Search results

  1. BrothersPerformance

    Gas Hog After Intake Manifold Replacement

    You are dumping a lot of fuel. Your local auto parts store should be able to check the engine codes for free. How did you clean the injectors? Double check all your hose and electrical connections.
  2. BrothersPerformance

    5 Or 6 Quarts Of Oil???

    Put in 5 quarts, run the car for about 30 seconds, turn it off. Wait for a little bit and check the level. Add as necessary.
  3. BrothersPerformance

    Engine Coolant

    Many people have had success with just burping the system. When the vehicle is cold, take off the radiator cap and start squeezing the upper and lower radiator hoses. If there is any air trapped you will see bubbles. Squeeze until there are no more bubbles.
  4. BrothersPerformance

    2006 V6 Spits Out Coolent, Temp Ok

    Can you see where the leak is coming from? If not, I would get a coolant pressure tester and find the leak.
  5. BrothersPerformance

    Torq Tek Superchanger Used What Should I Know

    I would use a straight edge on the manifold to make sure it is not warped. Bring feeler gauges.
  6. BrothersPerformance

    02 Mustang Gt Feels Sluggish

    Glad to hear it was resolved!
  7. BrothersPerformance

    2006 Mustang Convertible V6 With Strange Fluid Leak

    Have you had anything done to the coolant system recently? Signs of a head gasket going bad would be: Coolant leaking externally from bellow the exhaust manifold White smoke from the exhaust Overheating engine Bubbles in the radiator or coolant overflow tank White milky oil I would get a...
  8. BrothersPerformance

    Suspension Wheel Shake....help!

    How many miles are on the car now? I would get the car on a lift or some jack stands and take a look. You can physically see whether the control arm is bent or if the bushings are cracked or dry rot. While it's up in the air do what I suggested to Red Pony and shake the wheel left and right as...
  9. BrothersPerformance

    Difference Between 2001 And 2002 Gt

    The 2001 may have a T45 or a TR3650 transmission. The T45 uses a 10.5" clutch. The TR3650 uses an 11" clutch.
  10. BrothersPerformance

    Handling? Lowering?

    Lowering kits pretty much take the guess work out of lowering the car. Most kits are packaged with parts that compliment each other. Eibach has a wide variety of kits that can also include front and rear sway bars. With coilovers, depending on what brand you go with, provides a lot more...
  11. BrothersPerformance

    New Member Not Sure If Mustang Is Right For Me...

    Good luck today! Let us know how it goes.
  12. BrothersPerformance

    Need An Intake Manifold

    I think what they are trying to explain is that a new PI intake manifold with new gaskets is more cost effective. If you are planning to upgrade then there is a lot more to the intake manifolds from Edelbrock or Trickflow then there is more than just the manifold.
  13. BrothersPerformance

    Please Help - O2 Sensors Gone Bad?

    I suggest what Three50won said and see if you can use a scan tool to see exactly what the oxygen sensors are doing. What are the engine codes?
  14. BrothersPerformance

    New To The Mustang Community

    Welcome! What are you looking to do with the car? Power? Handling? For more power, the most popular modifications are the typical bolt-ons such as cold air kits, throttle body, intake manifold, mid-pipe and cat back exhausts along with a programmable tuner. For handling, a good set of...
  15. BrothersPerformance

    New Member Not Sure If Mustang Is Right For Me...

    It sounds as if you have talked yourself into getting the Mustang! I think you would be surprised if you took a test drive of the Mustang Ecoboost. They are becoming very popular. Those wheels will fit the 2015 V6. Our shop car has the performance package wheels from the factory and it looks...
  16. BrothersPerformance

    01 Mustang Gt Rebuild, Is It Worth It?

    The truth is you will probably not going to get what you put into it. Upgrades don't usually add value to the car. Sometimes it even lowers it. Some people see that the car has been modified and think that it has been abused/hot rodded. Unless the car has sentimental value, I would just use the...
  17. BrothersPerformance

    Motor Swap

    It will fit but there will be other modifications and things that you will have to purchase such as a wiring harness/PCM, driveshaft, engine mounts, headers and possibly k-member/front suspension.
  18. BrothersPerformance

    2004 Mustang P0175

    The rattling sound could be the catalytic converters coming apart. It does sound like a fair price if you are getting two new catalytic converters plus install. Another thing to think about is maybe purchasing a new mid-pipe. It will come with new catalytic converters plus you will gain a small...
  19. BrothersPerformance

    South East Cars & Coffee 9/12 @ Brothers Performance

    Every Second Saturday of each month Brothers Performance will host a Cars & Coffee event at our showroom in Deland Florida. Free coffee will be provided as well as free dyno runs on a first come, first served basis (Limited Availability). 2-wheel drive vehicles only, excluding diesels. Street...
  20. BrothersPerformance

    Drivetrain Is My Clutch Fork Supposed To Do That?

    With no lubrication it will wear out faster and it could possibly get worse thus leading to driveability issues. I would take care of it ASAP.
Top Bottom
Back
Forums
Menu