelbrock says its rated for... but i havent seen them use it too much and i hear bad things about foam flow having said that - i have the thing and i like the way it looks well, after a while i wanted to see how well it flowed... the foam on it is like 2" thick and i took an...
  15. Jonstantine

    matching parts...

    what gearing and transmission do you have? how long is it going to be until you can get the new heads? if its a long time and or your gearing is high that cam will be too big for a good street engine. which brings another question, whats the intended use for this motor?
  16. Jonstantine

    1/4 mile times with stock C4 stock converter

    what was your 60' time and your 1/8 time and mph? also, edelbrocks are mechanical secondaries i ran a 15.3 at 93 stock heads, 2.8 gear, 204 intake at .050 my carb bogs - 2.55 60' i think you ran a good time for having ps and ac and lower gears will probably hurt your mileage
  17. Jonstantine

    Back to the track #7..Finale

    i think he means owned as in "it was his" not, he beat it down
  18. Jonstantine

    I am so damn happy!

    im sorry, but im pretty sure a stock 2/3 na couldnt even beat a 94-98 v6 matter of fact, it wouldnt be close
  19. Jonstantine

    Car's a pos...

    another idea with the tranny - check your shifter linkage and kickdown linkage ooooh - also the bands get under your car and look to see if any studs have backed out of your tranny theres one on each side - one controlls reverse and one controlls second i thought i had busted my tranny, but...
  20. Jonstantine

    Car's a pos...

    blakes idea about the taillights is an excellent one and i like the car how it is for the most part i hate how everyone on this forum seems to want everyone to have the same looking car... im almost sick of TT2's but when i was 17 that was the wheel i wanted the most i bet its your intake...
Top Bottom
Back
Forums
Menu