Search results

  1. bit

    Where's the MAF on the 05's?

    The 92-93 LT1s were SD and the 94 ups were mass air.
  2. bit

    Building a High Revving 5.0 How to's:

    How high reving are you wanting to go? I spin mine to 6500rpms with stock(rebuilt) bottom end, Steeda #19, and 10psi of boost. On the dyno she was still pulling hard at 6500RPMs.
  3. bit

    Broken vacuum lines *pics*

    You will just have to replace them with regular rubber vacuum hose. I tried a few years back to find a replacement for mine. Ford calls it the vacuum harness, they don't make a replacement nor does Autozone and the like.
  4. bit

    Best Supercharger For the 5.0

    Mine is making a consistent 10psi with the stock 6rib 3.33" blower pulley and a 7inch crank with the belt as tight as I normally have it on the street. I was standing in front of my car on the dyno and I could see the belt slipping. I am going to order a Gatorback belt this week and put a...
  5. bit

    Post your rwhp/rwtq

    I guess I could post my old NA combo. From what I have seen this is far from normal, but it will give you an idea of how far stock heads and cam can take you. I have a friend with a 302 GT-40X heads, Cobra intake, e-cam, pulleys and all the supporting goodies making 266RWHP and 310RWTQ. That...
  6. bit

    Post your rwhp/rwtq

    Not a NA combo, but since you asked. Engine Modifications: - 302 built summer 03 about 2500 miles - K&N - Custom Power Pipe - Aluminum 3 Row Radiator - 9mm FMS Wires - 180* Thermostat - Perma Cool electric fan - C&L 76mm Mass Air - FMS 65mm throttle body - FMS GT-40 Upper/Lower Intake...
  7. bit

    Cleaning gunk off valves

    Yep that is the best way.
  8. bit

    bosch vs. motorsport injectors

    It sprinkled snow around here today and everyone goes crazy like Armageddon is coming. I bet the grade schools will be canceled tomorrow. I don’t have to make up the days I miss, but I don’t have to worry about it because the chancellor won’t cancel classes because there is snow in the grass.
  9. bit

    bosch vs. motorsport injectors

    Yeah the 19's that came out of my car said Delco on them.
  10. bit

    bosch vs. motorsport injectors

    I don't know of an differences between the two, but I have Bosch 36lb injectors in my car. I bought them used of ebay with 20k on them and I have had them for almost a year and put ~6k miles on them with no problems.
  11. bit

    Porting e7's...would you recommend unshrouding the valves?

    It usually only add about 1/4 on a CC to the combustion chamber, but the thing about unshrouding is do you have the room. When I was porting mine I put blue on the head surface and used a head gasket to mark the cylinder wall boundary. When I looked at my heads I had less then a 1/8" to play...
  12. bit

    Pulling Codes without a Scan Tool?

    Ttt
  13. bit

    Pulling Codes without a Scan Tool?

    I think I know which connections to jump, but I have forgotten the sequence with the key. Can anyone write out the procedure or point me to a site that has it? Thanks Brent
  14. bit

    Coolent Temp Sensor(s)

    Thanks man that helps a lot. I guess it is time for a new sensor.
  15. bit

    Coolent Temp Sensor(s)

    I am thinking there should be two sensors. One for the computer and one for the gauge. A resistance sensor cannot be shared, but I only know of one coolant temp sensor. The guage reads fine but the car is running very rich and is putting out code 56.
  16. bit

    Coolent Temp Sensor(s)

    Yeah it's only $5 you can send it to my Paypal account [email protected] I'll be looking for the money. Can anyone offer some real help? Thanks Brent
  17. bit

    Coolent Temp Sensor(s)

    I am pretty sure my coolant temp sensor has gone bad, but I want to make sure before I replace it. Does anyone have a resistance range for this sensor? There is probably one in the Ford Service manual but mine is at my parent’s house and I am at school. Or could someone measure their sensor...
  18. bit

    whining T5 - Redline?

    I called redline a few years ago about what oil there recommended for a street driven and occasionally track driven manual trans. The engineer I talked to said the best thing would be their Light Shockproof Gear oil. I put it in my T-5 and a few other manuals they all shift a lot smoother...
  19. bit

    Wingless GT pics

    I want one without a wing. I think it looks a lot better on the current model as well.
  20. bit

    FS: Fox-Body Leather Seat Upholstery.

    leathe interior If you still have the leather interior. Please contact me with price @ [email protected]
Top Bottom
Back
Forums
Menu