Search results

  1. 7

    Tubular K-Member Kits

    I have a Pa- racing k-member. very nice piece. My only complant is the wait for it to be shipped. But it was exspected because thier k-members are made to order. I think it took 3 weeks for mine to show, very eazy to install, but I had the motor out for winter rebuild. Pa-racing kit will...
  2. 7

    Granantelli

    I personally went with a PA racing k-mamber, My buddy has one on his car and recomended them for me. I have had no problems, and Pa racing k-memeber will keep your suspension in the stock location. Pa Racing K-mamber will not do this. It cost me around 250$, and 3 weeks. They build to the...
  3. 7

    torque converter which one? how it works?

    2200 is not better than stock. I would at least get 2600 stall. But only a good converter builder can tell you what you need. This is a good example of a cheap converter. Just because the car has a stall of 3000 it should move long before 3000stall. Normal driving conditions should not...
  4. 7

    Getting Ready for the Vortech :D

    Don't know what you mean by this, You must be getting the Vortec used because they don't make a A-trim anymore, It was replaced with the SC-trim. But the vortec should not come with a oil relocation kit. The prevoius owner must have bought this seperate and is now giving it to you. Unless you...
  5. 7

    thinkin about supercharging(v1-A trim)

    Yea, I would still think you would need the fmu, Specaily since you wont to go with 9psi. I think you would need around 42# to get away with 9psi. :shrug: One thing you could do is get a leaner fmu, I believe the a-trim comes with a 12:1 you could get maybe a 8:1 kit with the 30#
  6. 7

    shift light

    Yes, That is the one I run on both my cars. works great, Very easy hook up. If you have a aftermarket ignition like MDS or Crane, it would be even be easier. I just mounted mine on the dash next to my convertible top switch. My brother inlaw runs the same light too. He did a pretty slick...
  7. 7

    Water pump install

    :eek: :D :lol: :lol: :lol: :hail2: :bang: Sorry, Typo I ment Chilton's
  8. 7

    torque converter which one? how it works?

    Your description of how it works is the basics. Now for stall speed? Stall speed is described as the amount of rpms your tack would flash to before the car puts power to the wheels. (When you mash to the pedal to launch.) The torque converter builder can change the stall in a converter...
  9. 7

    Water pump install

    First off you need to get a clintons manaul or something from your local parts store. This will help your alot in the future. Other than that it is pretty straight forward. Unbolt everything the is in the way. Take the waterpump off. Clean all the surfaces up. Bolt up the new one...
  10. 7

    gears ?

    My answer would be: It depends on how hard you push on the gas pedal :lol: :lol: :lol:
  11. 7

    Starting/Ignition/Electrical problem.......NEED HELP

    I personnaly would fix the problem before you create a bunch of new one, than it will help you locate the problem eazier. My brother in-law had the same problem as you with his 95', It took him awhile to trace it down, but turned out to be a bad chassis ground or fuse link. Something for the...
  12. 7

    HELP! bad vibration

    Good Question: It could just be a unbalanced tire.
  13. 7

    Aftermarket and Mustangs don't mix....

    I guess I'm just having a hard time picturing your problem with the bolts on the lower control arms. Not sure what you mean. I went with a PA Racing tubular k-member and had no problems with the fit or with control arm bolts. I reused my factory bolts.:shrug:
  14. 7

    ran a 07 Monte SS

  15. 7

    Manual Valve Body guys ... talk to me!

    All thow not sure what the difference is, but I believe a 4R70w is just a AODE. Here is a link to Lentech's site they list the AODE/4R70w valvebodies as the same.http://www.lentechautomatics.com/aodproducts.html
  16. 7

    Pullin the tremac

    7000-AOD-STP AOD Street Terminator PLUS Transmission.......Now 1000hp Rated! $2995.00 Is a 1000hp rating enough. Lentech is the best and you get what you pay for. With the AOD you will get the overdrive you wont get with the C4. I had a lentech terminator in a completely stock...
  17. 7

    MSD location?

    Mine is in driverside fender next to the horn. Mounted on the inner fender where the battery sits in the engine bay. (where the washer fluid goes) could give pics tommorrow.
  18. 7

    Manual Valve Body guys ... talk to me!

    I would recommend a Lentech Auto/manual valve body for a daily driver. I have had a lentech street/strip terminator in a past mustang that I loved but They are not cheap. With the Auto/Manual valvebody You can shift it manually, and it will shift hard every gear. Or you can just...
  19. 7

    OPTIMA owners!

    I have a red top in my mustang, and love it had a yellow top in my R/T for about 5 years never had a problem. The battery went with the truck when I sold it.
  20. 7

    Which strut tower brace will fit?

    I too I'm looking for a brace to clear my trickflow intake. The onlt one that I have found so far that might work is HPM out of Omaha NE. Makes a 2-point strut brace. Strut to strut only. Other than that Maximum motor sports may fit but not sure, thier brace does have a wider mounting...
Top Bottom
Back
Forums
Menu