Search results

  1. 88GT17MA

    Build Thread My Never Ending 89 Notch Thread

    Awesome car what color is the paint?
  2. 88GT17MA

    Bad computer? need some wiring help

    I understand where the ground goes, I am just trying to figure out which wire is the ECU ground wire. If I have this correctly.....there are two black wires coming out of the driver side harness which are paired together and both have eye connectors which bolt to the chassis. Aside from these...
  3. 88GT17MA

    Bad computer? need some wiring help

    I have been doing some more research. I think my EEC is not grounded correctly. I thought the EEC is grounded by the two black wires that bolt to the chassis. Is there also another ground for the EEC connected to the circle connector off of the wiring harness?
  4. 88GT17MA

    Bad computer? need some wiring help

    I am having strange issues with my 1987 lx. First I was not getting any power to my fuel pump, in diagnosing this I realized the computer did not have power either. The wiring harness was a little hacked and what I believe to be the EEC power wire (blue fusible link) was not connected. Without...
  5. 88GT17MA

    Driveline vibration at higher speeds...

    Am I missing something? How does this work? do you keep the clamp tight at 12 and then drive? and see if it moves?
  6. 88GT17MA

    Looking for pics, white mustang....

    Thanks for the pics guys, does anyone know what kind of paint/powdercoat is on that black engine in the white coupe? Looks like a flat black?
  7. 88GT17MA

    Looking for pics, white mustang....

    Thanks for the replys, I can imagine it but it would be nice to see it actually on a car. No pics of the coupe?
  8. 88GT17MA

    Looking for pics, white mustang....

    Does anyone have any pics of a white mustang with a black engine bay? I would like to see what it looks like....
  9. 88GT17MA

    Gas leak, how could this happen?

    Yeah its very strange, I just dont get it. I did take the tank out of the car to put in a new fuel pump. It was leaking alot, not just a drip, made a nice puddle very quickly at the gas station. So weird though, I filled it up and it wasnt leaking anymore, drove it home and it was all dry. I...
  10. 88GT17MA

    Gas leak, how could this happen?

    So I went for a 50 mile drive home yesterday. Needed gas so I stopped off in my town (after the 50 mile drive). When I pulled in a guy came up to me and said there was gas leaking out of the back, especially when I took a turn. So I look and sure enough the tank is all wet/dripping gas. So...
  11. 88GT17MA

    FFW New Hampshire

    I will prob be there, but I dont really know anyone that is going to be there. Finally got my turbo stang running. How do you get into the races?
  12. 88GT17MA

    need some help with gauge install!!

    Use a T fitting in the stock sender location.
  13. 88GT17MA

    Overheating problem

    With that setup it should not be getting that high. I would check to see if you have air in the cooling system. Your headgasket isn't on backwards right?
  14. 88GT17MA

    Need help with rear drum brakes

    I have a quick question. If I remove the drum can I adjust the rear brake without removing the springs and shoes? Im going to put in new shoes soon but I just want to adjust them tonight so I can get my e-brake working for inspection. Thanks for any help...
  15. 88GT17MA

    Turn Signal

    You have an issue with your ignition switch.
  16. 88GT17MA

    Some pics of my Sat. Dez racing & The pike

    Hey hissing, that capri was a customers car. The guy was getting springs installed.
  17. 88GT17MA

    Went back to the dyno....

    Do you still have the stock tranny and rearend in the car? I noticed the alum d/s when it was on the lift....
  18. 88GT17MA

    Went back to the dyno....

    Yep, boost gets you laid.
  19. 88GT17MA

    Went back to the dyno....

    I used my old bbk shorty headers. I know a guy from florida who does some really good tig welding. He welded the crossover and turbo flange. I built everything else. Im sure you have all the supporting mods for a turbo....:rolleyes: .
  20. 88GT17MA

    Went back to the dyno....

    I've become friends with them just through having them work on my car. It has been there for about a month getting odds and ends tied up. It's a single turbo, t70, stock block, tw heads, holley intake, shooting for around 500hp. They are def. cool guys over there, your car looked very...
Top Bottom
Back
Forums
Menu